allwinner: Remove unused include path

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ia2f69e26e34462e113bc2cad4dcb923e20b8fb95

allwinner: Move the NOBITS region to SRAM A1

This frees up space in SRAM A2 that will be used by the SCP firmware and
SCPI shared memory.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-

allwinner: Move the NOBITS region to SRAM A1

This frees up space in SRAM A2 that will be used by the SCP firmware and
SCPI shared memory.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I8ce035257451e2d142666fe0cd045e59d4d57b35

show more ...

uniphier: run BL33 at EL2

All the SoCs in 64-bit UniPhier SoC family support EL2.

Just hard-code MODE_EL2 instead of using el_implemented() helper.

Change-Id: I7ab48002c5205bc8c013e1b46313b57d6c43

uniphier: run BL33 at EL2

All the SoCs in 64-bit UniPhier SoC family support EL2.

Just hard-code MODE_EL2 instead of using el_implemented() helper.

Change-Id: I7ab48002c5205bc8c013e1b46313b57d6c431db0
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

mediatek: mt8183: add Vmodem/Vcore DVS init level

spm resume will restore Vmodem/Vcore voltages
back based on the SPM_DVS_LEVEL.

Change-Id: I37ff7ce4ba62219c1858acea816c5bc9ce6c493e
Signed-off-by:

mediatek: mt8183: add Vmodem/Vcore DVS init level

spm resume will restore Vmodem/Vcore voltages
back based on the SPM_DVS_LEVEL.

Change-Id: I37ff7ce4ba62219c1858acea816c5bc9ce6c493e
Signed-off-by: Roger Lu <roger.lu@mediatek.com>

show more ...

uniphier: call uniphier_scp_is_running() only when on-chip STM is supported

uniphier_scp_is_running() reads the UNIPHIER_STMBE2COM register,
but it does not exist on all SoCs.

Do not call this func

uniphier: call uniphier_scp_is_running() only when on-chip STM is supported

uniphier_scp_is_running() reads the UNIPHIER_STMBE2COM register,
but it does not exist on all SoCs.

Do not call this function if the on-chip SCP is not supported.

Change-Id: I7c71ca0735e3a8e095c3f22ba6165f82a2986362
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge "debugfs: add SMC channel" into integration

spm-mm: Remove mm_svc.h header

The contents of this header have been merged into the spm_mm_svc.h
header file.

Change-Id: I01530b2e4ec1b4c091ce339758025e2216e740a4
Signed-off-by: Paul Beesley <paul

spm-mm: Remove mm_svc.h header

The contents of this header have been merged into the spm_mm_svc.h
header file.

Change-Id: I01530b2e4ec1b4c091ce339758025e2216e740a4
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

show more ...

spm-mm: Refactor spm_svc.h and its contents

Change-Id: I91c192924433226b54d33e57d56d146c1c6df81b
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

spm-mm: Refactor secure_partition.h and its contents

Before adding any new SPM-related components we should first do
some cleanup around the existing SPM-MM implementation. The aim
is to make sure t

spm-mm: Refactor secure_partition.h and its contents

Before adding any new SPM-related components we should first do
some cleanup around the existing SPM-MM implementation. The aim
is to make sure that any SPM-MM components have names that clearly
indicate that they are MM-related. Otherwise, when adding new SPM
code, it could quickly become confusing as it would be unclear to
which component the code belongs.

The secure_partition.h header is a clear example of this, as the
name is generic so it could easily apply to any SPM-related code,
when it is in fact SPM-MM specific.

This patch renames the file and the two structures defined within
it, and then modifies any references in files that use the header.

Change-Id: I44bd95fab774c358178b3e81262a16da500fda26
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

show more ...

spm: Remove SPM Alpha 1 prototype and support files

The Secure Partition Manager (SPM) prototype implementation is
being removed. This is preparatory work for putting in place a
dispatcher component

spm: Remove SPM Alpha 1 prototype and support files

The Secure Partition Manager (SPM) prototype implementation is
being removed. This is preparatory work for putting in place a
dispatcher component that, in turn, enables partition managers
at S-EL2 / S-EL1.

This patch removes:

- The core service files (std_svc/spm)
- The Resource Descriptor headers (include/services)
- SPRT protocol support and service definitions
- SPCI protocol support and service definitions

Change-Id: Iaade6f6422eaf9a71187b1e2a4dffd7fb8766426
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>

show more ...

Remove dependency between SPM_MM and ENABLE_SPM build flags

There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the oth

Remove dependency between SPM_MM and ENABLE_SPM build flags

There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the other is based on the Secure Partition Client Interface
(SPCI) specification. Currently there is a dependency between their
build flags that shouldn't exist, making further development
harder than it should be. This patch removes that
dependency, making the two flags function independently.

