Merge changes I8f3afbe3,I441e7c69,I2e9465f7,Ib8756cd3,Iebe6ea7c, ... into integration

* changes:
plat/marvell: remove subversion from Marvell make files
drivers/marvell: check if TRNG unit is pr

Merge changes I8f3afbe3,I441e7c69,I2e9465f7,Ib8756cd3,Iebe6ea7c, ... into integration

* changes:
plat/marvell: remove subversion from Marvell make files
drivers/marvell: check if TRNG unit is present
plat/marvell: a8k: move efuse definitions to separate header
plat/marvell/armada: fix TRNG return SMC handling
drivers: marvell: comphy: add rx training on 10G port
plat/marvell/armada: postpone MSS CPU startup to BL31 stage
plat: marvell: armada: a8k: Fix LD selector mask
plat/marvell/armada: allow builds without MSS support
drivers: marvell: misc-dfx: extend dfx whitelist
drivers: marvell: add support for secure read/write of dfx register-set
ddr_phy: use smc calls to access ddr phy registers
drivers: marvell: thermal: use dedicated function for thermal SiPs
drivers: marvell: add thermal sensor driver and expose it via SIP service
fix: plat: marvell: fix MSS loader for A8K family

show more ...

plat/marvell: remove subversion from Marvell make files

Subversion is not reflecting the Marvell sources variant anymore.
This patch removes version.mk from Marvell plafroms.

Signed-off-by: Konstan

plat/marvell: remove subversion from Marvell make files

Subversion is not reflecting the Marvell sources variant anymore.
This patch removes version.mk from Marvell plafroms.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: I8f3afbe3fab3a38da68876f77455f449f5fe0179

show more ...

drivers/marvell: check if TRNG unit is present

Some Marvell SoCs may have crypto engine disabled in the HW.
This patch checks the AP LD0 efuse for crypto engine/TRNG
presence before initializing the

drivers/marvell: check if TRNG unit is present

Some Marvell SoCs may have crypto engine disabled in the HW.
This patch checks the AP LD0 efuse for crypto engine/TRNG
presence before initializing the driver.

Change-Id: I441e7c69a137106bd36302b028b04c0b31896dbd
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/47314
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Yi Guo <yi.guo@cavium.com>

show more ...

plat/marvell: a8k: move efuse definitions to separate header

Move efuse definitions to a separate header file for later
usage with other FW modules.

Change-Id: I2e9465f760d0388c8e5863bc64a4cdc57de2

plat/marvell: a8k: move efuse definitions to separate header

Move efuse definitions to a separate header file for later
usage with other FW modules.

Change-Id: I2e9465f760d0388c8e5863bc64a4cdc57de2417f
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/47313
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Yi Guo <yi.guo@cavium.com>

show more ...

plat/marvell/armada: fix TRNG return SMC handling

Use single 64b register for the return value instead of two 32b.
Report an error if caller requested larger than than 64b random
number in a single

plat/marvell/armada: fix TRNG return SMC handling

Use single 64b register for the return value instead of two 32b.
Report an error if caller requested larger than than 64b random
number in a single SMC call.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Ib8756cd3c0808b78c359f90c6f6913f7d16ac360
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/33280
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>

show more ...

drivers: marvell: comphy: add rx training on 10G port

This patch forces rx training on 10G ports
as part of comphy_smc call from Linux.

Signed-off-by: Alex Evraev <alexev@marvell.com>
Change-Id: Ie

drivers: marvell: comphy: add rx training on 10G port

This patch forces rx training on 10G ports
as part of comphy_smc call from Linux.

Signed-off-by: Alex Evraev <alexev@marvell.com>
Change-Id: Iebe6ea7c8b21cbdce5c466c8a69b92e9d7c8a8ca
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/30763
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>

show more ...

plat/marvell/armada: postpone MSS CPU startup to BL31 stage

Normally the CP MSS CPU was started at the end of FW load to IRAM at BL2.
However, (especailly in secure boot mode), some bus attributes s

plat/marvell/armada: postpone MSS CPU startup to BL31 stage

Normally the CP MSS CPU was started at the end of FW load to IRAM at BL2.
However, (especailly in secure boot mode), some bus attributes should be
changed from defaults before the MSS CPU tries to access shared resources.
This patch starts to use CP MSS SRAM for FW load in both secure and
non-secure boot modes.
The FW loader inserts a magic number into MSS SRAM as an indicator of
successfully loaded FS during the BL2 stage and skips releasing the MSS
CPU from the reset state.
Then, at BL31 stage, the MSS CPU is released from reset following the
call to cp110_init function that handles all the required bus attributes
configurations.

