maintainers: step down as code owner of UniPhier platform

I am leaving Socionext. Orphan the UniPhier platform until somebody
takes the role.

Change-Id: I54d3da6d49c1ccaaa475431654db578b683db88a
Si

maintainers: step down as code owner of UniPhier platform

I am leaving Socionext. Orphan the UniPhier platform until somebody
takes the role.

Change-Id: I54d3da6d49c1ccaaa475431654db578b683db88a
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge changes from topic "tegra-downstream-08252020" into integration

* changes:
Tegra194: remove unused tegra_mc_defs header
Tegra: memctrl: platform setup handler functions
Tegra194: memctrl

Merge changes from topic "tegra-downstream-08252020" into integration

* changes:
Tegra194: remove unused tegra_mc_defs header
Tegra: memctrl: platform setup handler functions
Tegra194: memctrl: remove streamid security cfg registers
Tegra194: memctrl: remove streamid override cfg registers
Tegra: debug prints indicating SC7 entry sequence completion
Tegra194: add strict checking mode verification
Tegra194: memctrl: update TZDRAM base at 1MB granularity
Tegra194: ras: split up RAS error clear SMC call.
Tegra: platform specific GIC sources
Tegra194: add memory barriers during DRAM to SysRAM copy
Tegra: sip: add VPR resize enabled check
Tegra194: add redundancy checks for MMIO writes
Tegra: remove unused cortex_a53.h
Tegra194: report failure to enable dual execution
Tegra194: verify firewall settings before resource use

show more ...

Merge changes from topic "tc0/dts" into integration

* changes:
fdts: tc0: add support for cpu-idle-states
fdts: tc0: Add node for mmc

Remove Jack Bond-Preston as CMake Build Definitions code owner

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I542ec3cf1bb929a5656dda6dbad816b69837c646

sp_min: Avoid platform security reconfiguration

In the case of Juno AArch32, platform security configuration
gets done from both BL2 and SP_MIN(BL32) components when
JUNO_AARCH32_EL3_RUNTIME and RES

sp_min: Avoid platform security reconfiguration

In the case of Juno AArch32, platform security configuration
gets done from both BL2 and SP_MIN(BL32) components when
JUNO_AARCH32_EL3_RUNTIME and RESET_TO_SP_MIN build options
are set.
Fix is provided to avoid Platform security configuration from
SP_MIN when it is already done in BL2.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I702e91dacb4cdd2d10e339ddeaea91289bef3229

show more ...

plat/arm: Get the base address of nv-counters from device tree

Using the Fconf, register base address of the various nv-counters
(currently, trusted, non-trusted nv-counters) are moved to the
device

plat/arm: Get the base address of nv-counters from device tree

Using the Fconf, register base address of the various nv-counters
(currently, trusted, non-trusted nv-counters) are moved to the
device tree and retrieved during run-time. This feature is
enabled using the build option COT_DESC_IN_DTB.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I236f532e63cea63b179f60892cb406fc05cd5830

show more ...

dtsi: Update the nv-counter node in the device tree

Created a header file defining the id of the various nv-counters
used in the system.
Also, updated the device tree to add 'id' property for the tr

dtsi: Update the nv-counter node in the device tree

Created a header file defining the id of the various nv-counters
used in the system.
Also, updated the device tree to add 'id' property for the trusted
and non-trusted nv-counters.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia41a557f7e56ad4ed536aee11c7a59e078ae07c0

show more ...

doc: Update the cot-binding for nv-counter node

Updated the cot-binding documentation to add 'id'
property for the trusted and non-trusted nv-counters.

Signed-off-by: Manish V Badarkhe <Manish.Bada

doc: Update the cot-binding for nv-counter node

Updated the cot-binding documentation to add 'id'
property for the trusted and non-trusted nv-counters.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If1c628c5b90fe403dd96c7cd0cd04f37288c965c

show more ...

Tegra194: remove unused tegra_mc_defs header

This patch removes the unused header from the Tegra194
platform files. As a result, the TSA MMIO would be
removed from the memory map too.

