xlat_tables_v2: add enable_mmu()

enable_mmu_* has a different function name, so it is not handy in the
shared code. enable_mmu() calls an appropriate one depending on the
exception level.

Change-Id

xlat_tables_v2: add enable_mmu()

enable_mmu_* has a different function name, so it is not handy in the
shared code. enable_mmu() calls an appropriate one depending on the
exception level.

Change-Id: I0657968bfcb91c32733f75f9259f550a5c35b1c3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Add get_current_el_maybe_constant()

There are some cases where we want to run EL-dependent code in the
shared code.

We could use #ifdef, but it leaves slight possibility where we do not
know the ex

Add get_current_el_maybe_constant()

There are some cases where we want to run EL-dependent code in the
shared code.

We could use #ifdef, but it leaves slight possibility where we do not
know the exception level at the build-time (e.g. library code).

The counter approach is to use get_current_el(), but it is run-time
detection, so all EL code is linked, some of which might be unneeded.

This commit adds get_current_el_maybe_constant(). This is a static
inline function that returns a constant value if we know the exception
level at build-time. This is mostly the case.

if (get_current_el_maybe_constant() == 1) {
/* do something for EL1 */
} else if (get_current_el_maybe_constant() == 3) {
/* do something for EL3 */
}

If get_current_el_maybe_constant() is build-time constant, the compiler
will optimize out the unreachable code.

If such code is included from the library code, it is not built-time
constant. In this case, it falls back to get_current_el(), so it still
works.

Change-Id: Idb03c20342a5b5173fe2d6b40e1fac7998675ad3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Build: define IMAGE_AT_EL1 or IMAGE_AT_EL3 globally for C files

The build system defines the IMAGE_BL* macro when compiling each image.
This is useful to distinguish which image the current file is

Build: define IMAGE_AT_EL1 or IMAGE_AT_EL3 globally for C files

The build system defines the IMAGE_BL* macro when compiling each image.
This is useful to distinguish which image the current file is being
built for by using #if defined(IMAGE_BL2) or #if defined(IMAGE_BL31),
or whatever.

There are some cases where we are more interested in which exception
level the current file is being built for.

include/lib/cpus/{aarch32,aarch64}/cpu_macros.S defines IMAGE_AT_EL3,
but we do not have it globally.

Pass IMAGE_AT_EL1 or IMAGE_AT_EL3 to BL*_CFLAGS so that it is available
from all C code.

The library code (libc.a, libmbedtls.a, etc.) is exceptional cases,
where the code can be shared between BL images.

Other than that, we know the exception level at the build time, and
this macro will be useful in the shared code.

Change-Id: I7c8a1da10726906adfba981cfe8464dff111d6b0
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge "plat/sgm775: Add support for dynamic config using fconf" into integration

plat/sgm775: Add support for dynamic config using fconf

1. Necessary changes to platform makefile to include fw_config
device tree and package it in fip.bin

2. Removed hw_config node from fw_config

plat/sgm775: Add support for dynamic config using fconf

1. Necessary changes to platform makefile to include fw_config
device tree and package it in fip.bin

2. Removed hw_config node from fw_config dts as there is no
HW_CONFIG device tree source for sgm775

3. Added mbedtls_heap related properties for TBBR functionality

Change-Id: I26b940c65b17ad2fb5537141f8649785bb0fd4ad
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge "Flush dcache when storing timestamp" into integration

Merge changes from topic "ddr_map" into integration

* changes:
stm32mp1: use stm32mp_get_ddr_ns_size() function
stm32mp1: set XN attribute for some areas in BL2
stm32mp1: dynamically map DDR l

Merge changes from topic "ddr_map" into integration

* changes:
stm32mp1: use stm32mp_get_ddr_ns_size() function
stm32mp1: set XN attribute for some areas in BL2
stm32mp1: dynamically map DDR later and non-cacheable during its test
stm32mp1: add a function to get non-secure DDR size

show more ...

Create separate header for ARM specific SMCCC defines

Moved SMCCC defines from plat_arm.h to new <smccc_def.h> header
and include this header in all ARM platforms.

Signed-off-by: Manish V Badarkhe

Create separate header for ARM specific SMCCC defines

Moved SMCCC defines from plat_arm.h to new <smccc_def.h> header
and include this header in all ARM platforms.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4cbc69c7b9307461de87b7c7bf200dd9b810e485

show more ...

TF-A GICv3 driver: Introduce makefile

This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affectin

TF-A GICv3 driver: Introduce makefile

This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.

NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.

Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Merge "plat/arm/sgi: fix the incorrect check for SCMI channel ID" into integration

plat/arm/sgi: fix the incorrect check for SCMI channel ID

Use ARRAY_SIZE macro instead of sizeof operator to obtain the maximum
number of SCMI channels supported on the platform.

Change-Id: Id922bb

plat/arm/sgi: fix the incorrect check for SCMI channel ID

Use ARRAY_SIZE macro instead of sizeof operator to obtain the maximum
number of SCMI channels supported on the platform.

Change-Id: Id922bb548af98ac99b4ac0c34e38e589e5a80b2d
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

show more ...

Merge changes from topic "os/bl31-fpga-port" into integration

* changes:
plat/arm/board/arm_fpga: Compile with additional CPU libraries
plat/arm/board/arm_fpga: Enable position-independent execu

Merge changes from topic "os/bl31-fpga-port" into integration

* changes:
plat/arm/board/arm_fpga: Compile with additional CPU libraries
plat/arm/board/arm_fpga: Enable position-independent execution
plat/arm/board/arm_fpga: Enable port for alternative cluster configurations
plat/arm/board/arm_fpga: Initialize the Generic Interrupt Controller
plat/arm/board/arm_fpga: Initialize the System Counter
plat/arm/board/arm_fpga: Add PSCI implementation for FPGA images
plat/arm/board/arm_fpga: Use preloaded BL33 alternative boot flow
plat/arm/board/arm_fpga: Enable basic BL31 port for an FPGA image

show more ...

Merge "Changelog updates for recent commits" into integration

Merge "doc: add spm and spmd related build options" into integration

Flush dcache when storing timestamp

On DynamIQ CPU FVPs, stats test cases are failing when
hardware-assisted coherency is enabled due to a corrupt
timestamp value. Investigation of the issue indicat

Flush dcache when storing timestamp

On DynamIQ CPU FVPs, stats test cases are failing when
hardware-assisted coherency is enabled due to a corrupt
timestamp value. Investigation of the issue indicates that
on these models the timestamp value is stored in cache
instead of memory. This patch flushes the dcache when the
timestamp is stored to make sure it is stored in memory.

Change-Id: I05cd54ba5991a5a96dd07f1e08b5212273201411
Signed-off-by: Zelalem <zelalem.aweke@arm.com>

show more ...

Merge "fconf: notify if fw_config dt is not used" into integration

doc: add spm and spmd related build options

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I93892dbe76611a7a4b852af3272a0e6271ae037b

fconf: notify if fw_config dt is not used

Notify if fw_config dt is either not available or not loaded from fip.

Change-Id: I4dfcbe5032503d97f532a3287c5312c581578b68
Signed-off-by: Manish Pandey <m

fconf: notify if fw_config dt is not used

Notify if fw_config dt is either not available or not loaded from fip.

Change-Id: I4dfcbe5032503d97f532a3287c5312c581578b68
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

show more ...

plat/arm/board/arm_fpga: Compile with additional CPU libraries

This change is part of the goal of enabling the port to be compatible
with multiple FPGA images.

BL31 behaves differently depending on

plat/arm/board/arm_fpga: Compile with additional CPU libraries

This change is part of the goal of enabling the port to be compatible
with multiple FPGA images.

BL31 behaves differently depending on whether or not the CPUs in the
system use cache coherency, and as a result any CPU libraries that are
compiled together must serve processors that are consistent in this
regard.

This compiles a different set of CPU libraries depending on whether or
not the HW_ASSISTED_COHERENCY is enabled at build-time to indicate the
CPUs support hardware-level support for cache coherency. This build
flag is used in the makefile in the same way as the Arm FVP port.

Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: I18300b4443176b89767015e3688c0f315a91c27e

show more ...

plat/arm/board/arm_fpga: Enable position-independent execution

This allows the BL31 port to run with position-independent execution
enabled so that it can be ran from any address in the system.
This

plat/arm/board/arm_fpga: Enable position-independent execution

This allows the BL31 port to run with position-independent execution
enabled so that it can be ran from any address in the system.
This increases the flexibility of the image, allowing it to be ran from
other locations rather than only its hardcoded absolute address
(currently set to the typical DRAM base of 2GB). This may be useful for
future images that describe system configurations with other memory
layouts (e.g. where SRAM is included).

It does this by setting ENABLE_PIE=1 and changing the absolute
address to 0. The load address of bl31.bin can then be specified by
the -l [load address] argument in the fpga-run command (additionally,
this address is required by any preceding payloads that specify the
start address. For ELF payloads this is usually extracted automatically
by reading the entrypoint address in the header, however bl31.bin is a
different file format so has this additional dependency).

Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: Idd74787796ab0cf605fe2701163d9c4b3223a143

show more ...

plat/arm/board/arm_fpga: Enable port for alternative cluster configurations

This change is part of the goal of enabling the port to be compatible
with multiple FPGA images.

The BL31 port that is up

plat/arm/board/arm_fpga: Enable port for alternative cluster configurations

This change is part of the goal of enabling the port to be compatible
with multiple FPGA images.

The BL31 port that is uploaded as a payload to the FPGA with an image
should cater for a wide variety of system configurations. This patch
makes the necessary changes to enable it to function with images whose
cluster configurations may be larger (either by utilizing more
clusters, more CPUs per cluster, more threads in each CPU, or a
combination) than the initial image being used for testing.

