Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

mxs: Do not disable bo detection when DC-DC is already enabled

In case the DC-DC is already enabled mxs_enable_4p2_dcdc_input() returns
without reenabling brown out detection. So fix this issue by
m

mxs: Do not disable bo detection when DC-DC is already enabled

In case the DC-DC is already enabled mxs_enable_4p2_dcdc_input() returns
without reenabling brown out detection. So fix this issue by
moving the return before brown out deactivation.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

arm: rmobile: alt: Update to QoS revision 0.31 and 0.321

This updates r8a7794 QoS to revision 0.31 for ES1 and revision 0.321 for ES2.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off

arm: rmobile: alt: Update to QoS revision 0.31 and 0.321

This updates r8a7794 QoS to revision 0.31 for ES1 and revision 0.321 for ES2.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

show more ...

arm: rmobile: gose: Update to QoS revision 0.311

This updates r8a7793 QoS to revision 0.311.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.

arm: rmobile: gose: Update to QoS revision 0.311

This updates r8a7793 QoS to revision 0.311.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

show more ...

arm: rmobile: koelsch: Update to QoS revision 0.411

This updates r8a7791 QoS to revision 0.411.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamat

arm: rmobile: koelsch: Update to QoS revision 0.411

This updates r8a7791 QoS to revision 0.411.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

show more ...

arm: rmobile: lager: Update to QoS revision 0.973

This updates r8a7790 QoS to revision 0.973.
This commit can changed from KConfig to fit contents of the QoS.

Signed-off-by: Kouei Abe <kouei.abe.cp

arm: rmobile: lager: Update to QoS revision 0.973

This updates r8a7790 QoS to revision 0.973.
This commit can changed from KConfig to fit contents of the QoS.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

show more ...

ARM: sunxi: Share sun6i PSCI backend with sun8i

sun8i can share the PSCI backend with sun6i. Only difference
is sun8i does not have CPU power clamp controls.

Signed-off-by: Chen-Yu Tsai <wens@csie.

ARM: sunxi: Share sun6i PSCI backend with sun8i

sun8i can share the PSCI backend with sun6i. Only difference
is sun8i does not have CPU power clamp controls.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

ARM: sunxi: Add sun6i specific PSCI implementation

This adds PSCI support for sun6i. So far it only supports
the PWR_ON method.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <

ARM: sunxi: Add sun6i specific PSCI implementation

This adds PSCI support for sun6i. So far it only supports
the PWR_ON method.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

ARM: sunxi: Make PSCI code sun7i specific

The PSCI code only works for sun7i. Rename it with _sun7i suffix,
and build only if building for sun7i.

This paves the way for adding PSCI support for othe

ARM: sunxi: Make PSCI code sun7i specific

The PSCI code only works for sun7i. Rename it with _sun7i suffix,
and build only if building for sun7i.

This paves the way for adding PSCI support for other platforms.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

ARM: sunxi: Document registers in PSCI code

The PSCI CPU_ON code accesses quite a few registers. Document
their names to make it easier to cross reference.

Also explain "lock cpu" and "unlock cpu"

ARM: sunxi: Document registers in PSCI code

The PSCI CPU_ON code accesses quite a few registers. Document
their names to make it easier to cross reference.

Also explain "lock cpu" and "unlock cpu" as enabling/disabling
debug access.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory

This commit adds support to the sunxi SPL to load u-boot from the internal
NAND. Note this only adds support to access

sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory

This commit adds support to the sunxi SPL to load u-boot from the internal
NAND. Note this only adds support to access the boot partitions to load
u-boot, full NAND support to load the kernel, etc. from the nand data
partition will come later.

Signed-off-by: Roy Spliet <r.spliet@ultimaker.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

sun9i: Basic sun9i (A80) support

Add initial sun9i (A80) support, only uart + mmc are supported for now.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.u

sun9i: Basic sun9i (A80) support

Add initial sun9i (A80) support, only uart + mmc are supported for now.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: Remove support for building "old-fashioned" fel binaries

The latest versions of the fel tool support loading normal u-boot builds
directly, and this is now the preferred way to use the fel bo

sunxi: Remove support for building "old-fashioned" fel binaries

The latest versions of the fel tool support loading normal u-boot builds
directly, and this is now the preferred way to use the fel boot method.

This commit removes support for the old deprecated standalone fel builds.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: Use axp221 sid on a33

Unlike the A31 and the A23 the A33 actually has a SID inside the SoC again,
but sid[3] is 0 (at least on some SoCs), so it is better to use the axp221
sid.