Change-Id: Idcf81cc350a086835abed365154051dd79f1ce2e
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/46890
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>

show more ...

plat: marvell: armada: a8k: Fix LD selector mask

Fixed a bug that the actually bit number was used as a mask to
select LD0 or LD1 fuse

Signed-off-by: Guo Yi <yguo@cavium.com>
Change-Id: I4bec268c3d

plat: marvell: armada: a8k: Fix LD selector mask

Fixed a bug that the actually bit number was used as a mask to
select LD0 or LD1 fuse

Signed-off-by: Guo Yi <yguo@cavium.com>
Change-Id: I4bec268c3dc2566350b4a73f655bce222707e25b
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/46146
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

plat/marvell/armada: allow builds without MSS support

Setting MSS_SUPPORT to 0 also removes requirement for SCP_BL2
definition.
Images build with MSS_SUPPORT=0 will not include service CPUs
FW and w

plat/marvell/armada: allow builds without MSS support

Setting MSS_SUPPORT to 0 also removes requirement for SCP_BL2
definition.
Images build with MSS_SUPPORT=0 will not include service CPUs
FW and will not support PM, FC and other features implemented
in these FW images.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Idf301ebd218ce65a60f277f3876d0aeb6c72f105
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/37769
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>

show more ...

drivers: marvell: misc-dfx: extend dfx whitelist

Linux cpu clk driver requires access to some dfx registers. By adding
these registers to the white list, we enable access to them from
non-secure wor

drivers: marvell: misc-dfx: extend dfx whitelist

Linux cpu clk driver requires access to some dfx registers. By adding
these registers to the white list, we enable access to them from
non-secure world.

Change-Id: Ic05c96b375121c025bfb41c2ac9474a530720155
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25187
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

drivers: marvell: add support for secure read/write of dfx register-set

Since the dfx register set is going to be marked as secure expose dfx
secure read and write function via SiP services. In intr

drivers: marvell: add support for secure read/write of dfx register-set

Since the dfx register set is going to be marked as secure expose dfx
secure read and write function via SiP services. In introduced misc_dfx
driver some registers are white-listed so non-secure software can still
access them.

This will allow non-secure word drivers access some white-listed
registers related to e.g.: Sample at reset, efuses, SoC type and
revision ID accesses.

Change-Id: If9ae2da51ab2e6ca62b9a2c940819259bf25edc0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25055
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

ddr_phy: use smc calls to access ddr phy registers

Added smc calls support to access ddr phy registers.

Change-Id: Ibaa0a8e20b6398ab394c7e2e9ea61f9a28cdb870
Signed-off-by: Alex Leibovich <alexl@mar

ddr_phy: use smc calls to access ddr phy registers

Added smc calls support to access ddr phy registers.

Change-Id: Ibaa0a8e20b6398ab394c7e2e9ea61f9a28cdb870
Signed-off-by: Alex Leibovich <alexl@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/20791
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

drivers: marvell: thermal: use dedicated function for thermal SiPs

Since more drivers which uses dfx register set need to be handled with
use of SiP services, use dedicated and more meaningful name

drivers: marvell: thermal: use dedicated function for thermal SiPs

Since more drivers which uses dfx register set need to be handled with
use of SiP services, use dedicated and more meaningful name for thermal
SiP services.

Change-Id: Ic2ac27535a4902477df8edc4c86df3e34cb2344f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25054
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

drivers: marvell: add thermal sensor driver and expose it via SIP service

Since the dfx register set is going to be marked as secure (in order to
protect efuse registers for non secure access), acce

drivers: marvell: add thermal sensor driver and expose it via SIP service

Since the dfx register set is going to be marked as secure (in order to
protect efuse registers for non secure access), accessing thermal
registers which are part of dfx register set, will not be possible from
lower exception levels. Due to above expose thermal driver as a SiP
service. This will allow Linux and U-Boot thermal driver to initialise
and perform various operations on thermal sensor.

The thermal sensor driver is based on Linux
drivers/thermal/armada_thermal.c.

Change-Id: I4763a3bf5c43750c724c86b1dcadad3cb729e93e
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/20581
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Tested-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

fix: plat: marvell: fix MSS loader for A8K family

Wrong brakets caused MSS FW load timeout error:
ERROR: MSS DMA failed (timeout)
ERROR: MSS FW chunk 0 load failed
ERROR: SCP Image load failed

fix: plat: marvell: fix MSS loader for A8K family

Wrong brakets caused MSS FW load timeout error:
ERROR: MSS DMA failed (timeout)
ERROR: MSS FW chunk 0 load failed
ERROR: SCP Image load failed

This patch fixes the operator precedence in MSS FW load.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: I78c215606bde112f40429926c51f5fa1e4334c13

show more ...

mediatek: mt8192: devapc: Add devapc driver

Add devapc driver for setting default permission.

