Merge changes from topic "css_refactor_arm" into integration

* changes:
refactor(console): consolidate console runtime switch
refactor(synquacer): console runtime switch on bl31 exit
refactor(

Merge changes from topic "css_refactor_arm" into integration

* changes:
refactor(console): consolidate console runtime switch
refactor(synquacer): console runtime switch on bl31 exit
refactor(nxp): console runtime switch on bl31 exit
refactor(nvidia): console runtime switch on bl31 exit
refactor(hisilicon): console runtime switch on bl31 exit
refactor(xilinx): console runtime switch on bl31 exit
refactor(mediatek): console runtime switch on bl31 exit
refactor(armada): console runtime switch on bl31 exit
refactor(imx): console runtime switch on bl31 exit
refactor(brcm): console runtime switch on bl31 exit

show more ...

refactor(console): consolidate console runtime switch

Refactor console_flush() and console_switch_state(CONSOLE_FLAG_RUNTIME)
to bl31_main(). This has been done per the recommendation in TF-A
mailin

refactor(console): consolidate console runtime switch

Refactor console_flush() and console_switch_state(CONSOLE_FLAG_RUNTIME)
to bl31_main(). This has been done per the recommendation in TF-A
mailing list. These calls need to be the last calls, after any runtime
initialization has been done, before BL31 exits.

All platforms that override the generic implementation of
bl31_plat_runtime_setup() have been refactored. The console_flush()
and console_switch_state() calls have been removed as they become
part of bl31_main() function.

Any platform that don't need to make any change to the generic (weak)
implementation of bl31_plat_runtime_setup() don't need to override it
in their platforms.

Change-Id: I6d04d6daa9353daeaa7e3df9e9adf6f322a917b8
Signed-off-by: Salman Nabi <salman.nabi@arm.com>

show more ...

refactor(synquacer): console runtime switch on bl31 exit

TF-A plans to move the console_flush() and
console_switch_state(CONOSLE_FLAG_RUNTIME) calls to bl31_main() just
before BL31 exits.

For now w

refactor(synquacer): console runtime switch on bl31 exit

TF-A plans to move the console_flush() and
console_switch_state(CONOSLE_FLAG_RUNTIME) calls to bl31_main() just
before BL31 exits.

For now we are mimicking the generic implementation by calling flush
and changing the console state to runtime at the end of
bl31_plat_runtime_setup() for each platform. This is so that each
platform can test it prior to moving flush and switch to bl31_main().

This patch affects the synquacer SoC of the socionext platform.

Change-Id: I85a251e3d9732c5fb5010c3c8bb7323c4f57fa96
Signed-off-by: Salman Nabi <salman.nabi@arm.com>

show more ...

Merge changes from topic "HEAD" into integration

* changes:
feat(synquacer): add FWU Multi Bank Update support
feat(synquacer): add TBBR support
feat(synquacer): add BL2 support
refactor(syn

Merge changes from topic "HEAD" into integration

* changes:
feat(synquacer): add FWU Multi Bank Update support
feat(synquacer): add TBBR support
feat(synquacer): add BL2 support
refactor(synquacer): move common source files

show more ...

feat(synquacer): add BL2 support

Add BL2 support by default. Move the legacy mode behind the
RESET_TO_BL31 define.

Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Masahisa Kojima <masahisa.kojima@linaro

feat(synquacer): add BL2 support

Add BL2 support by default. Move the legacy mode behind the
RESET_TO_BL31 define.

Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Masahisa Kojima <masahisa.kojima@linaro.org>
Cc: Manish V Badarkhe <manish.badarkhe@arm.com>
Cc: Leonardo Sandoval <leonardo.sandoval@linaro.org>
Change-Id: Ic490745a7e8f6114172733428ebd6bd6adfcc1ec
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

show more ...

Merge "fix(plat/socionext/synquacer): initialise CNTFRQ in Non Secure CNTBaseN" into integration

fix(plat/socionext/synquacer): initialise CNTFRQ in Non Secure CNTBaseN

The GTimer implemented on SynQuacer has similar issue found on Juno
wherein CNTBaseN.CNTFRQ can be written but does not reflec

fix(plat/socionext/synquacer): initialise CNTFRQ in Non Secure CNTBaseN

The GTimer implemented on SynQuacer has similar issue found on Juno
wherein CNTBaseN.CNTFRQ can be written but does not reflect the value
of the CNTFRQ register in CNTCTLBase frame. This doesn't follow ARM ARM
in that the value updated in CNTCTLBase.CNTFRQ is not reflected
in CNTBaseN.CNTFRQ.

Hence enable the workaround (applied to Juno) for SynQuacer that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I5204fb57f28c0945812814f008c4905ef0882e2b

show more ...

