| /OK3568_Linux_fs/kernel/drivers/regulator/ |
| H A D | arizona-ldo1.c | 3 // arizona-ldo1.c -- LDO1 supply for Arizona devices
22 #include <linux/regulator/arizona-ldo1.h>
96 .name = "LDO1",
122 .name = "LDO1",
166 .name = "LDO1",
195 struct arizona_ldo1 *ldo1 = config->driver_data; in arizona_ldo1_of_get_pdata() local
200 init_node = of_get_child_by_name(np, "ldo1"); in arizona_ldo1_of_get_pdata()
209 init_data->consumer_supplies = &ldo1->supply; in arizona_ldo1_of_get_pdata()
227 struct arizona_ldo1 *ldo1, in arizona_ldo1_common_init() argument
238 ldo1->supply.supply = "DCVDD"; in arizona_ldo1_common_init()
[all …]
|
| H A D | tps65912-regulator.c | 27 enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3, enumerator
93 TPS65912_REGULATOR("LDO1", LDO1, "ldo1", tps65912_ops_ldo,
|
| /OK3568_Linux_fs/u-boot/test/dm/ |
| H A D | regulator.c | 31 LDO1, enumerator
131 /* Set and get the Current of LDO1 - set to 'min' constraint */ in dm_test_power_regulator_set_get_current()
132 platname = regulator_names[LDO1][PLATNAME]; in dm_test_power_regulator_set_get_current()
169 /* Set the Enable of LDO1 - default is disabled */ in dm_test_power_regulator_set_get_enable()
170 platname = regulator_names[LDO1][PLATNAME]; in dm_test_power_regulator_set_get_enable()
174 /* Get the Enable state of LDO1 and compare it with the requested one */ in dm_test_power_regulator_set_get_enable()
188 /* Set the mode id to LDO_OM_SLEEP of LDO1 - default is LDO_OM_OFF */ in dm_test_power_regulator_set_get_mode()
189 platname = regulator_names[LDO1][PLATNAME]; in dm_test_power_regulator_set_get_mode()
193 /* Get the mode id of LDO1 and compare it with the requested one */ in dm_test_power_regulator_set_get_mode()
248 * - LDO1
[all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/dts/ |
| H A D | dra71-evm.dts | 53 ldo1-in-supply =<&evm_5v0>;
75 /* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
81 lp8733_ldo1_reg: ldo1 {
82 /* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
83 regulator-name = "lp8733-ldo1";
99 ldo1-in-supply =<&vsys_3v3>;
121 /* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
129 lp8732_ldo1_reg: ldo1 {
130 /* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
131 regulator-name = "lp8732-ldo1";
|
| H A D | axp209.dtsi | 74 reg_ldo1: ldo1 {
75 /* LDO1 is a fixed output regulator */
79 regulator-name = "ldo1";
|
| /OK3568_Linux_fs/kernel/arch/arm/boot/dts/ |
| H A D | dra71-evm.dts | 89 ldo1-in-supply =<&evm_5v0>;
111 /* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
117 lp8733_ldo1_reg: ldo1 {
118 /* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
119 regulator-name = "lp8733-ldo1";
135 ldo1-in-supply =<&vsys_3v3>;
157 /* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
165 lp8732_ldo1_reg: ldo1 {
166 /* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
167 regulator-name = "lp8732-ldo1";
|
| /OK3568_Linux_fs/u-boot/drivers/power/ |
| H A D | palmas.c | 31 printf("lp873x: could not set LDO1 voltage.\n"); in lp873x_mmc1_poweron_ldo()
34 /* TURN ON LDO1 */ in lp873x_mmc1_poweron_ldo()
37 printf("lp873x: could not turn on LDO1.\n"); in lp873x_mmc1_poweron_ldo()
53 * Set TPS659038 LDO1 to 3.0 V or 1.8V in palmas_mmc1_poweron_ldo()
57 printf("tps65903x: could not set LDO1 voltage.\n"); in palmas_mmc1_poweron_ldo()
60 /* TURN ON LDO1 */ in palmas_mmc1_poweron_ldo()
64 printf("tps65903x: could not turn on LDO1.\n"); in palmas_mmc1_poweron_ldo()
