mvebu: cp110: fix spelling in register definition

Use PF instead of PP post-fix, since it is referring to "Phase Final"
(only G3 related register had correct spelling for relevant bit).

Change-Id:

mvebu: cp110: fix spelling in register definition

Use PF instead of PP post-fix, since it is referring to "Phase Final"
(only G3 related register had correct spelling for relevant bit).

Change-Id: Ia5a9c9c78b74b15f7f8adde2c3ef4784c513da2c
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

mvebu: cp110: align all comphy_index arguments type

The biggest comphy index can be equal to 6 so there is no need to use
uint64_t for storing it.

Change-Id: I14c2b68e51678a560815963c72aed0c37068f9

mvebu: cp110: align all comphy_index arguments type

The biggest comphy index can be equal to 6 so there is no need to use
uint64_t for storing it.

Change-Id: I14c2b68e51678a560815963c72aed0c37068f926
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

plat: marvell: a80x0: reconfigure CP0 PCIE0 windows

In order to allow the use of PCIe cards such as graphics cards, whose
demands for BAR space are typically much higher than those of network
or SAT

plat: marvell: a80x0: reconfigure CP0 PCIE0 windows

In order to allow the use of PCIe cards such as graphics cards, whose
demands for BAR space are typically much higher than those of network
or SATA/USB cards, reconfigure the I/O windows so we can declare two
MMIO PCI regions: a 512 MB MMIO32 one at 0xc000_0000 and a 4 GB MMIO64
one at 0x8_0000_0000. In addition, this will leave ample room for an
ECAM config space at 0xe000_0000 (up to the ECAM maximum of 256 MB)

For compatibility with older kernels or firmware, leave the original
16 MB window in place as well.

Change-Id: Ia8177194e542078772f90941eced81b231c16887
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

plat: marvell: a70x0: reconfigure CP0 PCIE2 windows

In order to allow the use of PCIe cards such as graphics cards, whose
demands for BAR space are typically much higher than those of network
or SAT

plat: marvell: a70x0: reconfigure CP0 PCIE2 windows

In order to allow the use of PCIe cards such as graphics cards, whose
demands for BAR space are typically much higher than those of network
or SATA/USB cards, reconfigure the I/O windows so we can declare two
MMIO PCI regions: a 512 MB MMIO32 one at 0xc000_0000 and a 4 GB MMIO64
one at 0x8_0000_0000. In addition, this will leave ample room for an
ECAM config space at 0xe000_0000 (up to the ECAM maximum of 256 MB)

For compatibility with older kernels or firmware, leave the original
16 MB window in place as well.

Change-Id: I80b00691ae8d0a3f3f7285b8e0bfc21c0a095e94
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

a8k: use the memory controller feature to protect the RT service region

Define the RT service space as secure with use of memory controller
trustzone feature. Thanks to this protection, any NS-Bootl

a8k: use the memory controller feature to protect the RT service region

Define the RT service space as secure with use of memory controller
trustzone feature. Thanks to this protection, any NS-Bootloader nor NS-OS,
won't be able to access RT services (e.g. accidentally overwrite it,
which will at best result in RT services unavailability).

Change-Id: Ie5b6cbe9a1b77879d6d8f8eac5d4e41e468496ce
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

drivers: marvell: mc_trustzone: add driver for mc trustzone

Add simple driver which allows to configure the memory controller trust
zones. It is responsible for opening mc trustzone window, with
app

drivers: marvell: mc_trustzone: add driver for mc trustzone

Add simple driver which allows to configure the memory controller trust
zones. It is responsible for opening mc trustzone window, with
appropriate base address, size and attributes.

Example of usage in upcoming commits.

Change-Id: I8bea17754d31451b305040ee7de331fb8db0c63f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

show more ...

plat: marvell: rename common include file

Rename a8k_common.h to armada_common.h to keep the same header
name across all other Marvell Armada platforms.
This is especially useful since various Marve

plat: marvell: rename common include file

Rename a8k_common.h to armada_common.h to keep the same header
name across all other Marvell Armada platforms.
This is especially useful since various Marvell platforms may
use common platform files and share the driver modules.

Change-Id: I7262105201123d54ccddef9aad4097518f1e38ef
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

show more ...

docs: marvell: Update build manual

Update build manual
- remove irrelevant platforms and environemnt variables
- add links to BLE and mv_ddr Github repositories

Change-Id: Ie389c61f014751cdc0459b3f

docs: marvell: Update build manual

Update build manual
- remove irrelevant platforms and environemnt variables
- add links to BLE and mv_ddr Github repositories

Change-Id: Ie389c61f014751cdc0459b3f78c70ede694d27b8
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

show more ...

ti: k3: common: Add basic PSCI core off support

Use TI-SCI messages to request core power down from system controller
firmware.