Merge "pl011: Use generic console_t data structure" into integration

pl011: Use generic console_t data structure

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data stru

pl011: Use generic console_t data structure

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: I7a23327394d142af4b293ea7ccd90b843c54587c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge changes from topic "spm-devel" into integration

* changes:
spm-mm: Rename aarch64 assembly files
spm-mm: Rename source files
spm-mm: Rename spm_shim_private.h
spm-mm: Rename spm_privat

Merge changes from topic "spm-devel" into integration

* changes:
spm-mm: Rename aarch64 assembly files
spm-mm: Rename source files
spm-mm: Rename spm_shim_private.h
spm-mm: Rename spm_private.h
spm-mm: Rename component makefile
spm-mm: Remove mm_svc.h header
spm-mm: Refactor spm_svc.h and its contents
spm-mm: Refactor secure_partition.h and its contents
spm: Remove SPM Alpha 1 prototype and support files
Remove dependency between SPM_MM and ENABLE_SPM build flags

show more ...

Remove dependency between SPM_MM and ENABLE_SPM build flags

There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the oth

Remove dependency between SPM_MM and ENABLE_SPM build flags

There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the other is based on the Secure Partition Client Interface
(SPCI) specification. Currently there is a dependency between their
build flags that shouldn't exist, making further development
harder than it should be. This patch removes that
dependency, making the two flags function independently.

Before: ENABLE_SPM=1 is required for using either implementation.
By default, the SPCI-based implementation is enabled and
this is overridden if SPM_MM=1.

After: ENABLE_SPM=1 enables the SPCI-based implementation.
SPM_MM=1 enables the MM-based implementation.
The two build flags are mutually exclusive.

Note that the name of the ENABLE_SPM flag remains a bit
ambiguous - this will be improved in a subsequent patch. For this
patch the intention was to leave the name as-is so that it is
easier to track the changes that were made.

Change-Id: I8e64ee545d811c7000f27e8dc8ebb977d670608a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

show more ...

Merge pull request #1856 from masahisak/synquacer-scmi-support

plat/synquacer: enable SCMI support

plat/synquacer: enable SCMI support

Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific

plat/synquacer: enable SCMI support

Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific protocol(0x80).
This vendor specific protocol is used to get the dram mapping information
from SCP.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

show more ...

Merge pull request #1770 from antonio-nino-diaz-arm/an/spm-mm

Undeprecate MM-based SPM

SPM: Rename SPM_DEPRECATED flag to SPM_MM

The SPM implementation based on MM is going to be kept for the
foreseeable future.

Change-Id: I11e96778a4f52a1aa803e7e048d9a7cb24a53954
Signed-off-by: Anto

SPM: Rename SPM_DEPRECATED flag to SPM_MM

The SPM implementation based on MM is going to be kept for the
foreseeable future.

Change-Id: I11e96778a4f52a1aa803e7e048d9a7cb24a53954
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>

show more ...

Merge pull request #1738 from ardbiesheuvel/synquacer-spm

synquacer: add SPM support

plat/synquacer: enable SPM support

Enable the deprecated SPM framework for the SynQuacer platform.
It involves creating a memory layout in secure DRAM, and wiring
up the SPM infrastructure so that t

plat/synquacer: enable SPM support

Enable the deprecated SPM framework for the SynQuacer platform.
It involves creating a memory layout in secure DRAM, and wiring
up the SPM infrastructure so that the secure partition payload
that is loaded into this region by the SCP firmware is dispatched
appropriately.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

show more ...

plat/synquacer: enable OP-TEE logic only if SPD_opteed is set

The logic that initializes the BL32 entry point data structure
should only be executed if we are in fact loading OP-TEE, and
not if BL32

plat/synquacer: enable OP-TEE logic only if SPD_opteed is set

The logic that initializes the BL32 entry point data structure
should only be executed if we are in fact loading OP-TEE, and
not if BL32_BASE is set for other reasons (i.e., when enabling
SPM)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1587 from antonio-nino-diaz-arm/an/deprecated

Remove deprecated interfaces for all platforms

synquacer: Migrate to new interfaces

- Remove references to removed build options.
- Update Makefile paths.
- Migrate to bl31_early_platform_setup2().

Change-Id: I51cbf09a0297ac1ee645a959063238c9d5

synquacer: Migrate to new interfaces

- Remove references to removed build options.
- Update Makefile paths.
- Migrate to bl31_early_platform_setup2().

Change-Id: I51cbf09a0297ac1ee645a959063238c9d556d8e1
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1542 from antonio-nino-diaz-arm/an/bl31-misra

Some MISRA fixes in BL31, cci and smmu

Fix MISRA defects in BL31 common code

Change-Id: I5993b425445ee794e6d2a792c244c0af53640655
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1488 from b49020/integration

synquacer: Enable optional OP-TEE support