Merge changes from topic "RDV3-hafnium-support" into integration

* changes:
feat(rdv3): enable the support to fetch dynamic config
feat(rdv3): add dts files to enable hafnium as BL32
feat(rdv3

Merge changes from topic "RDV3-hafnium-support" into integration

* changes:
feat(rdv3): enable the support to fetch dynamic config
feat(rdv3): add dts files to enable hafnium as BL32
feat(rdv3): define SPMC manifest base address
feat(arm): add a macro for SPMC manifest base address
feat(rdv3): add carveout for BL32 image
feat(rdv3): introduce platform handler for Group0 interrupt
feat(neoverse-rd): use larger stack size when S-EL2 spmc is enabled
fix(neoverse-rd): set correct SVE vector lengths

show more ...

feat(rdv3): add carveout for BL32 image

Add and map the carveout for loading Hafnium as BL32 image. Also define
PLAT_ARM_SP_MAX_SIZE as 3 MB for secure partitions.

Signed-off-by: Rohit Mathew <rohi

feat(rdv3): add carveout for BL32 image

Add and map the carveout for loading Hafnium as BL32 image. Also define
PLAT_ARM_SP_MAX_SIZE as 3 MB for secure partitions.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Signed-off-by: Nishant Sharma <nishant.sharma@arm.com>
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: I2845eb6807a127c9f6b92de2dabc9a58d25bd4d4

show more ...

Merge changes from topic "rd-v3-reset-to-bl31" into integration

* changes:
feat(neoverse-rd): allow RESET_TO_BL31 for third gen platforms
feat(arm): setup GPT in BL31 in RESET_TO_BL31 boot flow

Merge changes from topic "rd-v3-reset-to-bl31" into integration

* changes:
feat(neoverse-rd): allow RESET_TO_BL31 for third gen platforms
feat(arm): setup GPT in BL31 in RESET_TO_BL31 boot flow
feat(neoverse-rd): enable RESET_TO_BL31 for RD-V3
feat(neoverse-rd): add a routine to update NT_FW_CONFIG in BL31

show more ...

feat(neoverse-rd): add a routine to update NT_FW_CONFIG in BL31

In the BL1 based boot-flow, the non-secure DTB, NT_FW_CONFIG, is parsed
in BL2. As BL1 and BL2 are not part of RESET_TO_BL31, add supp

feat(neoverse-rd): add a routine to update NT_FW_CONFIG in BL31

In the BL1 based boot-flow, the non-secure DTB, NT_FW_CONFIG, is parsed
in BL2. As BL1 and BL2 are not part of RESET_TO_BL31, add support to
parse and configure this DTB in BL31. NT_FW_CONFIG contains the platform
information which is needed by BL33.

Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: Ib1fb5417c36523eb2ec02aa22845218de68809aa

show more ...

Merge changes from topic "nrd3_support" into integration

* changes:
feat(rdfremont): add support for measured boot at BL1 and BL2
feat(arm): mock support for CCA NV ctr
feat(rdfremont): fetch