As part of this, the hard-coded values that configure the size of the
array describing the topology of the power domain tree are increased
to max. 8 clusters, max. 8 cores per cluster & max 4 threads per core.
This ensures the port works with cluster configurations up to these
sizes. When there are too many entries for the number of available PEs,
e.g. if there is a variable number of CPUs between clusters, then there
will be empty entries in the array. This is permitted and the PSCI
library will still function as expected. While this increases its size,
this shouldn't be an issue in the context of the size of BL31, and is
worth the trade-off for the extra compatibility.

Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: I7d4ae1e20b2e99fdbac428d122a2cf9445394363

show more ...

plat/arm/board/arm_fpga: Initialize the Generic Interrupt Controller

This initializes the GIC using the Arm GIC drivers in TF-A.
The initial FPGA image uses a GIC600 implementation, and so that its

plat/arm/board/arm_fpga: Initialize the Generic Interrupt Controller

This initializes the GIC using the Arm GIC drivers in TF-A.
The initial FPGA image uses a GIC600 implementation, and so that its
power controller is enabled, this platform port calls the corresponding
implementation-specific routines.

Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: I88d5a073eead4b653b1ca73273182cd98a95e4c5

show more ...

plat/arm/board/arm_fpga: Initialize the System Counter

This sets the frequency of the system counter so that the Delay Timer
driver programs the correct value to CNTCRL. This value depends on
the FP

plat/arm/board/arm_fpga: Initialize the System Counter

This sets the frequency of the system counter so that the Delay Timer
driver programs the correct value to CNTCRL. This value depends on
the FPGA image being used, and is 10MHz for the initial test image.
Once configured, the BL31 platform setup sequence then enables the
system counter.

Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: Ieb036a36fd990f350b5953357424a255b8ac5d5a

show more ...

plat/arm/board/arm_fpga: Add PSCI implementation for FPGA images

This adds a basic PSCI implementation allow secondary CPUs to be
released from an initial state and continue through to the warm boot

plat/arm/board/arm_fpga: Add PSCI implementation for FPGA images

This adds a basic PSCI implementation allow secondary CPUs to be
released from an initial state and continue through to the warm boot
entrypoint.

Each secondary CPU is kept in a holding pen, whereby it polls the value
representing its hold state, by reading this from an array that acts as
a table for all the PEs. The hold states are initially set to 0 for all
cores to indicate that the executing core should continue polling.
To prevent the secondary CPUs from interfering with the platform's
initialization, they are only updated by the primary CPU once the cold
boot sequence has completed and fpga_pwr_domain_on(mpidr) is called.
The polling target CPU will then read 1 (which indicates that it should
branch to the warm reset entrypoint) and then jump to that address
rather than continue polling.

In addition to the initial polling behaviour of the secondary CPUs
before their warm boot reset sequence, they are also placed in a
low-power wfe() state at the end of each poll; accordingly, the PSCI
fpga_pwr_domain_on(mpidr) function also signals an event to all cores
(after updating the target CPU's hold entry) to wake them from this
state, allowing any secondary CPUs that are still polling to check
their hold state again.
This method is in accordance with both the PSCI and Linux kernel
recommendations, as the lessened overhead reduces the energy
consumption associated with the busy-loop.

The table of hold entries is implemented by a global array as shared SRAM
(which is used by other platforms in similar implementations) is not
available on the FPGA images.

Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: I65cfd1892f8be1dfcb285f0e1e94e7a9870cdf5a

show more ...

plat/arm/board/arm_fpga: Use preloaded BL33 alternative boot flow

This makes use of the PRELOADED_BL33_BASE flag to indicate to BL31 that
the BL33 payload (kernel) has already been loaded and reside

plat/arm/board/arm_fpga: Use preloaded BL33 alternative boot flow

This makes use of the PRELOADED_BL33_BASE flag to indicate to BL31 that
the BL33 payload (kernel) has already been loaded and resides in memory;
BL31 will then jump to the non-secure address.

For this port the BL33 payload is the Linux kernel, and in accordance
with the pre-kernel setup requirements (as specified in the `Booting
AArch64 Linux' documentation:
https://www.kernel.org/doc/Documentation/arm64/booting.txt),
this change also sets up the primary CPU's registers x0-x3 so they are
the expected values, which includes the address of the DTB at x0.

An external linker script is currently required to combine BL31, the
BL33 payload, and any other software images to create an ELF file that
can be uploaded to the FPGA board along with the bit file. It therefore
has dependencies on the value of PRELOADED_BL33_BASE (kernel base) and
the DTB base (plus any other relevant base addresses used to
distinguish the different ELF sections), both of which are set in this
patch.

Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: If7ae8ee82d1e09fb05f553f6077ae13680dbf66b

show more ...