arch: powerpc: Move CONFIG_FSL_ELBC to Kconfig

Enable ELBC from Kconfig.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

mmc: move CONFIG_GENERIC_MMC to Kconfig

Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

Let's create an entry for "config GENERIC_MMC" with "default MMC",
then convert all macro defines in

mmc: move CONFIG_GENERIC_MMC to Kconfig

Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

Let's create an entry for "config GENERIC_MMC" with "default MMC",
then convert all macro defines in headers to Kconfig. Almost all
of the defines will go away.

I see only two exceptions:
configs/blanche_defconfig
configs/sandbox_noblk_defconfig

They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something
might be wrong with these two boards, so should be checked later.

Anyway, this is the output of the moveconfig tool.

This commit was created as follows:

[1] create a config entry in drivers/mmc/Kconfig

[2] tools/moveconfig.py -r HEAD GENERIC_MMC

[3] manual clean-up of garbage comments in doc/README.* and
include/configs/*.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

disk: convert CONFIG_DOS_PARTITION to Kconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>

Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig

This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_F

Signed-off-by: Simon Glass <sjg@chromium.org>

ddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS to Kconfig

Use option NUM_DDR_CONTROLLERS in ddr Kconfig and clean up existing
usage in ls102xa and fsl-layerscape. Remove all powerpc macros in
confi

ddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS to Kconfig

Use option NUM_DDR_CONTROLLERS in ddr Kconfig and clean up existing
usage in ls102xa and fsl-layerscape. Remove all powerpc macros in
config header and board header files.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

fsl_ddr: Move DDR config options to driver Kconfig

Create driver/ddr/fsl/Kconfig and move existing options. Clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Migrate sbc8

fsl_ddr: Move DDR config options to driver Kconfig

Create driver/ddr/fsl/Kconfig and move existing options. Clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Migrate sbc8641d, xpedite537x and MPC8536DS, run a moveconfig.py -s]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

powerpc: E500: Move CONFIG_E500 and CONFIG_E500MC to Kconfig

Use Kconfig option for E500 and E500MC macros.

Signed-off-by: York Sun <york.sun@nxp.com>

mmc: complete unfinished move of CONFIG_MMC

Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
a Kconfig entry for this option without any actual moves, then
commit 44c798799f66 ("sunxi

mmc: complete unfinished move of CONFIG_MMC

Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
a Kconfig entry for this option without any actual moves, then
commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
instances only for SUNXI.

We generally do not like such partial moves. This kind of work
is automated by tools/moveconfig.py, so it is pretty easy to
complete this move.

I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
This shortens the configs and will ease new board porting.

This commit was created as follows:

[1] Edit Kconfig (remove the "depends on", add the "default",
copy the prompt and help message from Linux)

[2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

show more ...

Merge git://git.denx.de/u-boot-mpc85xx

powerpc: mpc85xx: Move CONFIG_FSL_LAW to Kconfig

Some header files have this macro defined conditionally and
redefined unconditionally. Remove all existing definitions.

Signed-off-by: York Sun <yor

powerpc: mpc85xx: Move CONFIG_FSL_LAW to Kconfig

Some header files have this macro defined conditionally and
redefined unconditionally. Remove all existing definitions.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

Merge git://git.denx.de/u-boot-mpc85xx

powerpc: P2020: Remove macro CONFIG_P2020

Replace CONFIG_P2020 with ARCH_P2020 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>

powerpc: P1025: Remove macro CONFIG_P1025

Replace CONFIG_P1025 with ARCH_P1025 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>

powerpc: P1024: Remove CONFIG_P1024

Replace CONFIG_P1024 with ARCH_P1024 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>

powerpc: P1021: Remove macro CONFIG_P1021

Replace CONFIG_P1021 with ARCH_P1021 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>

powerpc: P1020: Remove macro CONFIG_P1020

Replace CONFIG_P1020 with ARCH_P1020 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>

powerpc: P2020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P2020RDB_PC instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P2020RDB.

Signed-

powerpc: P2020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P2020RDB_PC instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P2020RDB.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

powerpc: P1025RDB: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1025RDB instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P1025RDB.

Signed-off-by

powerpc: P1025RDB: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1025RDB instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P1025RDB.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

powerpc: P1024RDB: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1024RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1024RDB.

Signed-off-by

powerpc: P1024RDB: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1024RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1024RDB.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

powerpc: P1021RDB: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1021RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1021RDB.

Signed-off-by

powerpc: P1021RDB: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1021RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1021RDB.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

powerpc: P1020UTM: Separate from P1_P2_RDB_P2 in Kconfig

Use TARGET_P1020UTM instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020UTM.

Signed

powerpc: P1020UTM: Separate from P1_P2_RDB_P2 in Kconfig

Use TARGET_P1020UTM instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020UTM.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

powerpc: P1020RDB-PD: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1020RDB_PD instead of sharing with P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020RDB_PD.

Sign

powerpc: P1020RDB-PD: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1020RDB_PD instead of sharing with P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020RDB_PD.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

powerpc: P1020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1020RDB_PC instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020RDB_PC

powerpc: P1020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1020RDB_PC instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020RDB_PC.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

powerpc: P1020MBG: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1020MBG instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and other macros.

Remove macro CONFIG_P1020MBG.

Signed-

powerpc: P1020MBG: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1020MBG instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and other macros.

Remove macro CONFIG_P1020MBG.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

pci: Move CONFIG_PCI_PNP to Kconfig

Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig
to use that.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsul

pci: Move CONFIG_PCI_PNP to Kconfig

Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig
to use that.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Re-generate configs and include/configs/ changes]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...