feat(ethos-n): add separate RO and RW NSAIDs

To be able to further restrict the memory access for the Arm(R)
Ethos(TM)-N NPU, separate read-only and read/write NSAIDs for the
non-protected and prote

feat(ethos-n): add separate RO and RW NSAIDs

To be able to further restrict the memory access for the Arm(R)
Ethos(TM)-N NPU, separate read-only and read/write NSAIDs for the
non-protected and protected memory have been added to the Juno
platform's TZMP1 TZC configuration for the NPU.

The platform definition has been updated accordingly and the NPU driver
will now only give read/write access to the streams that require it.

Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I5a173500fc1943a5cd406a3b379e1f1f554eeda6

show more ...

feat(ethos-n)!: load NPU firmware at BL2

BL2 on Juno now loads the Arm(R) Ethos(TM)-N NPU firmware into a fixed
address, using the existing image loading framework.

Includes support for TRUSTED_BOA

feat(ethos-n)!: load NPU firmware at BL2

BL2 on Juno now loads the Arm(R) Ethos(TM)-N NPU firmware into a fixed
address, using the existing image loading framework.

Includes support for TRUSTED_BOARD_BOOT, if enabled, using the firmware
content and key certificates from the FIP.

Supports the ARM_IO_IN_DTB option so can specify the firmware location
from the dtb rather than it being hardcoded to the FIP

Update makefile to automatically embed the appropriate images into the
FIP.

BREAKING CHANGE: Building the FIP when TZMP1 support is enabled in the
NPU driver now requires a parameter to specify the NPU firmware file.

Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I8cd64fb20d58f8bd539facb085606213d6cead06

show more ...

feat(ethos-n): add support to set up NSAID

For the TZC to allow the Arm(R) Ethos(TM)-N NPU to access the buffers
allocated in a protected memory region, it must include the correct
NSAID for that re

feat(ethos-n): add support to set up NSAID

For the TZC to allow the Arm(R) Ethos(TM)-N NPU to access the buffers
allocated in a protected memory region, it must include the correct
NSAID for that region in its transactions to the memory. This change
updates the SiP service to configure the NSAIDs specified by a platform
define. When doing a protected access the SiP service now configures the
NSAIDs specified by the platform define. For unprotected access the
NSAID is set to zero.

Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I3360ef33705162aba5c67670386922420869e331

show more ...

build(ethos-n): add TZMP1 build flag

For the Arm(R) Ethos(TM)-N NPU Driver to support running inference with
protected memory the TZC must be configured with appropriate regions.

This is controlled

build(ethos-n): add TZMP1 build flag

For the Arm(R) Ethos(TM)-N NPU Driver to support running inference with
protected memory the TZC must be configured with appropriate regions.

This is controlled in build time by the now added build flag.

The new build flag is only supported with the Arm Juno platform and the
TZC is configured with default memory regions as if TZMP1 wasn't
enabled to facilitate adding the new memory regions later.

Signed-off-by: Bjorn Engstrom <bjoern.engstroem@arm.com>
Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I9dc49ac5d091cfbc8c20d7c3ab394a2836438b0f

show more ...

docs(sve): update defaults for FEAT_SVE

FEAT_SVE build macro, "ENABLE_SVE_FOR_NS" default value has been updated
to 2, to support its existing behavior of dynamic detection as well as
keep it aligne

docs(sve): update defaults for FEAT_SVE

FEAT_SVE build macro, "ENABLE_SVE_FOR_NS" default value has been updated
to 2, to support its existing behavior of dynamic detection as well as
keep it aligned with the changes concerning STATE=FEAT_STATE_CHECKED(2),
part of Feature Detection procedure.

Change-Id: Iee43e899f19dc9d5eb57c235998758f462a8c397
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

feat(cpufeat): enable FEAT_SVE for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SVE_FOR_NS=2), by splitting
sve_supported() into an ID register reading function and a
second function

feat(cpufeat): enable FEAT_SVE for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SVE_FOR_NS=2), by splitting
sve_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SVE specific setup.

Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.

Change-Id: I1caaba2216e8e2a651452254944a003607503216
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

feat(cpufeat): enable FEAT_SME for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SME_FOR_NS=2), by splitting
feat_sme_supported() into an ID register reading function and a
second fun

feat(cpufeat): enable FEAT_SME for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SME_FOR_NS=2), by splitting
feat_sme_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SME specific setup.

Change the FVP platform default to the now supported dynamic option
(=2),so the right decision can be made by the code at runtime.

Change-Id: Ida9ccf737db5be20865b84f42b1f9587be0626ab
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

Merge changes from topic "psci-osi" into integration

* changes:
feat(sc7280): add support for PSCI_OS_INIT_MODE
feat(fvp): enable support for PSCI OS-initiated mode
feat(psci): update PSCI_FEA

Merge changes from topic "psci-osi" into integration

* changes:
feat(sc7280): add support for PSCI_OS_INIT_MODE
feat(fvp): enable support for PSCI OS-initiated mode
feat(psci): update PSCI_FEATURES
feat(psci): add support for OS-initiated mode
feat(psci): add support for PSCI_SET_SUSPEND_MODE
build(psci): add build option for OS-initiated mode
docs(psci): add design proposal for OS-initiated mode

show more ...

refactor(amu): unify ENABLE_AMU and ENABLE_FEAT_AMUv1

So far we have the ENABLE_AMU build option to include AMU register
handling code for enabling and context switch. There is also an
ENABLE_FEAT_A

refactor(amu): unify ENABLE_AMU and ENABLE_FEAT_AMUv1

So far we have the ENABLE_AMU build option to include AMU register
handling code for enabling and context switch. There is also an
ENABLE_FEAT_AMUv1 option, solely to protect the HAFGRTR_EL2 system
register handling. The latter needs some alignment with the new feature
scheme, but it conceptually overlaps with the ENABLE_AMU option.

Since there is no real need for two separate options, unify both into a
new ENABLE_FEAT_AMU name in a first step. This is mostly just renaming at
this point, a subsequent patch will make use of the new feature handling
scheme.

Change-Id: I97d8a55bdee2ed1e1509fa9f2b09fd0bdd82736e
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge changes from topic "feat_state_part4" into integration

* changes:
refactor(cpufeat): enable FEAT_RNG for FEAT_STATE_CHECKED
refactor(cpufeat): align FEAT_SEL2 to new feature handling
ref

Merge changes from topic "feat_state_part4" into integration

* changes:
refactor(cpufeat): enable FEAT_RNG for FEAT_STATE_CHECKED
refactor(cpufeat): align FEAT_SEL2 to new feature handling
refactor(cpufeat): enable FEAT_NV2 for FEAT_STATE_CHECKED
refactor(cpufeat): enable FEAT_TWED for FEAT_STATE_CHECKED
refactor(cpufeat): enable FEAT_CSV2_2 for FEAT_STATE_CHECKED
refactor(cpufeat): enable FEAT_ECV for FEAT_STATE_CHECKED
refactor(cpufeat): enable FEAT_PAN for FEAT_STATE_CHECKED
refactor(cpufeat): align FEAT_SB to new feature handling
refactor(cpufeat): use alternative encoding for "SB" barrier
refactor(cpufeat): enable SYS_REG_TRACE for FEAT_STATE_CHECKED
fix(cpufeat): make stub enable functions "static inline"
fix(mpam): feat_detect: support major/minor

show more ...

docs(maintainers): add new maintainers for MediaTek SoCs

Change-Id: Ie6afadf16921d084137b0e0b5f2a76ae504a6bc7
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>

refactor(cpufeat): align FEAT_SB to new feature handling

FEAT_SB introduces a new speculation barrier instruction, that is more
lightweight than a "dsb; isb" combination. We use that in a hot path,

refactor(cpufeat): align FEAT_SB to new feature handling

FEAT_SB introduces a new speculation barrier instruction, that is more
lightweight than a "dsb; isb" combination. We use that in a hot path,
so cannot afford and don't want a runtime detection mechanism.
Nevertheless align the implementation of the feature detection part
with the other features, but renaming the detection function, and
updating the FEAT_DETECTION code. Also update the documentation.

Change-Id: I2b86dfd1ad259c3bb99ab5186e2911ace454b54c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

refactor(cpufeat): enable SYS_REG_TRACE for FEAT_STATE_CHECKED

At the moment we only support access to the trace unit by system
registers (SYS_REG_TRACE) to be either unconditionally compiled in, or

refactor(cpufeat): enable SYS_REG_TRACE for FEAT_STATE_CHECKED

At the moment we only support access to the trace unit by system
registers (SYS_REG_TRACE) to be either unconditionally compiled in, or
to be not supported at all.

Add support for runtime detection (ENABLE_SYS_REG_TRACE_FOR_NS=2), by
adding is_feat_sys_reg_trace_supported(). That function considers both
build time settings and runtime information (if needed), and is used
before we access SYS_REG_TRACE related registers.

The FVP platform decided to compile in support unconditionally (=1),
even though this is an optional feature, so it is not available with the
FVP model's default command line.
Change that to the now supported dynamic option (=2), so the right
decision can be made by the code at runtime.

Change-Id: I450a574a4f6bd9fc269887037049c94c906f54b2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

fix(cpus): workaround for Cortex-A78C erratum 1827440

Cortex-A78C erratum 1827440 is a Cat B erratum that applies to
revision r0p0 and is fixed in r0p1.

The workaround is to set CPUACTLR2_EL1[2], w

fix(cpus): workaround for Cortex-A78C erratum 1827440

Cortex-A78C erratum 1827440 is a Cat B erratum that applies to
revision r0p0 and is fixed in r0p1.

The workaround is to set CPUACTLR2_EL1[2], which forces atomic store
operations to write-back memory to be performed in the L1 data cache.

SDEN documentation:
https://developer.arm.com/documentation/SDEN1707916/latest

Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I41d8ef48f70216ec66bf2b0f4f03ea8d8c261ee7

show more ...

fix(cpus): workaround for Cortex-A78C erratum 1827430

Cortex-A78C erratum 1827430 is a Cat B erratum that applies to
revision r0p0 and is fixed in r0p1.