Before: ENABLE_SPM=1 is required for using either implementation.
By default, the SPCI-based implementation is enabled and
this is overridden if SPM_MM=1.

After: ENABLE_SPM=1 enables the SPCI-based implementation.
SPM_MM=1 enables the MM-based implementation.
The two build flags are mutually exclusive.

Note that the name of the ENABLE_SPM flag remains a bit
ambiguous - this will be improved in a subsequent patch. For this
patch the intention was to leave the name as-is so that it is
easier to track the changes that were made.

Change-Id: I8e64ee545d811c7000f27e8dc8ebb977d670608a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

show more ...

Merge changes from topic "bs/pmf32" into integration

* changes:
pmf: Make the runtime instrumentation work on AArch32
SiP: Don't validate entrypoint if state switch is impossible

Merge changes from topic "tegra-boot-fixes-121719" into integration

* changes:
Tegra: prepare boot parameters for Trusty
Tegra: per-CPU GIC CPU interface init

Merge changes from topic "mailbox-fixes" into integration

* changes:
intel: Fix SMC SIP service
intel: Introduce mailbox response length handling
intel: Fix mailbox config return status
inte

Merge changes from topic "mailbox-fixes" into integration

* changes:
intel: Fix SMC SIP service
intel: Introduce mailbox response length handling
intel: Fix mailbox config return status
intel: Mailbox driver logic fixes
plat: intel: Fix FPGA manager on reconfiguration
plat: intel: Fix mailbox send_cmd issue
intel: Modify mailbox's get_config_status

show more ...

Merge "TF-A: Fix BL2 bug in dynamic configuration initialisation" into integration

TF-A: Fix BL2 bug in dynamic configuration initialisation

This patch fixes the bug in BL2 dynamic configuration initialisation
which prevents loading NT_FW_CONFIG image (ref. GENFW-3471).
It also ad

TF-A: Fix BL2 bug in dynamic configuration initialisation

This patch fixes the bug in BL2 dynamic configuration initialisation
which prevents loading NT_FW_CONFIG image (ref. GENFW-3471).
It also adds parentheses around 'if' statement conditions to fix
Coverity defect.

Change-Id: I353566c29b84341887e13bf8098a4fedfc4e00ff
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Merge "intel: Create SiP service header file" into integration

Tegra: prepare boot parameters for Trusty

This patch saves the boot parameters provided by the previous bootloader
during cold boot and passes them to Trusty. Commit 06ff251ec introduced
the plat_tr

Tegra: prepare boot parameters for Trusty

This patch saves the boot parameters provided by the previous bootloader
during cold boot and passes them to Trusty. Commit 06ff251ec introduced
the plat_trusty_set_boot_args() handler, but did not consider the boot
parameters passed by the previous bootloader. This patch fixes that
anomaly.

Change-Id: Ib40dcd02b67c94cea5cefce09edb0be4a998db37
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Merge changes from topic "nonbl2-boot" into integration

* changes:
intel: stratix10: Modify BL31 parameter handling
intel: Modify BL31 address mapping
intel: stratix10: Enable uboot entrypoint

Merge changes from topic "nonbl2-boot" into integration

* changes:
intel: stratix10: Modify BL31 parameter handling
intel: Modify BL31 address mapping
intel: stratix10: Enable uboot entrypoint support

show more ...

debugfs: add SMC channel

Provide an SMC interface to the 9p filesystem. This permits
accessing firmware drivers through a common interface, using
standardized read/write/control operations.

Signed-

debugfs: add SMC channel

Provide an SMC interface to the 9p filesystem. This permits
accessing firmware drivers through a common interface, using
standardized read/write/control operations.

Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I9314662314bb060f6bc02714476574da158b2a7d

show more ...

Tegra: per-CPU GIC CPU interface init

This patch enables per-CPU GIC CPU interfaces during CPU
power on. The previous code initialized the distributor
for all CPUs, which was not required.

Signed-o

Tegra: per-CPU GIC CPU interface init

This patch enables per-CPU GIC CPU interfaces during CPU
power on. The previous code initialized the distributor
for all CPUs, which was not required.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ifd957b2367da06405b4c3e2225411adbaec35bb8

show more ...

Merge changes from topic "allwinner_pmic" into integration

* changes:
allwinner: h6: power: Switch to using the AXP driver
drivers: allwinner: axp: Add AXP805 support

Merge "arm: gicv3: Fix compiler dependent behavior" into integration

Merge "plat/rockchip: enable power domains of rk3399 before reset" into integration

Merge "plat/rockchip: cliam a macro to enable hdcp feature for DP" into integration