Lines Matching refs:adapter

65 CONFIG_USB_HOST_ETHER	enables USB ethernet adapter support
71 If you have a supported USB Ethernet adapter you can use it in U-Boot
75 client. In that case your board is pretending to be an Ethernet adapter
80 Ethernet adapter to which it is directly connected and the connection to
81 the outside world is your adapter's Ethernet cable. Your board becomes an
100 supported device list, so we know this adapter is supported.
104 If your adapter is not listed there is a still a chance that it will
105 work. Try looking up the manufacturer of the chip inside your adapter.
106 or take the adapter apart and look for chip markings. Then add a line
109 between the chip in your adapter and the driver. You could try to get a
133 and one or more of the following for individual adapter hardware:
171 The 'usb start' command should identify the adapter something like this: