plat: imx8mq: gpc: Enable all power domain by default

This is similar to imx8mm and allows uboot to run fastboot over USB otg.

There is a different set of power domains on 8mq but same bits covers

plat: imx8mq: gpc: Enable all power domain by default

This is similar to imx8mm and allows uboot to run fastboot over USB otg.

There is a different set of power domains on 8mq but same bits covers
all off them.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Change-Id: I1151c2bc2d32b1e02b4db16285b3d30cabc0d64d

show more ...

Mbed TLS: Remove weak heap implementation

The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.

The shared Mbed TLS heap def

Mbed TLS: Remove weak heap implementation

The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.

The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.

Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

show more ...

plat: imx8m: remove deprecated code include

The 'drivers/console/aarch64/console.S' is not needed,
so remove it from build to fix the build error when
'ERROR_DEPRECATED'set.

Change-Id: Id047a355f82

plat: imx8m: remove deprecated code include

The 'drivers/console/aarch64/console.S' is not needed,
so remove it from build to fix the build error when
'ERROR_DEPRECATED'set.

Change-Id: Id047a355f82fd33298b7e2b49eff289d28eb5b56
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

show more ...

Makefile: remove extra include paths in INCLUDES

Now it is needed to use the full path of the common header files.

Commit 09d40e0e0828 ("Sanitise includes across codebase") provides more
informatio

Makefile: remove extra include paths in INCLUDES

Now it is needed to use the full path of the common header files.

Commit 09d40e0e0828 ("Sanitise includes across codebase") provides more
information.

Change-Id: Ifedc79d9f664d208ba565f5736612a3edd94c647
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

show more ...

Console: remove deprecated finish_console_register

The old version of the macro is deprecated.

Commit cc5859ca19ff ("Multi-console: Deprecate the
`finish_console_register` macro") provides more det

Console: remove deprecated finish_console_register

The old version of the macro is deprecated.

Commit cc5859ca19ff ("Multi-console: Deprecate the
`finish_console_register` macro") provides more details.

Change-Id: I3d1cdf6496db7d8e6cfbb5804f508ff46ae7e67e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

show more ...

plat: imx8m: Add the basic support for imx8mm

The i.MX8M Mini is new SOC of the i.MX8M family. it is
focused on delivering the latest and greatest video and
audio experience combining state-of-the-a

plat: imx8m: Add the basic support for imx8mm

The i.MX8M Mini is new SOC of the i.MX8M family. it is
focused on delivering the latest and greatest video and
audio experience combining state-of-the-art media-specific
features with high-performance processing while optimized
for lowest power consumption. The i.MX 8M Mini Media Applications
Processor is 14nm FinFET product of the growing i.MX8M family
targeting the consumer & industrial market. It is built in 14LPP
to achieve both high performance and low power consumption
and relies on a powerful fully coherent core complex based on
a quad Cortex-A53 cluster with video and graphics accelerators

this patch add the basic support for i.MX8MM.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>

show more ...

plat: imx8m: refactor the code to make it reusable

for the i.MX8M SOCs, part of the code for gpc
and PSCI implementation can be reused and make it
common for all these SoCs. this patch extracts
the

plat: imx8m: refactor the code to make it reusable

for the i.MX8M SOCs, part of the code for gpc
and PSCI implementation can be reused and make it
common for all these SoCs. this patch extracts
the common part for reuse.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>

show more ...

Merge pull request #1837 from spencercw/master

imx: Configure CAAM job rings master ID for i.MX8MQ

imx: make sure GIC redistributor is awake before initialization

GICR_WAKER.ProcessorSleep can only be set to zero when:
— GICR_WAKER.Sleep bit[0] == 0.
— GICR_WAKER.Quiescent bit[31] == 0.

On some

imx: make sure GIC redistributor is awake before initialization

GICR_WAKER.ProcessorSleep can only be set to zero when:
— GICR_WAKER.Sleep bit[0] == 0.
— GICR_WAKER.Quiescent bit[31] == 0.