Signed-off-b

sunxi: Use axp221 sid on a33

Unlike the A31 and the A23 the A33 actually has a SID inside the SoC again,
but sid[3] is 0 (at least on some SoCs), so it is better to use the axp221
sid.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

ARMv7M: add STM32F1 support

Add ARMv7M STM32F1 support including clocks, timer, gpio, and flash.

Signed-off-by: Matt Porter <mporter@konsulko.com>

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

arm, imx6, i2c: add I2C4 for MX6DL

add I2C4 modul for MX6DL based boards.

Signed-off-by: Heiko Schocher <hs@denx.de>

sunxi: Make DRAM_ODT_EN Kconfig setting a bool

Make DRAM_ODT_EN Kconfig setting a bool, add a separate DRAM_ODT_CORRECTION
setting for A23 SoCs and use DRAM_ODT_EN Kconfig everywhere instead of
only

sunxi: Make DRAM_ODT_EN Kconfig setting a bool

Make DRAM_ODT_EN Kconfig setting a bool, add a separate DRAM_ODT_CORRECTION
setting for A23 SoCs and use DRAM_ODT_EN Kconfig everywhere instead of
only in dram_sun4i.c and hardcoding odt_en elsewhere.

Note this commit makes no functional changes for existing boards,
its purpose is to allow changing the odt_en value on future A33 boards.

For sun4i/sun5i/sun7i boards which set DRAM_ODT_EN=y (which no defconfigs
currently do) this patch turns on odt for both the DQ and the DQS lines,
whereas previously it was possibly (but not desirable) to turn odt on only
for one of them by setting the in DRAM_ODT_EN option to 1 or 2 instead of 3.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

show more ...

sunxi: Fix dram initialization not working on some a33 devices

When porting the allwinner dram init code to u-boot we missed some code
setting an extra bit when doing auto dram config.

This commits

sunxi: Fix dram initialization not working on some a33 devices

When porting the allwinner dram init code to u-boot we missed some code
setting an extra bit when doing auto dram config.

This commits add this bit, fixing dram init not working on the ga10h
10" a33 tablet which I'm bringing up atm.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: add support for UART2 on A23/A33

Add support for UART2 (2-pin version but note that RTS/CTS pins are available
pn that port for possible future use), can be selected in config
by using CONFIG

sunxi: add support for UART2 on A23/A33

Add support for UART2 (2-pin version but note that RTS/CTS pins are available
pn that port for possible future use), can be selected in config
by using CONFIG_CONS_INDEX=3

Signed-off-by: Laurent Itti <laurentitti@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTP

The MX6 has a temperature grade defined by OCOTP_MEM0[7:6] which is at 0x480
in the Fusemap Description Table in the referen

imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTP

The MX6 has a temperature grade defined by OCOTP_MEM0[7:6] which is at 0x480
in the Fusemap Description Table in the reference manual. Return this value
as well as min/max temperature based on the value.

Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the
their Fusemap Description Table however Freescale has confirmed that these
eFUSE bits match the description within the IMX6DQRM and that they will
be added to the next revision of the respective reference manuals.

This has been tested with IMX6 Automative and Industrial parts.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTP

The IMX6 has four different speed grades determined by eFUSE SPEED_GRADING
indicated by OCOTP_CFG3[17:16] which is at 0x4

imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTP

The IMX6 has four different speed grades determined by eFUSE SPEED_GRADING
indicated by OCOTP_CFG3[17:16] which is at 0x440 in the Fusemap Description
Table. Return this frequency so that it can be used elsewhere.

Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the
their Fusemap Description Table however Freescale has confirmed that these
eFUSE bits match the description within the IMX6DQRM and that they will
be added to the next revision of the respective reference manuals.

These have been tested with IMX6 Quad/Solo/Dual-light 800Mhz and 1GHz grades.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specified

Commit fa8b7d66f49f0c7bd41467fe78f6488d8af6976a introduced fast-exit support
to the MMDC however enabling it on the DDR3 got missed. Ma

arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specified

Commit fa8b7d66f49f0c7bd41467fe78f6488d8af6976a introduced fast-exit support
to the MMDC however enabling it on the DDR3 got missed. Make sure we enable
it on the DDR3 as well.

Gateworks uses Micron memory as well as Winbond in MX6. We have found in
testing that we need to enable fast-exit for Winbond stability. Gateworks
boards are currently the only boards using the MX6 SPL and enabling
fast-exit mode.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

Merge git://git.denx.de/u-boot-samsung

exynos: clock: clean up checkpatch issues

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>