1# 2# Copyright (c) 2013-2023, Arm Limited and Contributors. All rights reserved. 3# 4# SPDX-License-Identifier: BSD-3-Clause 5# 6 7include common/fdt_wrappers.mk 8 9# Use the GICv3 driver on the FVP by default 10FVP_USE_GIC_DRIVER := FVP_GICV3 11 12# Default cluster count for FVP 13FVP_CLUSTER_COUNT := 2 14 15# Default number of CPUs per cluster on FVP 16FVP_MAX_CPUS_PER_CLUSTER := 4 17 18# Default number of threads per CPU on FVP 19FVP_MAX_PE_PER_CPU := 1 20 21# Disable redistributor frame of inactive/fused CPU cores by marking it as read 22# only; enable redistributor frames of all CPU cores by default. 23FVP_GICR_REGION_PROTECTION := 0 24 25FVP_DT_PREFIX := fvp-base-gicv3-psci 26 27# Size (in kilobytes) of the Trusted SRAM region to utilize when building for 28# the FVP platform. This option defaults to 256. 29FVP_TRUSTED_SRAM_SIZE := 256 30 31# This is a very trickly TEMPORARY fix. Enabling ALL features exceeds BL31's 32# progbits limit. We need a way to build all useful configurations while waiting 33# on the fvp to increase its SRAM size. The problem is twofild: 34# 1. the cleanup that introduced these enables cleaned up tf-a a little too 35# well and things that previously (incorrectly) were enabled, no longer are. 36# A bunch of CI configs build subtly incorrectly and this combo makes it 37# necessary to forcefully and unconditionally enable them here. 38# 2. the progbits limit is exceeded only when the tsp is involved. However, 39# there are tsp CI configs that run on very high architecture revisions so 40# disabling everything isn't an option. 41# The fix is to enable everything, as before. When the tsp is included, though, 42# we need to slim the size down. In that case, disable all optional features, 43# that will not be present in CI when the tsp is. 44# Similarly, DRTM support is only tested on v8.0 models. Disable everything just 45# for it. 46# TODO: make all of this unconditional (or only base the condition on 47# ARM_ARCH_* when the makefile supports it). 48ifneq (${DRTM_SUPPORT}, 1) 49ifneq (${SPD}, tspd) 50 ENABLE_FEAT_AMU := 2 51 ENABLE_FEAT_AMUv1p1 := 2 52 ENABLE_FEAT_HCX := 2 53 ENABLE_MPAM_FOR_LOWER_ELS := 2 54 ENABLE_FEAT_RNG := 2 55 ENABLE_FEAT_TWED := 2 56 ENABLE_FEAT_GCS := 2 57 ENABLE_FEAT_RAS := 2 58ifeq (${ARCH}, aarch64) 59ifneq (${SPD}, spmd) 60ifeq (${SPM_MM}, 0) 61ifeq (${CTX_INCLUDE_FPREGS}, 0) 62 ENABLE_SME_FOR_NS := 2 63 ENABLE_SME2_FOR_NS := 2 64endif 65endif 66endif 67endif 68endif 69 70# enable unconditionally for all builds 71ifeq (${ARCH}, aarch64) 72ifeq (${ENABLE_RME},0) 73 ENABLE_BRBE_FOR_NS := 2 74endif 75endif 76ENABLE_TRBE_FOR_NS := 2 77ENABLE_SYS_REG_TRACE_FOR_NS := 2 78ENABLE_FEAT_CSV2_2 := 2 79ENABLE_FEAT_DIT := 2 80ENABLE_FEAT_PAN := 2 81ENABLE_FEAT_MTE_PERM := 2 82ENABLE_FEAT_VHE := 2 83CTX_INCLUDE_NEVE_REGS := 2 84ENABLE_FEAT_SEL2 := 2 85ENABLE_TRF_FOR_NS := 2 86ENABLE_FEAT_ECV := 2 87ENABLE_FEAT_FGT := 2 88ENABLE_FEAT_TCR2 := 2 89ENABLE_FEAT_S2PIE := 2 90ENABLE_FEAT_S1PIE := 2 91ENABLE_FEAT_S2POE := 2 92ENABLE_FEAT_S1POE := 2 93endif 94 95# The FVP platform depends on this macro to build with correct GIC driver. 