feat(sgi): add page table translation entry for secure uart

Add page table translation entry for secure uart so that logs from
secure partition can be routed via the same.

Signed-off-by: Rohit Math

feat(sgi): add page table translation entry for secure uart

Add page table translation entry for secure uart so that logs from
secure partition can be routed via the same.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I8574b31d5d138d9f94972deb903124f8c5b70ce4

show more ...

feat(sgi): route TF-A logs via secure uart

Route the boot, runtime and crash stage logs via secure UART port
instead of the existing use of non-secure UART. This aligns with the
security state the P

feat(sgi): route TF-A logs via secure uart

Route the boot, runtime and crash stage logs via secure UART port
instead of the existing use of non-secure UART. This aligns with the
security state the PE is in when logs are put out. In addition to this,
this allows consolidation of the UART related macros across all the
variants of the Neoverse reference design platforms.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I8896ae05eaedf06dead520659375af0329f31015

show more ...

feat(sgi): deviate from arm css common uart related definitions

The Neoverse reference design platforms will migrate to use different
set of secure and non-secure UART ports. This implies that the b

feat(sgi): deviate from arm css common uart related definitions

The Neoverse reference design platforms will migrate to use different
set of secure and non-secure UART ports. This implies that the board
specific macros defined in the common Arm platform code will no longer
be usable for Neoverse reference design platforms.

In preparation for migrating to a different set of UART ports, add a
Neoverse reference design platform specific copy of the board
definitions. The value of these definitions will be changed in
subsequent patches.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I39170848ecd81a7c1bbd3689bd905e45f9435f5c

show more ...

Merge changes I713f6e93,Iac4fbf4d,I43d02c77,Iadecd544,Ib31f9c4a, ... into integration

* changes:
build(intel): enable access to on-chip ram in BL31 for N5X
fix(intel): make FPGA memory configura

Merge changes I713f6e93,Iac4fbf4d,I43d02c77,Iadecd544,Ib31f9c4a, ... into integration

* changes:
build(intel): enable access to on-chip ram in BL31 for N5X
fix(intel): make FPGA memory configurations platform specific
fix(intel): fix ECC Double Bit Error handling
build(intel): define a macro for SIMICS build
build(intel): add N5X as a new Intel platform
build(intel): initial commit for crypto driver

show more ...

fix(plat/arm): fix SP count limit without dual root CoT

Remove reserved range for platform provider owned SPs if the dual root
CoT is disabled and allow SPs to populate the range up to MAX_SP_IDS.

fix(plat/arm): fix SP count limit without dual root CoT

Remove reserved range for platform provider owned SPs if the dual root
CoT is disabled and allow SPs to populate the range up to MAX_SP_IDS.

Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ib4ec18f6530d2515ada21d2c0c388d55aa479d26

show more ...

fix(fvp): op-tee sp manifest doesn't map gicd

Following I2d274fa897171807e39b0ce9c8a28824ff424534:
Remove GICD registers S2 mapping from OP-TEE partition when it runs in a
secure partition on top of

fix(fvp): op-tee sp manifest doesn't map gicd

Following I2d274fa897171807e39b0ce9c8a28824ff424534:
Remove GICD registers S2 mapping from OP-TEE partition when it runs in a
secure partition on top of Hafnium.
The partition is not meant to access the GIC directly but use the
Hafnium provided interfaces.

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I1a38101f6ae9911662828734a3c9572642123f32

show more ...

fix(xilinx): fix coding style violations

Fix coding style violations and alignments:
- Remove additional newlines in headers
- Remove additional newlines in code
- Add newline to separate variable f

fix(xilinx): fix coding style violations

Fix coding style violations and alignments:
- Remove additional newlines in headers
- Remove additional newlines in code
- Add newline to separate variable from the code
- Use the same indentation in platform.mk
- Align function parameters
- Use tabs for indentation in kernel-doc format

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I0b12804ff63bc19778e8f21041f9accba5b488b9

show more ...

build(intel): enable access to on-chip ram in BL31 for N5X

This adds the ncore ccu access and enable access to the
on-chip ram for N5X device in BL31.