On some platforms, when system reboot with GIC in sleep
mode but with power ON, such as on NXP's i.MX8QM, Linux
kernel enters suspend but could be requested to reboot,
and GIC is in sleep mode and it is inside a power domain
which is ON in this scenario, when CPU reset, the GIC
driver trys to set CORE's redistributor interface to awake,
with GICR_WAKER.Sleep bit[0] and GICR_WAKER.Quiescent bit[31]
both set, the ProcessorSleep bit[1] will never be clear
and cause system hang.

This patch makes sure GICR_WAKER.Sleep bit[0] and
GICR_WAKER.Quiescent bit[31] are both zeor before clearing
ProcessorSleep bit[1].

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: Configure CAAM job rings master ID for i.MX8MQ

For i.MX8MQ B0 revision the default configuration of JRaMID is not valid
to allow the kernel to use the CAAM job rings. This patch sets the
master

imx: Configure CAAM job rings master ID for i.MX8MQ

For i.MX8MQ B0 revision the default configuration of JRaMID is not valid
to allow the kernel to use the CAAM job rings. This patch sets the
master ID of the Cortex A in the JRaMID registers.

Signed-off-by: Chris Spencer <christopher.spencer@sea.co.uk>

show more ...

imx: warp7: Migrate to MULTI_CONSOLE_API

This commit migrates to MULTI_CONSOLE_API for IMX Warp7 board.
We also rename the functions in imx_uart driver to more specific one.

Signed-off-by: Ying-Chu

imx: warp7: Migrate to MULTI_CONSOLE_API

This commit migrates to MULTI_CONSOLE_API for IMX Warp7 board.
We also rename the functions in imx_uart driver to more specific one.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

show more ...

Remove unneeded include paths in PLAT_INCLUDES

Also, update platform_def.h guidelines about includes in the porting
guide.

Change-Id: I1ae338c9dd3242b309f6d53687ba2cb755d488c3
Signed-off-by: Antoni

Remove unneeded include paths in PLAT_INCLUDES

Also, update platform_def.h guidelines about includes in the porting
guide.

Change-Id: I1ae338c9dd3242b309f6d53687ba2cb755d488c3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

imx: power optimization for i.mx8qx

Current implementation of i.MX8QX power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kep

imx: power optimization for i.mx8qx

Current implementation of i.MX8QX power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kept in STBY mode (powered
ON) when system suspend or CPU hotplug.

To lower the power number, OFF mode should be adopted for those
system resources whenever they can be OFF, A cluster will be OFF
if the CPUs in the cluster are all off line, DDR/MU/DB can be OFF
if system suspend, IRQ steer can be OFF if the wakeup source is
belonged to system controller partition, so wakeup source runtime
check is used to determine if IRQ steer can be OFF before system
suspend.

If resources are powered off for suspend, they should be restored
properly after system resume.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: power optimization for i.mx8qm

Current implementation of i.MX8QM power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kep

imx: power optimization for i.mx8qm

Current implementation of i.MX8QM power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kept in STBY mode (powered
ON) when system suspend or CPU hotplug.

To lower the power number, OFF mode should be adopted for those
system resources whenever they can be OFF, A cluster will be OFF
if the CPUs in the cluster are all off line, DDR/MU/DB can be OFF
if system suspend, IRQ steer can be OFF if the wakeup source is
belonged to system controller partition, so wakeup source runtime
check is used to determine if IRQ steer can be OFF before system
suspend.

If resources are powered off for suspend, they should be restored
properly after system resume.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

Merge pull request #1766 from Anson-Huang/master

Add more SIP runtime service for i.MX8

imx: enable necessary errata for i.mx8qm

NXP's i.MX8QM uses Cortex-A53 r0p4, enable necessary
erratas for it.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

imx: enable necessary errata for i.mx8mq

NXP's i.MX8MQ uses Cortex-A53 r0p4, enable necessary
erratas for it.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

warp7: Enable Trusted Board Boot for WaRP7

This patch enables Trusted Board Boot for warp7. A subsequent patch
contains build/run instructions.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@lina

warp7: Enable Trusted Board Boot for WaRP7

This patch enables Trusted Board Boot for warp7. A subsequent patch
contains build/run instructions.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>

show more ...