The workaround is to set the CPUECTLR_EL1[53

fix(cpus): workaround for Cortex-A78C erratum 1827430

Cortex-A78C erratum 1827430 is a Cat B erratum that applies to
revision r0p0 and is fixed in r0p1.

The workaround is to set the CPUECTLR_EL1[53] to 1, which disables
allocation of splintered pages in the L2 TLB.

SDEN documentation:
https://developer.arm.com/documentation/SDEN1707916/latest

Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ie68771bdd3bddeff54d06b6a456dad4a7fc27426

show more ...

feat(docs): allow verbose build

If V=1 is set (or directly Q="") in the 'make doc' command line, the
sphinx command that builds the documentation is displayed.

Signed-off-by: Yann Gautier <yann.gau

feat(docs): allow verbose build

If V=1 is set (or directly Q="") in the 'make doc' command line, the
sphinx command that builds the documentation is displayed.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4961c124cc52d0183371f1d4bbc0e440f5ae6e63

show more ...

feat(psci): add support for OS-initiated mode

This patch adds a `psci_validate_state_coordination` function that is
called by `psci_cpu_suspend_start` in OS-initiated mode.

This function validates

feat(psci): add support for OS-initiated mode

This patch adds a `psci_validate_state_coordination` function that is
called by `psci_cpu_suspend_start` in OS-initiated mode.

This function validates the request per sections 4.2.3.2, 5.4.5, and 6.3
of the PSCI spec (DEN0022D.b):
- The requested power states are consistent with the system's state
- The calling core is the last running core at the requested power level

This function differs from `psci_do_state_coordination` in that:
- The `psci_req_local_pwr_states` map is not modified if the request
were to be denied
- The `state_info` argument is never modified since it contains the
power states requested by the calling OS

This is conditionally compiled into the build depending on the value of
the `PSCI_OS_INIT_MODE` build option.

Change-Id: I667041c842d2856e9d128c98db4d5ae4e4552df3
Signed-off-by: Wing Li <wingers@google.com>

show more ...

build(psci): add build option for OS-initiated mode

Change-Id: Ie4f7b6a36926ab075ebb9c6507a3ff48ce5538fe
Signed-off-by: Wing Li <wingers@google.com>

docs(psci): add design proposal for OS-initiated mode

Change-Id: Ia3662e08d98d01a93951309835816969e1602624
Signed-off-by: Wing Li <wingers@google.com>

refactor(spe): enable FEAT_SPE for FEAT_STATE_CHECKED

At the moment we only support FEAT_SPE to be either unconditionally
compiled in, or to be not supported at all.

Add support for runtime detecti

refactor(spe): enable FEAT_SPE for FEAT_STATE_CHECKED

At the moment we only support FEAT_SPE to be either unconditionally
compiled in, or to be not supported at all.

Add support for runtime detection (ENABLE_SPE_FOR_NS=2), by splitting
is_armv8_2_feat_spe_present() into an ID register reading function and
a second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we access SPE related registers.

Previously SPE was enabled unconditionally for all platforms, change
this now to the runtime detection version.

Change-Id: I830c094107ce6a398bf1f4aef7ffcb79d4f36552
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

refactor(cpufeat): rename ENABLE_SPE_FOR_LOWER_ELS to ENABLE_SPE_FOR_NS

At the moment we hardcode the SPE functionality to be available on the
non-secure side only, by setting MDCR_EL2.E2PB accordin

refactor(cpufeat): rename ENABLE_SPE_FOR_LOWER_ELS to ENABLE_SPE_FOR_NS

At the moment we hardcode the SPE functionality to be available on the
non-secure side only, by setting MDCR_EL2.E2PB accordingly.

This should be reflected in the feature selection symbol, so rename that
to ENABLE_SPE_FOR_NS, to make it clearer that SPE is not supported in
the secure world.

Change-Id: I3f9b48eab1a45d6ccfcbb9c90a11eeb66867ad9a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge "feat(tcr2): support FEAT_TCR2" into integration

feat(tcr2): support FEAT_TCR2

Arm v8.9 introduces FEAT_TCR2, adding extended translation control
registers. Support this, context switching TCR2_EL2 and disabling
traps so lower ELs can access the n

feat(tcr2): support FEAT_TCR2

Arm v8.9 introduces FEAT_TCR2, adding extended translation control
registers. Support this, context switching TCR2_EL2 and disabling
traps so lower ELs can access the new registers.

Change the FVP platform to default to handling this as a dynamic option so
the right decision can be made by the code at runtime.

Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I297452acd8646d58bac64fc15e05b06a543e5148

show more ...

Merge "refactor(build): distinguish BL2 as TF-A entry point and BL2 running at EL3" into integration

refactor(build): distinguish BL2 as TF-A entry point and BL2 running at EL3

BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is runnin

refactor(build): distinguish BL2 as TF-A entry point and BL2 running at EL3

BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).

BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.

Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>

show more ...