Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

aspeed: Refactor SCU to use consistent mask & shift

Refactor SCU header to use consistent Mask & Shift values.
Now, consistently, to read value from SCU register, mask needs
to be applied before shi

aspeed: Refactor SCU to use consistent mask & shift

Refactor SCU header to use consistent Mask & Shift values.
Now, consistently, to read value from SCU register, mask needs
to be applied before shift.

Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

aspeed: Add support for Clocks needed by MACs

Add support for clocks needed by MACs to ast2500 clock driver.
The clocks are D2-PLL, which is used by both MACs and PCLK_MAC1 and
PCLK_MAC2 for MAC1 an

aspeed: Add support for Clocks needed by MACs

Add support for clocks needed by MACs to ast2500 clock driver.
The clocks are D2-PLL, which is used by both MACs and PCLK_MAC1 and
PCLK_MAC2 for MAC1 and MAC2 respectively.

The rate of D2-PLL is hardcoded to 250MHz -- the value used in Aspeed
SDK. It is not entirely clear from the datasheet how this clock is used
by MACs, so not clear if the rate would ever need to be different. So,
for now, hardcoding it is probably safer.

The rate of PCLK_MAC{1,2} is chosen based on MAC speed selected through
hardware strapping.

So, the network driver would only need to enable these clocks, no need
to configure the rate.

Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

aspeed: Add P-Bus clock in ast2500 clock driver

Add P-Bus Clock support to ast2500 clock driver.
This is the clock used by I2C devices.

Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by:

aspeed: Add P-Bus clock in ast2500 clock driver

Add P-Bus Clock support to ast2500 clock driver.
This is the clock used by I2C devices.

Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

aspeed: AST2500 Pinctrl Driver

This driver uses Generic Pinctrl framework and is compatible with
the Linux driver for ast2500: it uses the same device tree
configuration.

Not all pins are supported

aspeed: AST2500 Pinctrl Driver

This driver uses Generic Pinctrl framework and is compatible with
the Linux driver for ast2500: it uses the same device tree
configuration.

Not all pins are supported by the driver at the moment, so it actually
compatible with ast2400. In general, however, there are differences that
in the future would be easier to maintain separately.

Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

aspeed: Reset Driver

Add Reset Driver for ast2500 SoC. This driver uses Watchdog Timer to
perform resets and thus depends on it. The actual Watchdog device used
needs to be configured in Device Tree

aspeed: Reset Driver

Add Reset Driver for ast2500 SoC. This driver uses Watchdog Timer to
perform resets and thus depends on it. The actual Watchdog device used
needs to be configured in Device Tree using "aspeed,wdt" property, which
must be WDT phandle, for example:

rst: reset-controller {
compatible = "aspeed,ast2500-reset";
aspeed,wdt = <&wdt1>;
}

Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

aspeed: Make SCU lock/unlock functions part of SCU API

Make functions for locking and unlocking SCU part of SCU API.
Many drivers need to modify settings in SCU and thus need to unlock it
first. Thi

aspeed: Make SCU lock/unlock functions part of SCU API

Make functions for locking and unlocking SCU part of SCU API.
Many drivers need to modify settings in SCU and thus need to unlock it
first. This change makes it possible.

Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

aspeed: Add basic ast2500-specific drivers and configuration

Clock Driver

This driver is ast2500-specific and is not compatible with earlier
versions of this chip. The differences are not that big,

aspeed: Add basic ast2500-specific drivers and configuration

Clock Driver

This driver is ast2500-specific and is not compatible with earlier
versions of this chip. The differences are not that big, but they are
in somewhat random places, so making it compatible with ast2400 is not
worth the effort at the moment.

SDRAM MC driver

The driver is very ast2500-specific and is completely incompatible
with previous versions of the chip.

The memory controller is very poorly documented by Aspeed in the
datasheet, with any mention of the whole range of registers missing. The
initialization procedure has been basically taken from Aspeed SDK, where
it is implemented in assembly. Here it is rewritten in C, with very limited
understanding of what exactly it is doing.
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...