warp7: Define DTB overlay address in memory map

This patch defines the expected DTB overlay address in the memory map for
this platform. Its important that all points in the boot process agree on
th

warp7: Define DTB overlay address in memory map

This patch defines the expected DTB overlay address in the memory map for
this platform. Its important that all points in the boot process agree on
this memory map even if not all elements utilize it.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

show more ...

warp7: io_storage: Remove DTB from FIP

Recently upstreamed changes to OP-TEE mean that it is possible for OP-TEE
to provide a DTB overlay directly to subsequent boot stages thus negating
the require

warp7: io_storage: Remove DTB from FIP

Recently upstreamed changes to OP-TEE mean that it is possible for OP-TEE
to provide a DTB overlay directly to subsequent boot stages thus negating
the requirement to bundle a DTB in the FIP.

This patch switches off the dependency on the DTB in the FIP descriptor
instead we will provide the necessary data as an overlay from OP-TEE.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

show more ...

imx: add i.MX8 SoCs build info SIP(silicon provider) service support

This patch adds NXP i.MX8 SoCs' build info SIP support for easy debug.
With this function enabled, TF-A's commit hash can be show

imx: add i.MX8 SoCs build info SIP(silicon provider) service support

This patch adds NXP i.MX8 SoCs' build info SIP support for easy debug.
With this function enabled, TF-A's commit hash can be showed in u-boot
debug console when booting up, when there is any issue which could be
related to TF-A, users can use the commit hash value to easily identify
which commit introduces the issue.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: add i.MX8 SoCs thermal alarm SIP(silicon provider) service support

For NXP's i.MX8 SoCs with system controller inside, thermal sensors
are maintained by SCFW, Linux needs to call SMC to trap to

imx: add i.MX8 SoCs thermal alarm SIP(silicon provider) service support

For NXP's i.MX8 SoCs with system controller inside, thermal sensors
are maintained by SCFW, Linux needs to call SMC to trap to TF-A for
thermal alarm operation etc. by calling SCFW API.

This patch adds temperature alarm SIP service support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: add i.MX8 SoCs OTP SIP(silicon provider) service support

For NXP's i.MX8 SoCs with system controller inside, OTP is
maintained by SCFW, Linux needs to call SMC to trap to TF-A
for OTP read/writ

imx: add i.MX8 SoCs OTP SIP(silicon provider) service support

For NXP's i.MX8 SoCs with system controller inside, OTP is
maintained by SCFW, Linux needs to call SMC to trap to TF-A
for OTP read/write etc. operations by calling SCFW API.

This patch adds OTP SIP service support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: support for i.MX8 SoCs misc IPC

NXP's i.MX8 SoCs have system controller (M4 core) which takes
control of misc functions like temperature alarm, dma etc., other
Cortex-A clusters can send out co

imx: support for i.MX8 SoCs misc IPC

NXP's i.MX8 SoCs have system controller (M4 core) which takes
control of misc functions like temperature alarm, dma etc., other
Cortex-A clusters can send out command via MU (Message Unit) to
system controller for misc operation etc..

This patch adds misc IPC(inter-processor communication) support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: add wakeup source SIP runtime service support

On i.MX8QM/i.MX8QX with system controller inside, the wakeup
source is managed in SCFW(system controller firmware), if the
wakeup source is belonge

imx: add wakeup source SIP runtime service support

On i.MX8QM/i.MX8QX with system controller inside, the wakeup
source is managed in SCFW(system controller firmware), if the
wakeup source is belonged to system controller partition, then
before Linux suspend, the wakeup source should be set to
SC_PM_WAKE_SRC_SCU, and if the wakeup source is belonged to
Cortex-A partition, the wakeup source should be set to
SC_PM_WAKE_SRC_IRQSTEER, so need to add wakeup source SIP runtime
service to get Linux kernel's wakeup source and set the correct
wakeup source for system controller.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...