Signed-off-by: Andrew F. Davis <afd@ti.com>

opteed: pass power level on suspend

Some platforms might chose to take different actions depending on this
value; this is precisely the case for rcar-gen3.

Signed-off-by: Jorge Ramirez-Ortiz <jrami

opteed: pass power level on suspend

Some platforms might chose to take different actions depending on this
value; this is precisely the case for rcar-gen3.

Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com>

show more ...

Merge pull request #1552 from glneo/build-fix

GIC: Fix build error

Merge pull request #1547 from semihalf-dabros-jan/semihalf-dabros-jan/fix_errmisc

AARCH64: Fix credentials for ERXMISC0_EL1 and ERXMISC1_EL1

Merge pull request #1550 from danielboulby-arm/db/weakdefs

Prevent two weak definitions of the same function

Merge pull request #1549 from danielboulby-arm/db/pointer

Remove rt_svc_descs pointer from global scope

GIC: Fix build error

Pointers should be comparied to NULL.

Fixes: 3fea9c8b8e8e ("gic: Fix types")
Signed-off-by: Andrew F. Davis <afd@ti.com>

Prevent two weak definitions of the same function

Add another level of abstraction of weak defs for
arm_bl2_handle_post_image_load to prevent two weak definitions
of the same function

Change-Id: Ie

Prevent two weak definitions of the same function

Add another level of abstraction of weak defs for
arm_bl2_handle_post_image_load to prevent two weak definitions
of the same function

Change-Id: Ie953786f43b0f88257c82956ffaa5fe0d19603db
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

show more ...

Remove rt_svc_descs pointer from global scope

A pointer to rt_svc_desc_t is defined both in the function
handle_runtime_svc() and globally. Since the value of the
pointer RT_SVC_DESCS_START is defin

Remove rt_svc_descs pointer from global scope

A pointer to rt_svc_desc_t is defined both in the function
handle_runtime_svc() and globally. Since the value of the
pointer RT_SVC_DESCS_START is defined by the linker and
never changes make this definition local in both
handle_runtime_svc() and runtime_svc_init() to reduce the
number of loads

Change-Id: Iea42c778d8599a26c87700009163b5a8d7d60be2
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

show more ...

drivers: imx: crash-console: Add a mxc_crash_console driver

This patch does two main things

- It implements the crash console UART init in assembly, as a
hard-coded 115200 8N1 assumed from the 24

drivers: imx: crash-console: Add a mxc_crash_console driver

This patch does two main things

- It implements the crash console UART init in assembly, as a
hard-coded 115200 8N1 assumed from the 24 MHz clock.

If the clock setup code has not run yet, this code can't work but,
setting up clocks and clock-gates is way out of scope for this type of
recovery function.

- It adds code to write a character out of the NXP UART without using any
stack-based operations when doing so.

- Provides support for crash console in DCE or DTE mode.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

show more ...

drivers: imx: uart: Add mxc_console

- Adds a simple register read/write abstraction to cut-down on the
amount of typing and text required to access UART registers in this driver.

- Adds a console

drivers: imx: uart: Add mxc_console

- Adds a simple register read/write abstraction to cut-down on the
amount of typing and text required to access UART registers in this driver.

- Adds a console getc() callback.

- Adds a console putc() callback, translating '\n' to '\r' + '\n'.

- Initializes the MXC UART, take a crude method of calculating the
BAUD rate generator. The UART clock-gates must have been enabled prior
to launching the UART init code.
Special care needs to be taken to ensure the UBIR is initialized before the
UBMR and we need to ensure that UCR2.SRST comes good before trying to
program other registers associated with the UART.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

show more ...

Merge pull request #1546 from antonio-nino-diaz-arm/an/log-misra

Fix some MISRA defect in log helpers

Fix MISRA defects in log helpers

No functional changes.

Change-Id: I850f08718abb69d5d58856b0e3de036266d8c2f4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

libc: Fix some MISRA defects

No functional changes.

Change-Id: I907aa47565af2a6c435a5560041fd2b59e65c25c
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1542 from antonio-nino-diaz-arm/an/bl31-misra

Some MISRA fixes in BL31, cci and smmu

Merge pull request #1544 from jwerner-chromium/JW_handle_ea

context_mgmt: Fix HANDLE_EA_EL3_FIRST implementation

Merge pull request #1539 from antonio-nino-diaz-arm/an/gic-misra

MISRA fixes for the GIC driver