Change-Id: I103f27ae090fbed76ce9319606ac082d78b74566
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>

Merge "services: spm_mm: Use sp_boot_info to set SP context" into integration

Add documentation for SMMUv3 driver in Hafnium(SPM)

Change-Id: I0b38c114fd2958d2b4040585611cafa132ccfd9c
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

services: spm_mm: Use sp_boot_info to set SP context

The current SPM_MM implementations expects the SP image addresses
as static macros. This means platforms wanting to use dynamically
allocated mem

services: spm_mm: Use sp_boot_info to set SP context

The current SPM_MM implementations expects the SP image addresses
as static macros. This means platforms wanting to use dynamically
allocated memory addresses are left out. This patch gets sp_boot_info
at the beginning of spm_sp_setup function and uses member variables
of sp_boot_info to setup the context. So member variables of
struct sp_boot_info and consequently the context can be initialized
by static macros or dynamiclly allocated memory address..

Change-Id: I1cb75190ab8026b845ae20a9c6cc416945b5d7b9
Signed-off-by: Mayur Gudmeti <mgudmeti@nvidia.com>

show more ...

build(hooks): add commitlint hook

This change adds a configuration for commitlint - a tool designed to
enforce a particular commit message style - and run it as part of Git's
commit-msg hook. This v

build(hooks): add commitlint hook

This change adds a configuration for commitlint - a tool designed to
enforce a particular commit message style - and run it as part of Git's
commit-msg hook. This validates commits immediately after the editor has
been exited, and the configuration is derived from the configuration we
provide to Commitizen.

While the configuration provided suggests a maximum header and body
length, neither of these are hard errors. This is to accommodate the
occasional commit where it may be difficult or impossible to comply
with the length requirements (for example, with a particularly long
scope, or a long URL in the message body).

Change-Id: Ib5e90472fd1f1da9c2bff47703c9682232ee5679
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

build(hooks): add Commitizen hook

This change adds Commitizen, an interactive tool for writing commit
messages, to the package.json file. This installs Commitizen within the
`node_modules` directory

build(hooks): add Commitizen hook

This change adds Commitizen, an interactive tool for writing commit
messages, to the package.json file. This installs Commitizen within the
`node_modules` directory automatically when developers invoke
`npm install` from the root repository directory.

Additionally, this change adds a prepare-commit-msg Git hook which
invokes Commitizen prior to generation of the default commit message.
It may be exited with the standard ^C signal without terminating the
commit process for those who desperately want to avoid using it, but
otherwise should encourage developers to conform to the new commit style
without running into post-commit linting errors.

Change-Id: I8a1e268ed40b61af38519d13d62b116fce76a494
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

build(hooks): add Gerrit hook

This change adds the Gerrit commit-msg hook to Husky, such that it now
no longer requires manual installation by the developer.

This hook was pulled directly from the

build(hooks): add Gerrit hook

This change adds the Gerrit commit-msg hook to Husky, such that it now
no longer requires manual installation by the developer.

This hook was pulled directly from the TF-A Gerrit review server.

Change-Id: I79c9b0ce78fd326fda6db7a930b7277690177f28
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

build(hooks): add Husky configuration

Husky is a tool for managing Git hooks within the repository itself.
Traditionally, commit hooks need to be manually installed on a per-user
basis, but Husky al

build(hooks): add Husky configuration

Husky is a tool for managing Git hooks within the repository itself.
Traditionally, commit hooks need to be manually installed on a per-user
basis, but Husky allows us to install these hooks either automatically
when `npm install` is invoked within the repository, or manually with
`npx husky install`.

This will become useful for us in the next few patches when we begin
introducing tools for enforcing a commit message style.

Change-Id: I64cae147e9ea910347416cfe0bcc4652ec9b4830
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

Arm: Fix error message printing in board makefile

Remove an incorrect tabulation in front of an $(error) function call
outside of a recipe, which caused the following text to be displayed:

plat/a

Arm: Fix error message printing in board makefile

Remove an incorrect tabulation in front of an $(error) function call
outside of a recipe, which caused the following text to be displayed:

plat/arm/board/common/board_common.mk:36: *** recipe commences before first target. Stop.

instead of:

plat/arm/board/common/board_common.mk:36: *** "Unsupported ARM_ROTPK_LOCATION value". Stop.

Change-Id: I8592948e7de8ab0c4abbc56eb65a53eb1875a83c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

show more ...

Merge "docs: Update Mbed TLS supported version" into integration