plat-stm32mp2: conf: default enable CFG_STM32_I2C for stm32mp2 family

Default enable STM32 I2C driver on STM32MP2 platforms.

Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Reviewed-by

plat-stm32mp2: conf: default enable CFG_STM32_I2C for stm32mp2 family

Default enable STM32 I2C driver on STM32MP2 platforms.

Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>

show more ...

plat-stm32mp2: conf: support STM32MP23x SoC family

Add support for the STM32MP23 SoC family and the stm32mp235f-dk board.

Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Reviewed-by: E

plat-stm32mp2: conf: support STM32MP23x SoC family

Add support for the STM32MP23 SoC family and the stm32mp235f-dk board.

Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: conf: default enable CFG_SCMI_SCPFW

For STM32MP2x families the SCP firmware is the only SCMI server
supported.
Default enable CFG_SCMI_SCPFW=y in conf.mk

Signed-off-by: Thomas Bourgo

plat-stm32mp2: conf: default enable CFG_SCMI_SCPFW

For STM32MP2x families the SCP firmware is the only SCMI server
supported.
Default enable CFG_SCMI_SCPFW=y in conf.mk

Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>

show more ...

plat-stm32mp2: conf: add stm32mp257f-dk board support

Add support for the stm32mp257f-dk board.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Thomas Bourgoin <thom

plat-stm32mp2: conf: add stm32mp257f-dk board support

Add support for the stm32mp257f-dk board.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>

show more ...

plat-stm32mp2: enable watchdog SMC service

Enable Arm watchdog SMC service using function ID 0xbc000000.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Clément Le Gof

plat-stm32mp2: enable watchdog SMC service

Enable Arm watchdog SMC service using function ID 0xbc000000.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>

show more ...

plat-stm32mp2: conf: default enable CFG_STM32_IWDG

Default enable STM32 IWDG driver on STM32MP2 platforms.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Clément Le G

plat-stm32mp2: conf: default enable CFG_STM32_IWDG

Default enable STM32 IWDG driver on STM32MP2 platforms.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>

show more ...

core: panic: allow core halting on SGI in other cases than panic()

There may be cases where we want to halt several cores outside of a
panic() sequence.

Therefore, add CFG_MULTI_CORE_HALTING switch

core: panic: allow core halting on SGI in other cases than panic()

There may be cases where we want to halt several cores outside of a
panic() sequence.

Therefore, add CFG_MULTI_CORE_HALTING switch that allows to register
an interrupt handler for the CFG_HALT_CORES_SGI that is dedicated to
halt other cores.

This reduces the scope of CFG_HALT_CORES_ON_PANIC that is now used only
for halting other cores in a panic() sequence.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: stm32_rtc: add init configuration function

The init function aims to contains init configurations of the RTC
peripheral such as prescalers, config or calibration registers.
Add "CFG_STM32_H

drivers: stm32_rtc: add init configuration function

The init function aims to contains init configurations of the RTC
peripheral such as prescalers, config or calibration registers.
Add "CFG_STM32_HIGH_ACCURACY" (default to no) config to enable the
high accuracy mode which allow the highest refresh rate of the subsecond
register.
Also merge the functions `stm32_rtc_wait_sync()` with
`stm32_exit_init_mode()` as every stm32 exit init mode was followed
by a wait sync.

Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Acked-by: Etienne Carriere <etienne.carriere@foss.st.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>

show more ...

plat-stm32mp2: enable async notif with GIC PPI 15

Enables OP-TEE async notif (asynchronous notification from OP-TEE
to the non-secure world) using GIC PPI 15 (GIC interrupt line 31).

Signed-off-by:

plat-stm32mp2: enable async notif with GIC PPI 15

Enables OP-TEE async notif (asynchronous notification from OP-TEE
to the non-secure world) using GIC PPI 15 (GIC interrupt line 31).

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>

show more ...

plat-stm32mp2: add support for RTC PTA

Compile the RTC PTA and the RTC driver if the RTC driver for stm32 is
enabled.

Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Et

plat-stm32mp2: add support for RTC PTA

Compile the RTC PTA and the RTC driver if the RTC driver for stm32 is
enabled.

Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>

show more ...

plat-stm32mp2: update reset and clocks driver flags for STM32MP21

Add CFG_STM32MP21_CLK and CFG_STM32MP21_RSTCTRL flags to enable
RCC drivers.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@fo

plat-stm32mp2: update reset and clocks driver flags for STM32MP21

Add CFG_STM32MP21_CLK and CFG_STM32MP21_RSTCTRL flags to enable
RCC drivers.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>

show more ...

plat-stm32mp2: conf: default enable CFG_STM32_EXTI

Enable the driver stm32_exti on stm32mp2xx.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carr

plat-stm32mp2: conf: default enable CFG_STM32_EXTI

Enable the driver stm32_exti on stm32mp2xx.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: conf: support STM32MP21x SoC family

Add support for the STM32MP21x SoC family.

Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Reviewed-by: Gatien Chevallier <gatien.che

plat-stm32mp2: conf: support STM32MP21x SoC family

Add support for the STM32MP21x SoC family.

Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat: stm32mp2: make the platform ready to compile with SCP-Fw

STM32MP2 could use SCP-Fw to handle SCMI messages. By default this is
disabled, but it could be enable with these config:
CFG_SCMI_SC

plat: stm32mp2: make the platform ready to compile with SCP-Fw

STM32MP2 could use SCP-Fw to handle SCMI messages. By default this is
disabled, but it could be enable with these config:
CFG_SCMI_SCPFW=y
CFG_SCP_FIRMWARE=<path_to_SCP-Fw_srcs>

On STM32MP2, OP-TEE use the resources describe in the "scmi" device-tree
node to configure SCP-Fw.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: conf: support Octo-SPI manager driver

Default enable Octo-SPI manager driver on stm32mp2x platforms.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Eti

plat-stm32mp2: conf: support Octo-SPI manager driver

Default enable Octo-SPI manager driver on stm32mp2x platforms.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: add platform-specific abort handler

When a data abort occurs and its fault type is FAULT_TYPE_IGNORE, it
may be an abort generated by the SERC hardware block. Check if a
SERC Illegal

plat-stm32mp2: add platform-specific abort handler

When a data abort occurs and its fault type is FAULT_TYPE_IGNORE, it
may be an abort generated by the SERC hardware block. Check if a
SERC Illegal Access was caught and print the SERC register and panic()
if that is the case.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: conf: default enable STGEN for STM32MP2 platforms

Default enable STGEN for STM32MP2 platforms.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne C

plat-stm32mp2: conf: default enable STGEN for STM32MP2 platforms

Default enable STGEN for STM32MP2 platforms.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: enable RTC framework if CFG_DRIVERS_RTC is set

If CFG_DRIVERS_RTC is enabled, force the compilation of the file
core/drivers/rtc/rtc.c in order to share the generic functions.

Signed

plat-stm32mp2: enable RTC framework if CFG_DRIVERS_RTC is set

If CFG_DRIVERS_RTC is enabled, force the compilation of the file
core/drivers/rtc/rtc.c in order to share the generic functions.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: conf: default enable the RTC driver

Default enable the RTC driver support on stm32mp2 platforms.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne

plat-stm32mp2: conf: default enable the RTC driver

Default enable the RTC driver support on stm32mp2 platforms.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: default enable TAMP peripheral support

Default enable TAMP peripheral support for stm32mp2x platforms.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: E

plat-stm32mp2: default enable TAMP peripheral support

Default enable TAMP peripheral support for stm32mp2x platforms.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: force CFG_DRIVERS_FIREWALL when supporting RIF controllers

When firewall controllers drivers that implements firewall framework
support are embedded such as RISAB or RIFSC, then CFG_D

plat-stm32mp2: force CFG_DRIVERS_FIREWALL when supporting RIF controllers

When firewall controllers drivers that implements firewall framework
support are embedded such as RISAB or RIFSC, then CFG_DRIVERS_FIREWALL
should be forced enabled.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: default enable RISAB on stm32mp2 platforms

Default enable RISAB driver for platform stm32mp2.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Ca

plat-stm32mp2: default enable RISAB on stm32mp2 platforms

Default enable RISAB driver for platform stm32mp2.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: conf: default enable CFG_DRIVERS_FIREWALL

Default enable the CFG_DRIVERS_FIREWALL switch that is used to enable
the support of the firewall framework.

Signed-off-by: Gatien Chevallie

plat-stm32mp2: conf: default enable CFG_DRIVERS_FIREWALL

Default enable the CFG_DRIVERS_FIREWALL switch that is used to enable
the support of the firewall framework.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp2: default enable RISAF on stm32mp2 platforms

Default enable RISAF on stm32mp2 platforms to apply the device tree
RIF configuration on enabled RISAF instances.

Signed-off-by: Gatien Che

plat-stm32mp2: default enable RISAF on stm32mp2 platforms

Default enable RISAF on stm32mp2 platforms to apply the device tree
RIF configuration on enabled RISAF instances.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: stm32_rif: add stm32_rif_access_violation_action()

This function should be used by peripherals capable on raising
access violation interrupts (SERC, IAC). The behavior of the platform
on su

drivers: stm32_rif: add stm32_rif_access_violation_action()

This function should be used by peripherals capable on raising
access violation interrupts (SERC, IAC). The behavior of the platform
on such event is platform-specific. Therefore, its definition must be
done at platform level.

Also add CFG_STM32_PANIC_ON_IAC_EVENT and CFG_STM32_PANIC_ON_SERC_EVENT
to choose if the platform should panic upon receiving an IAC or a
SERC event.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...