Home
last modified time | relevance | path

Searched refs:adapter (Results 1 – 24 of 24) sorted by relevance

/rk3399_rockchip-uboot/doc/
H A DREADME.usb65 CONFIG_USB_HOST_ETHER enables USB ethernet adapter support
71 If you have a supported USB Ethernet adapter you can use it in U-Boot
75 client. In that case your board is pretending to be an Ethernet adapter
80 Ethernet adapter to which it is directly connected and the connection to
81 the outside world is your adapter's Ethernet cable. Your board becomes an
100 supported device list, so we know this adapter is supported.
104 If your adapter is not listed there is a still a chance that it will
105 work. Try looking up the manufacturer of the chip inside your adapter.
106 or take the adapter apart and look for chip markings. Then add a line
109 between the chip in your adapter and the driver. You could try to get a
[all …]
H A DREADME.fsl-esdhc4 Support Freescale adapter card type identification. This is implemented by
H A DREADME.odroid93 If you have an eMMC->microSD adapter you can prepare the card as in point 5.
166 The adapter does not come with a preconfigured MAC address, and hence it needs
H A DREADME.pxe37 ethaddr - this is the standard MAC address for the ethernet adapter in use.
/rk3399_rockchip-uboot/board/congatec/conga-qeval20-qa3-e3845/
H A DREADME21 RS232 level shifters. So a TTL-USB UART adapter does not work in
23 RS232 level signals of the PC UART via some adapter cable.
/rk3399_rockchip-uboot/board/technexion/pico-imx7d/
H A DREADME19 Connect a USB to serial adapter between the host PC and pico.
/rk3399_rockchip-uboot/board/warp/
H A DREADME20 Connect a USB to serial adapter between the host PC and warp
/rk3399_rockchip-uboot/include/
H A Di2c.h647 int adapter; member
653 #define I2C_ADAPTER(bus) i2c_bus[bus].adapter
/rk3399_rockchip-uboot/board/technexion/pico-imx6ul/
H A DREADME21 Connect a USB to serial adapter between the host PC and pico
/rk3399_rockchip-uboot/drivers/video/drm/
H A Ddrm_dp_helper.c461 int drm_dp_i2c_xfer(struct ddc_adapter *adapter, struct i2c_msg *msgs, in drm_dp_i2c_xfer() argument
464 struct drm_dp_aux *aux = container_of(adapter, struct drm_dp_aux, ddc); in drm_dp_i2c_xfer()
H A Ddw_hdmi_qp.c235 static bool drm_scdc_set_scrambling(struct ddc_adapter *adapter, bool enable) in drm_scdc_set_scrambling() argument
240 ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); in drm_scdc_set_scrambling()
251 ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config); in drm_scdc_set_scrambling()
261 drm_scdc_set_high_tmds_clock_ratio(struct ddc_adapter *adapter, bool set) in drm_scdc_set_high_tmds_clock_ratio() argument
266 ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); in drm_scdc_set_high_tmds_clock_ratio()
277 ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config); in drm_scdc_set_high_tmds_clock_ratio()
/rk3399_rockchip-uboot/board/warp7/
H A DREADME27 Connect a USB to serial adapter between the host PC and warp7
/rk3399_rockchip-uboot/board/freescale/ls1043aqds/
H A DREADME33 - SDHC port connects directly to an adapter card slot, featuring:
/rk3399_rockchip-uboot/drivers/net/
H A De1000.h1848 #define TBI_ACCEPT(adapter, status, errors, length, last_byte) \ argument
1849 ((adapter)->tbi_compatibility_on && \
1853 (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
1854 ((length) <= ((adapter)->max_frame_size + 1))) : \
1855 (((length) > (adapter)->min_frame_size) && \
1856 ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
H A DKconfig117 adapters. For more information on how to identify your adapter, go
120 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
/rk3399_rockchip-uboot/board/freescale/ls1046aqds/
H A DREADME33 - SDHC port connects directly to an adapter card slot, featuring:
/rk3399_rockchip-uboot/drivers/mtd/spi/
H A DKconfig232 Enable the MTD support for spi flash layer, this adapter is for
235 flash subsystem. Such an adapter is needed for subsystems like
/rk3399_rockchip-uboot/arch/arm/dts/
H A Dsun4i-a10-gemei-g9.dts71 * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
/rk3399_rockchip-uboot/board/freescale/ls2080ardb/
H A DREADME36 - SDHC adapter
/rk3399_rockchip-uboot/board/freescale/t102xqds/
H A DREADME88 - Supports one DDR4 or DDR3L module using DDR4 to DDR3L adapter card.
139 …For T1024QDS, the SDHC port connects directly to an adapter card slot that has the following featu…
/rk3399_rockchip-uboot/board/freescale/t1040qds/
H A DREADME84 - SDHC port connects directly to an adapter card slot, featuring:
/rk3399_rockchip-uboot/drivers/usb/gadget/
H A DKconfig109 such as an AC adapter or batteries.
/rk3399_rockchip-uboot/include/drm/
H A Ddrm_dp_helper.h1234 int drm_dp_i2c_xfer(struct ddc_adapter *adapter, struct i2c_msg *msgs,
/rk3399_rockchip-uboot/
H A DREADME1924 bus 0 on adapter 0 without a mux
1925 bus 1 on adapter 0 with a PCA9547 on address 0x70 port 1
1926 bus 2 on adapter 0 with a PCA9547 on address 0x70 port 2
1927 bus 3 on adapter 0 with a PCA9547 on address 0x70 port 3
1928 bus 4 on adapter 0 with a PCA9547 on address 0x70 port 4
1929 bus 5 on adapter 0 with a PCA9547 on address 0x70 port 5
1930 bus 6 on adapter 1 without a mux
1931 bus 7 on adapter 1 with a PCA9544 on address 0x72 port 1
1932 bus 8 on adapter 1 with a PCA9544 on address 0x72 port 2