96$(eval $(call add_define,FVP_USE_GIC_DRIVER)) 97 98# Pass FVP_CLUSTER_COUNT to the build system. 99$(eval $(call add_define,FVP_CLUSTER_COUNT)) 100 101# Pass FVP_MAX_CPUS_PER_CLUSTER to the build system. 102$(eval $(call add_define,FVP_MAX_CPUS_PER_CLUSTER)) 103 104# Pass FVP_MAX_PE_PER_CPU to the build system. 105$(eval $(call add_define,FVP_MAX_PE_PER_CPU)) 106 107# Pass FVP_GICR_REGION_PROTECTION to the build system. 108$(eval $(call add_define,FVP_GICR_REGION_PROTECTION)) 109 110# Pass FVP_TRUSTED_SRAM_SIZE to the build system. 111$(eval $(call add_define,FVP_TRUSTED_SRAM_SIZE)) 112 113# Sanity check the cluster count and if FVP_CLUSTER_COUNT <= 2, 114# choose the CCI driver , else the CCN driver 115ifeq ($(FVP_CLUSTER_COUNT), 0) 116$(error "Incorrect cluster count specified for FVP port") 117else ifeq ($(FVP_CLUSTER_COUNT),$(filter $(FVP_CLUSTER_COUNT),1 2)) 118FVP_INTERCONNECT_DRIVER := FVP_CCI 119else 120FVP_INTERCONNECT_DRIVER := FVP_CCN 121endif 122 123$(eval $(call add_define,FVP_INTERCONNECT_DRIVER)) 124 125# Choose the GIC sources depending upon the how the FVP will be invoked 126ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV3) 127 128# The GIC model (GIC-600 or GIC-500) will be detected at runtime 129GICV3_SUPPORT_GIC600 := 1 130GICV3_OVERRIDE_DISTIF_PWR_OPS := 1 131 132# Include GICv3 driver files 133include drivers/arm/gic/v3/gicv3.mk 134 135FVP_GIC_SOURCES := ${GICV3_SOURCES} \ 136 plat/common/plat_gicv3.c \ 137 plat/arm/common/arm_gicv3.c 138 139 ifeq ($(filter 1,${RESET_TO_BL2} \ 140 ${RESET_TO_BL31} ${RESET_TO_SP_MIN}),) 141 FVP_GIC_SOURCES += plat/arm/board/fvp/fvp_gicv3.c 142 endif 143 144else ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV2) 145 146# No GICv4 extension 147GIC_ENABLE_V4_EXTN := 0 148$(eval $(call add_define,GIC_ENABLE_V4_EXTN)) 149 150# Include GICv2 driver files 151include drivers/arm/gic/v2/gicv2.mk 152 153FVP_GIC_SOURCES := ${GICV2_SOURCES} \ 154 plat/common/plat_gicv2.c \ 155 plat/arm/common/arm_gicv2.c 156 157FVP_DT_PREFIX := fvp-base-gicv2-psci 158else 159$(error "Incorrect GIC driver chosen on FVP port") 160endif 161 162ifeq (${FVP_INTERCONNECT_DRIVER}, FVP_CCI) 163FVP_INTERCONNECT_SOURCES := drivers/arm/cci/cci.c 164else ifeq (${FVP_INTERCONNECT_DRIVER}, FVP_CCN) 165FVP_INTERCONNECT_SOURCES := drivers/arm/ccn/ccn.c \ 166 plat/arm/common/arm_ccn.c 167else 168$(error "Incorrect CCN driver chosen on FVP port") 169endif 170 171FVP_SECURITY_SOURCES := drivers/arm/tzc/tzc400.c \ 172 plat/arm/board/fvp/fvp_security.c \ 173 plat/arm/common/arm_tzc400.c 174 175 176PLAT_INCLUDES := -Iplat/arm/board/fvp/include \ 177 -Iinclude/lib/psa 178 179 180PLAT_BL_COMMON_SOURCES := plat/arm/board/fvp/fvp_common.c 181 182FVP_CPU_LIBS := lib/cpus/${ARCH}/aem_generic.S 183 184ifeq (${ARCH}, aarch64) 185 186# select a different set of CPU files, depending on whether we compile for 187# hardware assisted coherency cores or not 188ifeq (${HW_ASSISTED_COHERENCY}, 0) 189# Cores used without DSU 190 FVP_CPU_LIBS += lib/cpus/aarch64/cortex_a35.S \ 191 lib/cpus/aarch64/cortex_a53.S \ 192 lib/cpus/aarch64/cortex_a57.S \ 193 lib/cpus/aarch64/cortex_a72.S \ 194 lib/cpus/aarch64/cortex_a73.S 195else 196# Cores used with DSU only 197 ifeq (${CTX_INCLUDE_AARCH32_REGS}, 0) 198 # AArch64-only cores 199 # TODO: add all cores to the appropriate lists 200 FVP_CPU_LIBS += lib/cpus/aarch64/cortex_a65.S \ 201 lib/cpus/aarch64/cortex_a65ae.S \ 202 lib/cpus/aarch64/cortex_a76.S \ 203 lib/cpus/aarch64/cortex_a76ae.S \ 204 lib/cpus/aarch64/cortex_a77.S \ 205 lib/cpus/aarch64/cortex_a78.S \ 206 lib/cpus/aarch64/cortex_a78_ae.S \ 207 lib/cpus/aarch64/cortex_a78c.S \ 208 lib/cpus/aarch64/cortex_a710.S \ 209 lib/cpus/aarch64/neoverse_n_common.S \ 210 lib/cpus/aarch64/neoverse_n1.S \ 211 lib/cpus/aarch64/neoverse_n2.S \ 212 lib/cpus/aarch64/neoverse_v1.S \ 213 lib/cpus/aarch64/neoverse_e1.S \ 214 lib/cpus/aarch64/cortex_x2.S \ 215 lib/cpus/aarch64/cortex_gelas.S \ 216 lib/cpus/aarch64/nevis.S 217 endif 218 # AArch64/AArch32 cores 219 FVP_CPU_LIBS += lib/cpus/aarch64/cortex_a55.S \ 220 lib/cpus/aarch64/cortex_a75.S 221endif 222 223else 224FVP_CPU_LIBS += lib/cpus/aarch32/cortex_a32.S \ 225 lib/cpus/aarch32/cortex_a57.S \ 226 lib/cpus/aarch32/cortex_a53.S 227endif 228 229BL1_SOURCES += drivers/arm/smmu/smmu_v3.c \ 230 drivers/arm/sp805/sp805.c \ 231 drivers/delay_timer/delay_timer.c \ 232 drivers/io/io_semihosting.c \ 233 lib/semihosting/semihosting.c \ 234 lib/semihosting/${ARCH}/semihosting_call.S \ 235 plat/arm/board/fvp/${ARCH}/fvp_helpers.S \ 236 plat/arm/board/fvp/fvp_bl1_setup.c \ 237 plat/arm/board/fvp/fvp_err.c \ 238 plat/arm/board/fvp/fvp_io_storage.c \ 239 ${FVP_CPU_LIBS} \ 240 ${FVP_INTERCONNECT_SOURCES} 241 242ifeq (${USE_SP804_TIMER},1) 243BL1_SOURCES += drivers/arm/sp804/sp804_delay_timer.c 244else 245BL1_SOURCES += drivers/delay_timer/generic_delay_timer.c 246endif 247 248 249BL2_SOURCES += drivers/arm/sp805/sp805.c \ 250 drivers/io/io_semihosting.c \ 251 lib/utils/mem_region.c \ 252 lib/semihosting/semihosting.c \ 253 lib/semihosting/${ARCH}/semihosting_call.S \ 254 plat/arm/board/fvp/fvp_bl2_setup.c \ 255 plat/arm/board/fvp/fvp_err.c \ 256 plat/arm/board/fvp/fvp_io_storage.c \ 257 plat/arm/common/arm_nor_psci_mem_protect.c \ 258 ${FVP_SECURITY_SOURCES} 259 260 261ifeq (${COT_DESC_IN_DTB},1) 262BL2_SOURCES += plat/arm/common/fconf/fconf_nv_cntr_getter.c 263endif 264 265ifeq (${ENABLE_RME},1) 266BL2_SOURCES += plat/arm/board/fvp/aarch64/fvp_helpers.S 267 268BL31_SOURCES += plat/arm/board/fvp/fvp_plat_attest_token.c \ 269 plat/arm/board/fvp/fvp_realm_attest_key.c 270 271# FVP platform does not support RSS, but it can leverage RSS APIs to 272# provide hardcoded token/key on request. 