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/regulator/ |
| H A D | rohm,bd70528-regulator.txt | 4 - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
12 BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
40 ldo1: LDO1 {
41 regulator-name = "ldo1";
|
| H A D | mt6360-regulator.yaml | 14 after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7
21 description: Input supply phandle(s) for LDO1/2/3
80 ldo1 {
81 regulator-compatible = "LDO1";
82 regulator-name = "mt6360,ldo1";
|
| H A D | ltc3589.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
13 nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify
22 0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1
26 and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not
71 ldo1_reg: ldo1 {
|
| H A D | qcom,rpmh-regulator.txt | 26 PM8009: smps1 - smps2, ldo1 - ldo7
27 PM8150: smps1 - smps10, ldo1 - ldo18
28 PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
29 PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
31 PM6150: smps1 - smps5, ldo1 - ldo19
32 PM6150L: smps1 - smps8, ldo1 - ldo11, bob
|
| H A D | tps65218.txt | 8 after their hardware counterparts: dcdc[1-6] and ldo1
16 regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3.
67 ldo1: regulator-ldo1 {
|
| H A D | ltc3676.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
13 nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify
24 Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output
25 0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V. The ldo1 standby
|
| H A D | pv88090.txt | 11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
51 LDO1 {
52 regulator-name = "ldo1";
|
| H A D | nxp,pca9450-regulator.yaml | 22 #LDO1, LDO2, LDO3, LDO4, LDO5
142 ldo1: LDO1 {
143 regulator-name = "LDO1";
|
| H A D | slg51000.txt | 29 ldo1
46 ldo1 {
47 regulator-name = "ldo1";
|
| H A D | lp872x.txt | 34 LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck)
35 LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2)
61 vaf: ldo1 {
105 vcam_io: ldo1 {
|
| H A D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
35 LDO1 {
36 regulator-name = "ldo1";
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/mfd/ |
| H A D | wm831x.txt | 43 ldo1 : LDO1
75 ldo1: ldo1 {
76 regulator-name = "LDO1";
|
| H A D | lp873x.txt | 12 buck0, buck1, ldo0 or ldo1.
26 ldo1-in-supply = <&vsys_3v3>;
59 lp8733_ldo1: ldo1 {
60 regulator-name = "lp8733-ldo1";
|
| H A D | da9055.txt | 35 ldo1 : regulator LDO1
65 ldo1: LDO1 {
|
| /OK3568_Linux_fs/kernel/include/linux/mfd/madera/ |
| H A D | pdata.h | 12 #include <linux/regulator/arizona-ldo1.h>
29 * @ldo1: Substruct of pdata for the LDO1 regulator
44 struct arizona_ldo1_pdata ldo1; member
|
| /OK3568_Linux_fs/u-boot/doc/device-tree-bindings/regulator/ |
| H A D | sandbox.txt | 16 The sandbox PMIC can support: ldo1, ldo2, buck1, buck2.
24 - regulator-min-microamps: minimum allowed Current limit to set (LDO1/BUCK1)
25 - regulator-max-microamps: minimum allowed Current limit to set (LDO1/BUCK1)
31 ldo1 {
|
| /OK3568_Linux_fs/u-boot/include/power/ |
| H A D | sandbox_pmic.h | 83 /* LDO1 Voltage: min: 0.8V, step: 25mV, max 2.4V */
88 /* LDO1 Amperage: min: 100mA, step: 50mA, max: 200mA */
116 #define SANDBOX_LDO1_DEVNAME "ldo1"
136 /* LDO1/2 for testing regulator_list_autoset() */
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mn-evk.dts | 71 ldo1: LDO1 { label
72 regulator-name = "LDO1";
|