Signed-off-by: Boon Khai Ng <boon.khai.ng@inte

build(intel): enable access to on-chip ram in BL31 for N5X

This adds the ncore ccu access and enable access to the
on-chip ram for N5X device in BL31.

Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I713f6e93d33b6e91705547477ca32cfba5c8c13d

show more ...

fix(intel): make FPGA memory configurations platform specific

Define FPGA_CONFIG_SIZE and FPGA_CONFIG_ADDR in
platform-specific header. This is due to different
allocated sizes between platforms.

S

fix(intel): make FPGA memory configurations platform specific

Define FPGA_CONFIG_SIZE and FPGA_CONFIG_ADDR in
platform-specific header. This is due to different
allocated sizes between platforms.

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iac4fbf4d4940cdf31834a9d4332f9292870dee76

show more ...

fix(intel): fix ECC Double Bit Error handling

SError and Abort are handled in Linux (EL1) instead of
EL3. This patch adds some functionality that complements the
use cases by Linux as follows:

- Pr

fix(intel): fix ECC Double Bit Error handling

SError and Abort are handled in Linux (EL1) instead of
EL3. This patch adds some functionality that complements the
use cases by Linux as follows:

- Provide SMC for ECC DBE notification to EL3
- Determine type of reset needed and service the request in
place of Linux

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I43d02c77f28004a31770be53599a5a42de412211

show more ...

build(intel): define a macro for SIMICS build

SIMICS builds have different UART configurations compared
to hardware build. Hence, this patch defines a macro to
differentiate between both.

Signed-of

build(intel): define a macro for SIMICS build

SIMICS builds have different UART configurations compared
to hardware build. Hence, this patch defines a macro to
differentiate between both.

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iadecd5445e06611486ac3c6a214a6d0dc8ccd27b

show more ...

build(intel): add N5X as a new Intel platform

This commit adds a new Intel platform called N5X.
This preliminary patch only have Bl31 support.

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muh

build(intel): add N5X as a new Intel platform

This commit adds a new Intel platform called N5X.
This preliminary patch only have Bl31 support.

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ib31f9c4a5a0dabdce81c1d5b0d4776188add7195

show more ...

build(intel): initial commit for crypto driver

This patch adds driver for Intel FPGA's Crypto Services.
These services are provided by Intel platform
Secure Device Manager(SDM) and are made accessib

build(intel): initial commit for crypto driver

This patch adds driver for Intel FPGA's Crypto Services.
These services are provided by Intel platform
Secure Device Manager(SDM) and are made accessible by
processor components (ie ATF).
Below is the list of enabled features:
- Send SDM certificates
- Efuse provision data dump
- Encryption/decryption service
- Hardware IP random number generator

Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: If7604cd1cacf27a38a9a29ec6b85b07385e1ea26

show more ...

Merge changes I18d47384,Icc3c7424,I73f20d82,I07325644,Iff10ad26, ... into integration

* changes:
fix(zynqmp): query node status to power up APU
feat(zynqmp): pm_api_clock_get_num_clocks cleanup

Merge changes I18d47384,Icc3c7424,I73f20d82,I07325644,Iff10ad26, ... into integration

* changes:
fix(zynqmp): query node status to power up APU
feat(zynqmp): pm_api_clock_get_num_clocks cleanup
feat(zynqmp): add feature check support
fix(zynqmp): use common interface for eemi apis
feat(zynqmp): add support to get info of xilfpga
feat(zynqmp): pass ioctl calls to firmware

show more ...

Merge "fix(versal): fix the incorrect log message" into integration

fix(versal): fix the incorrect log message

When the atf-handoff-params are updated we are returning
FSBL_HANDOFF_SUCCESS, but the return condition is wrongly
updated and added a error log which is i

fix(versal): fix the incorrect log message

When the atf-handoff-params are updated we are returning
FSBL_HANDOFF_SUCCESS, but the return condition is wrongly
updated and added a error log which is incorrect.
Fixing the incorrect log message.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I44ebbb861831b86afcb87f09ddb2e23614393c28

show more ...

refactor(st): configure UART baudrate

Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 11520

refactor(st): configure UART baudrate

Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I000df70c10b2b4dac1449556596f9820c36cf243

show more ...