273BL31_SOURCES += lib/psa/delegated_attestation.c 274 275endif 276 277ifeq (${ENABLE_FEAT_RNG_TRAP},1) 278BL31_SOURCES += plat/arm/board/fvp/fvp_sync_traps.c 279endif 280 281ifeq (${RESET_TO_BL2},1) 282BL2_SOURCES += plat/arm/board/fvp/${ARCH}/fvp_helpers.S \ 283 plat/arm/board/fvp/fvp_bl2_el3_setup.c \ 284 ${FVP_CPU_LIBS} \ 285 ${FVP_INTERCONNECT_SOURCES} 286endif 287 288ifeq (${USE_SP804_TIMER},1) 289BL2_SOURCES += drivers/arm/sp804/sp804_delay_timer.c 290endif 291 292BL2U_SOURCES += plat/arm/board/fvp/fvp_bl2u_setup.c \ 293 ${FVP_SECURITY_SOURCES} 294 295ifeq (${USE_SP804_TIMER},1) 296BL2U_SOURCES += drivers/arm/sp804/sp804_delay_timer.c 297endif 298 299BL31_SOURCES += drivers/arm/fvp/fvp_pwrc.c \ 300 drivers/arm/smmu/smmu_v3.c \ 301 drivers/delay_timer/delay_timer.c \ 302 drivers/cfi/v2m/v2m_flash.c \ 303 lib/utils/mem_region.c \ 304 plat/arm/board/fvp/fvp_bl31_setup.c \ 305 plat/arm/board/fvp/fvp_console.c \ 306 plat/arm/board/fvp/fvp_pm.c \ 307 plat/arm/board/fvp/fvp_topology.c \ 308 plat/arm/board/fvp/aarch64/fvp_helpers.S \ 309 plat/arm/common/arm_nor_psci_mem_protect.c \ 310 ${FVP_CPU_LIBS} \ 311 ${FVP_GIC_SOURCES} \ 312 ${FVP_INTERCONNECT_SOURCES} \ 313 ${FVP_SECURITY_SOURCES} 314 315# Support for fconf in BL31 316# Added separately from the above list for better readability 317ifeq ($(filter 1,${RESET_TO_BL2} ${RESET_TO_BL31}),) 318BL31_SOURCES += lib/fconf/fconf.c \ 319 lib/fconf/fconf_dyn_cfg_getter.c \ 320 plat/arm/board/fvp/fconf/fconf_hw_config_getter.c 321 322BL31_SOURCES += ${FDT_WRAPPERS_SOURCES} 323 324ifeq (${SEC_INT_DESC_IN_FCONF},1) 325BL31_SOURCES += plat/arm/common/fconf/fconf_sec_intr_config.c 326endif 327 328endif 329 330ifeq (${USE_SP804_TIMER},1) 331BL31_SOURCES += drivers/arm/sp804/sp804_delay_timer.c 332else 333BL31_SOURCES += drivers/delay_timer/generic_delay_timer.c 334endif 335 336# Add the FDT_SOURCES and options for Dynamic Config (only for Unix env) 337ifdef UNIX_MK 338FVP_HW_CONFIG_DTS := fdts/${FVP_DT_PREFIX}.dts 339FDT_SOURCES += $(addprefix plat/arm/board/fvp/fdts/, \ 340 ${PLAT}_fw_config.dts \ 341 ${PLAT}_tb_fw_config.dts \ 342 ${PLAT}_soc_fw_config.dts \ 343 ${PLAT}_nt_fw_config.dts \ 344 ) 345 346FVP_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb 347FVP_TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb 348FVP_SOC_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_soc_fw_config.dtb 349FVP_NT_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_nt_fw_config.dtb 350 351ifeq (${SPD},tspd) 352FDT_SOURCES += plat/arm/board/fvp/fdts/${PLAT}_tsp_fw_config.dts 353FVP_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tsp_fw_config.dtb 354 355# Add the TOS_FW_CONFIG to FIP and specify the same to certtool 356$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TOS_FW_CONFIG},--tos-fw-config,${FVP_TOS_FW_CONFIG})) 357endif 358 359ifeq (${SPD},spmd) 360 361ifeq ($(ARM_SPMC_MANIFEST_DTS),) 362ARM_SPMC_MANIFEST_DTS := plat/arm/board/fvp/fdts/${PLAT}_spmc_manifest.dts 363endif 364 365FDT_SOURCES += ${ARM_SPMC_MANIFEST_DTS} 366FVP_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/$(notdir $(basename ${ARM_SPMC_MANIFEST_DTS})).dtb 367 368# Add the TOS_FW_CONFIG to FIP and specify the same to certtool 