Change-Id: I2

Tegra194: remove unused tegra_mc_defs header

This patch removes the unused header from the Tegra194
platform files. As a result, the TSA MMIO would be
removed from the memory map too.

Change-Id: I2d38b3da7a119f5dfd6cfd429e481f4e6ad3481e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: memctrl: platform setup handler functions

The driver initially contained the setup steps to help Tegra186
and Tegra194 SoCs. In order to support future SoCs and make sure
that the driver rema

Tegra: memctrl: platform setup handler functions

The driver initially contained the setup steps to help Tegra186
and Tegra194 SoCs. In order to support future SoCs and make sure
that the driver remains generic enough, some code should be moved
to SoC.

This patch creates a setup handler for a platform to implement its
initialization sequence.

Change-Id: I8bab7fd07f25e0457ead8e2d2713efe54782a59b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra194: memctrl: remove streamid security cfg registers

The stream ID security configuration settings shall be done by the
previous level bootloader. This change removes the same settings
from the

Tegra194: memctrl: remove streamid security cfg registers

The stream ID security configuration settings shall be done by the
previous level bootloader. This change removes the same settings
from the Tegra194 platform code as a result.

Change-Id: Ia170ca4c2119db8f1d0251f1c193add006f81004
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

show more ...

Tegra194: memctrl: remove streamid override cfg registers

The stream ID override configuration is saved during System Suspend
as part MB1 bct. This change removes the same support from the Tegra194

Tegra194: memctrl: remove streamid override cfg registers

The stream ID override configuration is saved during System Suspend
as part MB1 bct. This change removes the same support from the Tegra194
platform code as a result.

Change-Id: I4c19dc0d8b29190908673fb5ed7ed892af8906ab
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

show more ...

Tegra: debug prints indicating SC7 entry sequence completion

This patch adds prints to display the completion of System Suspend
programming sequence for Tegra platforms. The console needs to
be kept

Tegra: debug prints indicating SC7 entry sequence completion

This patch adds prints to display the completion of System Suspend
programming sequence for Tegra platforms. The console needs to
be kept alive until the very end of the System Suspend sequence as
a result.

Change-Id: I8e0e2054a272665d0a067bb894dda1605a9d2eb7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra194: add strict checking mode verification

After enabling the strict checking mode, verify that
the strict mode has really been enabled by querying
the MCE.

If the mode is found to be disabled

Tegra194: add strict checking mode verification

After enabling the strict checking mode, verify that
the strict mode has really been enabled by querying
the MCE.

If the mode is found to be disabled, the code should
assert.

Change-Id: I113ec8decb737f8208059a2a3ba3076fad77890e
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

show more ...

Tegra194: memctrl: update TZDRAM base at 1MB granularity

The Memory controller expects the TZDRAM base value at 1MB granularity
and the current driver does not respect that limitation. This patch
fi

Tegra194: memctrl: update TZDRAM base at 1MB granularity

The Memory controller expects the TZDRAM base value at 1MB granularity
and the current driver does not respect that limitation. This patch
fixes that anomaly.

Change-Id: I6b72270f331ba5081e19811df4a78623e457341a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra194: ras: split up RAS error clear SMC call.

In order to make sure SMC call is within 25us, this patch reduces number of RAS
errors accessed to 8 at most for each SMC call and takes a input/out

Tegra194: ras: split up RAS error clear SMC call.

In order to make sure SMC call is within 25us, this patch reduces number of RAS
errors accessed to 8 at most for each SMC call and takes a input/output
parameter to specify in progress RAS error record index.

The measured SMC call latency is about 20us under Linux test kernel driver.

Change-Id: Ia1b57c8673e0193dc341a36af0b5c09fb48f965f
Signed-off-by: David Pu <dpu@nvidia.com>

show more ...

Tegra: platform specific GIC sources

The TEGRA_GICv2_SOURCES contains the list of GIC sources required
to compile the GICv2 support for platforms.

This patch includes the TEGRA_GICv2_SOURCES macro

Tegra: platform specific GIC sources

The TEGRA_GICv2_SOURCES contains the list of GIC sources required
to compile the GICv2 support for platforms.