Merge "feat(mt8186): disable 26MHz clock while suspending" into integration

fix(zynqmp): query node status to power up APU

If APU is in suspending state and if wakeup request comes then
PMUFW returns error which is not handled at ATF side.

To fix this, get the APU node sta

fix(zynqmp): query node status to power up APU

If APU is in suspending state and if wakeup request comes then
PMUFW returns error which is not handled at ATF side.

To fix this, get the APU node status before calling wakeup and
return error if found in suspending state.

Here, we can not handle the error code of pm_req_wakeup() from PMUFW
because ATF is already calling pm_client_wakeup() before calling
pm_req_wakeup().

Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I18d47384e46e22ae49e804093ad0641b7a6349e2

show more ...

feat(zynqmp): pm_api_clock_get_num_clocks cleanup

There is no reason to have even one additional useless line that's why
remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-

feat(zynqmp): pm_api_clock_get_num_clocks cleanup

There is no reason to have even one additional useless line that's why
remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Icc3c74249dfe64173aa5c88fb0f9ffe7576fc2aa

show more ...

feat(zynqmp): add feature check support

This API returns version of supported APIs.

Here, there are three cases to check API version by using feature
check implementation.

1. Completely implemente

feat(zynqmp): add feature check support

This API returns version of supported APIs.

Here, there are three cases to check API version by using feature
check implementation.

1. Completely implemented in TF-A: I mean the EEMI APIs which are
completely implemented in the TF-A only. So check those IDs and
return appropriate version for the same. Right now, it is base
version.

2. Completely implemented in firmware: I mean the EEMI APIs which are
completely implemented in the firmware only. Here, TF-A only passes
Linux request to the firmware to get the version of supported API. So
check those IDs and send request to firmware to get the version and
return to Linux if the version is supported or return the error code
if the feature is not supported.

3. Partially implemented (Implemented in TF-A and firmware both):
First check dependent EEMI API version with the expected version in
the TF-A. If the dependent EEMI API is supported in firmware then
return its version and check with the expected version in the TF-A.
If the version matches then check for the actual requested EEMI API
version. If the version is supported then return version of API
implemented in TF-A.

Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I73f20d8222c518df1cda7879548b408b130b5b2e

show more ...

fix(zynqmp): use common interface for eemi apis

Currently all EEMI API has its own implementation in TF-A which is
redundant. Most EEMI API implementation in TF-A does same work. It
prepares payload

fix(zynqmp): use common interface for eemi apis

Currently all EEMI API has its own implementation in TF-A which is
redundant. Most EEMI API implementation in TF-A does same work. It
prepares payload received from kernel, sends payload to firmware,
receives response from firmware and send response back to kernel.

So use common interface for EEMI APIs which has similar functionality.
This will optimize TF-A code.

Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I07325644a1fae80211f2588d5807c21973f6d48f

show more ...

feat(zynqmp): add support to get info of xilfpga

Adds support to get the xilfpga library version and feature list info.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Rona

feat(zynqmp): add support to get info of xilfpga

Adds support to get the xilfpga library version and feature list info.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Iff10ad2628a6a90230c18dc3aebf9dde89f53ecd

show more ...

feat(zynqmp): pass ioctl calls to firmware

Firmware supports new IOCTL for different purposes. To avoid
maintaining new IOCTL IDs in ATF, pass IOCTL call to firmware
for IOCTL IDs implemented in fir

feat(zynqmp): pass ioctl calls to firmware

Firmware supports new IOCTL for different purposes. To avoid
maintaining new IOCTL IDs in ATF, pass IOCTL call to firmware
for IOCTL IDs implemented in firmware.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Ie14697c8da9581b0f695f4d33f05161ece558385

show more ...

Merge "feat(zynqmp): increase the max xlat tables when debug build is enabled" into integration