369$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TOS_FW_CONFIG},--tos-fw-config,${FVP_TOS_FW_CONFIG})) 370endif 371 372# Add the FW_CONFIG to FIP and specify the same to certtool 373$(eval $(call TOOL_ADD_PAYLOAD,${FVP_FW_CONFIG},--fw-config,${FVP_FW_CONFIG})) 374# Add the TB_FW_CONFIG to FIP and specify the same to certtool 375$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TB_FW_CONFIG},--tb-fw-config,${FVP_TB_FW_CONFIG})) 376# Add the SOC_FW_CONFIG to FIP and specify the same to certtool 377$(eval $(call TOOL_ADD_PAYLOAD,${FVP_SOC_FW_CONFIG},--soc-fw-config,${FVP_SOC_FW_CONFIG})) 378# Add the NT_FW_CONFIG to FIP and specify the same to certtool 379$(eval $(call TOOL_ADD_PAYLOAD,${FVP_NT_FW_CONFIG},--nt-fw-config,${FVP_NT_FW_CONFIG})) 380 381FDT_SOURCES += ${FVP_HW_CONFIG_DTS} 382$(eval FVP_HW_CONFIG := ${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(FVP_HW_CONFIG_DTS))) 383 384# Add the HW_CONFIG to FIP and specify the same to certtool 385$(eval $(call TOOL_ADD_PAYLOAD,${FVP_HW_CONFIG},--hw-config,${FVP_HW_CONFIG})) 386endif 387 388# Enable dynamic mitigation support by default 389DYNAMIC_WORKAROUND_CVE_2018_3639 := 1 390 391ifneq (${ENABLE_FEAT_AMU},0) 392BL31_SOURCES += lib/cpus/aarch64/cpuamu.c \ 393 lib/cpus/aarch64/cpuamu_helpers.S 394 395ifeq (${HW_ASSISTED_COHERENCY}, 1) 396BL31_SOURCES += lib/cpus/aarch64/cortex_a75_pubsub.c \ 397 lib/cpus/aarch64/neoverse_n1_pubsub.c 398endif 399endif 400 401ifeq (${RAS_FFH_SUPPORT},1) 402BL31_SOURCES += plat/arm/board/fvp/aarch64/fvp_ras.c 403endif 404 405ifneq (${ENABLE_STACK_PROTECTOR},0) 406PLAT_BL_COMMON_SOURCES += plat/arm/board/fvp/fvp_stack_protector.c 407endif 408 409# Enable the dynamic translation tables library. 410ifeq ($(filter 1,${RESET_TO_BL2} ${ARM_XLAT_TABLES_LIB_V1}),) 411 ifeq (${ARCH},aarch32) 412 BL32_CPPFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC 413 else # AArch64 414 BL31_CPPFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC 415 endif 416endif 417 418ifeq (${ALLOW_RO_XLAT_TABLES}, 1) 419 ifeq (${ARCH},aarch32) 420 BL32_CPPFLAGS += -DPLAT_RO_XLAT_TABLES 421 else # AArch64 422 BL31_CPPFLAGS += -DPLAT_RO_XLAT_TABLES 423 ifeq (${SPD},tspd) 424 BL32_CPPFLAGS += -DPLAT_RO_XLAT_TABLES 425 endif 426 endif 427endif 428 429ifeq (${USE_DEBUGFS},1) 430 BL31_CPPFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC 431endif 432 433# Add support for platform supplied linker script for BL31 build 434$(eval $(call add_define,PLAT_EXTRA_LD_SCRIPT)) 435 436ifneq (${RESET_TO_BL2}, 0) 437 override BL1_SOURCES = 438endif 439 440# RSS is not supported on FVP right now. Thus, we use the mocked version 441# of the provided PSA APIs. They return with success and hard-coded token/key. 442PLAT_RSS_NOT_SUPPORTED := 1 443 444# Include Measured Boot makefile before any Crypto library makefile. 445# Crypto library makefile may need default definitions of Measured Boot build 446# flags present in Measured Boot makefile. 