This patch includes the TEGRA_GICv2_SOURCES macro from individual
makefiles to allow future platforms to use suport for GICv3.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I429b1a0c7764ab370675f873a50cecda871110cb

show more ...

Tegra194: add memory barriers during DRAM to SysRAM copy

This patch adds memory barriers to the trampoline code copying TZDRAM
contents to SysRAM during exit from System Suspend. These barriers
make

Tegra194: add memory barriers during DRAM to SysRAM copy

This patch adds memory barriers to the trampoline code copying TZDRAM
contents to SysRAM during exit from System Suspend. These barriers
make sure that all the copies go through before we start executing in
SysRAM.

Reported by: Nathan Tuck <ntuck@nvidia.com>

Change-Id: I3fd2964086b6c0e044cc4165051a4801440db9cd
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra: sip: add VPR resize enabled check

The Memory Controller provides a control register to check
if the video memory can be resized. The previous bootloader
might have locked this feature, which

Tegra: sip: add VPR resize enabled check

The Memory Controller provides a control register to check
if the video memory can be resized. The previous bootloader
might have locked this feature, which will be reflected by
this register.

This patch reads the control register before processing
a video memory resize request. An error code, -ENOTSUP,
is returned if the feature is locked.

Change-Id: Ia1d67f7a94aa15c6b18ff5c9b9b952e179596ae3
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

show more ...

Tegra194: add redundancy checks for MMIO writes

MMIO writes should verify that the writes actually went through.
Read the value back after the write operation, perform assert
if the read back value

Tegra194: add redundancy checks for MMIO writes

MMIO writes should verify that the writes actually went through.
Read the value back after the write operation, perform assert
if the read back value is not same as the write value.

Change-Id: Id2ceb014116f3aa6a9e86505ca1ae9911470a679
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

show more ...

Tegra: remove unused cortex_a53.h

This patch removes the unused cortex_a53.h header file from
common Tegra files.

This change fixes the violation of CERTC Rule: DCL23.

Change-Id: Iaf7c34cc6323b780

Tegra: remove unused cortex_a53.h

This patch removes the unused cortex_a53.h header file from
common Tegra files.

This change fixes the violation of CERTC Rule: DCL23.

Change-Id: Iaf7c34cc6323b78028258e188c00724c52afba85
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra194: report failure to enable dual execution

During boot the platform enables dual execution for Xavier CPUs.
This patch reads back the ACTLR_ELx register to verify that the bit
is actually set

Tegra194: report failure to enable dual execution

During boot the platform enables dual execution for Xavier CPUs.
This patch reads back the ACTLR_ELx register to verify that the bit
is actually set. It asserts if the bit is not set.

Change-Id: I5ba9491ced86285d307b95efa647a427ff77c79e
Signed-off-by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>

show more ...

Tegra194: verify firewall settings before resource use

The firewall settings for the hardware resources are present in the
Security Configuration Registers. The firewall settings are programmed
by o

Tegra194: verify firewall settings before resource use

The firewall settings for the hardware resources are present in the
Security Configuration Registers. The firewall settings are programmed
by other software components and so must be verified for correctness
before touching the hardware resources they protect.

This patch reads the firewall settings during early boot and asserts
if the settings mismatch.

Change-Id: I53cc9aeadad32e54e460db0fa2c38e46bcc92066
Signed-off-by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

qti: spmi_arb: Fix coverity integer conversion warnings

Coverity warns about the risk of unintended sign-exension in some of the
calculations in spmi_arb.c. While the actual numbers used are small
e

qti: spmi_arb: Fix coverity integer conversion warnings

Coverity warns about the risk of unintended sign-exension in some of the
calculations in spmi_arb.c. While the actual numbers used are small
enough that this cannot happen in practice, it's still a good idea to
clean them up by explicitly making the constants used unsigned.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia169e0f7c6b01b8041e8029e8c8d30ee596ba30d

show more ...

Merge "n1sdp: remote chip SPI numbering for multichip GIC routing" into integration