Merge changes from topic "nrd3_support" into integration

* changes:
feat(rdfremont): add support for measured boot at BL1 and BL2
feat(arm): mock support for CCA NV ctr
feat(rdfremont): fetch attestation key and token from RSE
feat(psa): introduce generic library for CCA attestation
feat(rdfremont): initialize the rse comms driver
feat(rdfremont): helper to initialize rse-comms with AP-RSE MHUv3
fix(rse): include lib-psa to resolve build
feat(neoverse-rd): add MHUv3 channels on third gen multichip platforms
feat(neoverse-rd): add MHUv3 doorbell channels on third gen platforms
feat(rdfremont): initialize GPT on GPC SMMU block
feat(rdfremont): update Root registers page offset for SMMUv3
feat(rdfremont): enable MTE2 if present on the platform
feat(rdfremont): enable SVE for SWD and NS
feat(rdfremont): enable AMU if present on the platform
feat(rdfremont): enable MPAM if present on the platform
feat(rdfremont): add DRAM pas entries in pas table for multichip
feat(rdfremont): add implementation for GPT setup
feat(rdfremont): integrate DTS files for RD-Fremont variants
feat(rdfremont): add support for RD-Fremont-Cfg2
feat(rdfremont): add support for RD-Fremont-Cfg1
feat(rdfremont): add support for RD-Fremont
feat(neoverse-rd): add scope for RD-Fremont variants
feat(neoverse-rd): add multichip pas entries
feat(neoverse-rd): add pas definitions for third gen platforms
feat(neoverse-rd): add DRAM layout for third gen platforms
feat(neoverse-rd): add SRAM layout for third gen platforms
feat(neoverse-rd): add firmware definitions for third gen platforms
feat(neoverse-rd): add RoS definitions for third gen platforms
feat(neoverse-rd): add CSS definitions for third gen platforms

show more ...

feat(rdfremont): initialize GPT on GPC SMMU block

GPC SMMU does granule protection checks (GPC) for accesses originating
from the system control block and GIC on RD-Fremont platforms. The GPC
check

feat(rdfremont): initialize GPT on GPC SMMU block

GPC SMMU does granule protection checks (GPC) for accesses originating
from the system control block and GIC on RD-Fremont platforms. The GPC
check on this is disabled by the boot firmware. Configure the GPC SMMU
to enable GPC.

The transactions on GPC SMMU should be allowed during boot stages so
don't perform smmuv3_security_init() for this SMMU instance.

Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: I3400c57fe264582a45c6a26f9dae8c669e8a8047

show more ...

feat(rdfremont): add implementation for GPT setup

Since GPT setup has been delegated to the platform, add an
implementation for plat_bl2_gpt_setup in accordance with the
specification for RD-Fremont

feat(rdfremont): add implementation for GPT setup

Since GPT setup has been delegated to the platform, add an
implementation for plat_bl2_gpt_setup in accordance with the
specification for RD-Fremont variants.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I1ff47249ce304f1c188850282d92c64cae463383

show more ...

feat(neoverse-rd): add DRAM layout for third gen platforms

Given the differences in memory map of the third generation reference
design platforms, it is necessary to move away from the common DRAM
l

feat(neoverse-rd): add DRAM layout for third gen platforms

Given the differences in memory map of the third generation reference
design platforms, it is necessary to move away from the common DRAM
layout present as part of arm_def.h. Therefore, introduce definitions
and necessary carveouts within DRAM to define a new DRAM layout for
these platforms.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I79af066f41259f147febdc3c00447db5be995799

show more ...

feat(neoverse-rd): add SRAM layout for third gen platforms

Given the differences in memory map and additional RME requirements for
the V3 CPU based platforms, it is necessary to move away from the c

feat(neoverse-rd): add SRAM layout for third gen platforms

Given the differences in memory map and additional RME requirements for
the V3 CPU based platforms, it is necessary to move away from the common
SRAM layout present as part of arm_def.h. Therefore, introduce
definitions and necessary carveouts within SRAM to define a new SRAM
layout for these platforms.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I2d0ef65abde66da7523dd9e09036c7803978570c

show more ...

feat(neoverse-rd): add firmware definitions for third gen platforms

Add firmware definitions for the third generation of platforms. The
following files are added -

- nrd_css_fw_def3.h: for CSS firm

feat(neoverse-rd): add firmware definitions for third gen platforms

Add firmware definitions for the third generation of platforms. The
following files are added -

- nrd_css_fw_def3.h: for CSS firmware definitions
- nrd_ros_fw_def3.h : for RoS firmware definitions
- nrd_plat_arm_def3.h: for platform port macros

All the common files for these platforms are housed under nrd3
directory.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I085d609cfe1686d28d1c467fb34d45af47e00eb6

show more ...