447ifeq (${MEASURED_BOOT},1) 448 RSS_MEASURED_BOOT_MK := drivers/measured_boot/rss/rss_measured_boot.mk 449 $(info Including ${RSS_MEASURED_BOOT_MK}) 450 include ${RSS_MEASURED_BOOT_MK} 451 452 ifneq (${MBOOT_RSS_HASH_ALG}, sha256) 453 $(eval $(call add_define,TF_MBEDTLS_MBOOT_USE_SHA512)) 454 endif 455 456 BL1_SOURCES += ${MEASURED_BOOT_SOURCES} 457 BL2_SOURCES += ${MEASURED_BOOT_SOURCES} 458endif 459 460include plat/arm/board/common/board_common.mk 461include plat/arm/common/arm_common.mk 462 463ifeq (${MEASURED_BOOT},1) 464BL1_SOURCES += plat/arm/board/fvp/fvp_common_measured_boot.c \ 465 plat/arm/board/fvp/fvp_bl1_measured_boot.c \ 466 lib/psa/measured_boot.c 467 468BL2_SOURCES += plat/arm/board/fvp/fvp_common_measured_boot.c \ 469 plat/arm/board/fvp/fvp_bl2_measured_boot.c \ 470 lib/psa/measured_boot.c 471 472# Even though RSS is not supported on FVP (see above), we support overriding 473# PLAT_RSS_NOT_SUPPORTED from the command line, just for the purpose of building 474# the code to detect any build regressions. The resulting firmware will not be 475# functional. 476ifneq (${PLAT_RSS_NOT_SUPPORTED},1) 477 $(warning "RSS is not supported on FVP. The firmware will not be functional.") 478 include drivers/arm/rss/rss_comms.mk 479 BL1_SOURCES += ${RSS_COMMS_SOURCES} 480 BL2_SOURCES += ${RSS_COMMS_SOURCES} 481 BL31_SOURCES += ${RSS_COMMS_SOURCES} 482 483 BL1_CFLAGS += -DPLAT_RSS_COMMS_PAYLOAD_MAX_SIZE=0 484 BL2_CFLAGS += -DPLAT_RSS_COMMS_PAYLOAD_MAX_SIZE=0 485 BL31_CFLAGS += -DPLAT_RSS_COMMS_PAYLOAD_MAX_SIZE=0 486endif 487 488endif 489 490ifeq (${DRTM_SUPPORT}, 1) 491BL31_SOURCES += plat/arm/board/fvp/fvp_drtm_addr.c \ 492 plat/arm/board/fvp/fvp_drtm_dma_prot.c \ 493 plat/arm/board/fvp/fvp_drtm_err.c \ 494 plat/arm/board/fvp/fvp_drtm_measurement.c \ 495 plat/arm/board/fvp/fvp_drtm_stub.c \ 496 plat/arm/common/arm_dyn_cfg.c \ 497 plat/arm/board/fvp/fvp_err.c 498endif 499 500ifeq (${TRUSTED_BOARD_BOOT}, 1) 501BL1_SOURCES += plat/arm/board/fvp/fvp_trusted_boot.c 502BL2_SOURCES += plat/arm/board/fvp/fvp_trusted_boot.c 503 504# FVP being a development platform, enable capability to disable Authentication 505# dynamically if TRUSTED_BOARD_BOOT is set. 506DYN_DISABLE_AUTH := 1 507endif 508 509ifeq (${SPMC_AT_EL3}, 1) 510PLAT_BL_COMMON_SOURCES += plat/arm/board/fvp/fvp_el3_spmc.c 511endif 512 513PSCI_OS_INIT_MODE := 1 514 515ifeq (${SPD},spmd) 516BL31_SOURCES += plat/arm/board/fvp/fvp_spmd.c 517endif 518 519# Test specific macros, keep them at bottom of this file 520$(eval $(call add_define,PLATFORM_TEST_EA_FFH)) 521ifeq (${PLATFORM_TEST_EA_FFH}, 1) 522 ifeq (${HANDLE_EA_EL3_FIRST_NS}, 0) 523 $(error "PLATFORM_TEST_EA_FFH expects HANDLE_EA_EL3_FIRST_NS to be 1") 524 endif 525BL31_SOURCES += plat/arm/board/fvp/aarch64/fvp_ea.c 526endif 527 528$(eval $(call add_define,PLATFORM_TEST_RAS_FFH)) 529ifeq (${PLATFORM_TEST_RAS_FFH}, 1) 530 ifeq (${RAS_EXTENSION}, 0) 531 $(error "PLATFORM_TEST_RAS_FFH expects RAS_EXTENSION to be 1") 532 endif 533endif 534 535ifeq (${ERRATA_ABI_SUPPORT}, 1) 536include plat/arm/board/fvp/fvp_cpu_errata.mk 537endif 538