Merge "feat(rockchip): add RK3566/RK3568 Socs support" into integration

feat(rockchip): add RK3566/RK3568 Socs support

RK3566/RK3568 is a Quad-core soc and Cortex-a55 inside.
This patch supports the following functions:
1. basic platform setup
2. power up/off cpus
3. su

feat(rockchip): add RK3566/RK3568 Socs support

RK3566/RK3568 is a Quad-core soc and Cortex-a55 inside.
This patch supports the following functions:
1. basic platform setup
2. power up/off cpus
3. suspend/resume cpus
4. suspend/resume system
5. reset system

Signed-off-by: shengfei Xu <xsf@rock-chips.com>
Change-Id: I8b98a4d07664de26bd6078f63664cbc3d9c1c68c

show more ...

Merge changes I1bfa797e,I0ec7a70e into integration

* changes:
fix(tree): correct some typos
fix(rockchip): use semicolon instead of comma

fix(tree): correct some typos

found using codespell (https://github.com/codespell-project/codespell).

Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I1bfa797e3460adddeefa916bb68e22beddaf6

fix(tree): correct some typos

found using codespell (https://github.com/codespell-project/codespell).

Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I1bfa797e3460adddeefa916bb68e22beddaf6373

show more ...

Merge changes from topic "console_t_cleanup" into integration

* changes:
marvell: Consolidate console register calls
uniphier: Use generic console_t data structure
spe: Use generic console_t d

Merge changes from topic "console_t_cleanup" into integration

* changes:
marvell: Consolidate console register calls
uniphier: Use generic console_t data structure
spe: Use generic console_t data structure
LS 16550: Use generic console_t data structure
stm32: Use generic console_t data structure
rcar: Use generic console_t data structure
a3700: Use generic console_t data structure
16550: Use generic console_t data structure
imx: Use generic console_t data structure

show more ...

16550: Use generic console_t data structure

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data stru

16550: Use generic console_t data structure

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: I5c2fe3b6a667acf80c808cfec4a64059a2c9c25f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge changes from topic "rockchip-uart-fixes" into integration

* changes:
rockchip: rk3399: store actual debug uart information on suspend
rockchip: move dt-coreboot uart distinction into param

Merge changes from topic "rockchip-uart-fixes" into integration

* changes:
rockchip: rk3399: store actual debug uart information on suspend
rockchip: move dt-coreboot uart distinction into param handling code
rockchip: make uart baudrate configurable
rockchip: px30: add uart5 as option for serial output

show more ...

rockchip: move dt-coreboot uart distinction into param handling code

Rockchip platforms can be booted from either u-boot or coreboot.

So far the Coreboot-console was initizalized from a coreboot da

rockchip: move dt-coreboot uart distinction into param handling code

Rockchip platforms can be booted from either u-boot or coreboot.

So far the Coreboot-console was initizalized from a coreboot data struct
in the early_param2 callbacks and dt-based consoles with data from the
rockchip_get_uart_* functions.

But later code may also need this console information for example for
special suspend handling. To make this easy follow a suggestion from
Julius Werner and move the coreboot<->dt distinction into the
rockchip_get_uart_* functions, thus making correct data about the used
uart available to all Rockchip platform code at all times.

This includes a new rockchip_get_uart_clock as well, because while the
dt-platforms right now always just default the rate defined in a constant
Coreboot provides its own field for the clock rate and we don't want to
loose that information for the console init. Similarly the rk_uart_*
variables should move into the non-Coreboot code, to prevent them from
being marked as unused, which also requires the rk_get_uart_* functions
to move below the actual dt-parsing.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I278d595d2aa6c6864187fc8979a9fbff9814feac

show more ...

rockchip: make uart baudrate configurable

A previous patch already allowed to configure the uart output from the
devicetree, but on Rockchip platforms we also have the issue of different
vendors usi

rockchip: make uart baudrate configurable

A previous patch already allowed to configure the uart output from the
devicetree, but on Rockchip platforms we also have the issue of different
vendors using different baudrates for their uarts.

For example, rk3399 has a default baudrate of 115200 which is true for
ChromeOS-devices and boards from Theobroma-Systems, while all the boards
using the vendor boot chain actually use a baudrate of 1500000.

Similarly the newly added px30 has a default of said 1500000 but some
boards may want to use the more widely used 115200.

The devicetree stdout-path node already contains the desired baudrate,
so add simple code to parse it from there and override the default,
which stays unchanged.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I7412139c3df3073a1996eb508ec08642ec6af90d

show more ...

Merge changes I0d17ba6c,I540741d2,I9e6475ad,Ifd769320,I12c04a85, ... into integration

* changes:
plat/mediatek/mt81*: Use new bl31_params_parse() helper
plat/rockchip: Use new bl31_params_parse_

Merge changes I0d17ba6c,I540741d2,I9e6475ad,Ifd769320,I12c04a85, ... into integration

* changes:
plat/mediatek/mt81*: Use new bl31_params_parse() helper
plat/rockchip: Use new bl31_params_parse_helper()
Add helper to parse BL31 parameters (both versions)
Factor out cross-BL API into export headers suitable for 3rd party code
Use explicit-width data types in AAPCS parameter structs
plat/rockchip: Switch to use new common BL aux parameter library
Introduce lightweight BL platform parameter library

show more ...

plat/rockchip: Use new bl31_params_parse_helper()

The Rockchip platform is a prime candidate for switching to the new
bl31_params_parse_helper(), so switch it over. This will allow BL2
implementatio

plat/rockchip: Use new bl31_params_parse_helper()

The Rockchip platform is a prime candidate for switching to the new
bl31_params_parse_helper(), so switch it over. This will allow BL2
implementations on this platform to transparently switch over to the
version 2 parameter structure.

Change-Id: I540741d2425c93f66c8697ce749a351eb2b3a7e8
Signed-off-by: Julius Werner <jwerner@chromium.org>

show more ...

plat/rockchip: Switch to use new common BL aux parameter library

This patch changes all Rockchip platforms to use the new common BL aux
parameter helpers. Since the parameter space is now cleanly sp

plat/rockchip: Switch to use new common BL aux parameter library

This patch changes all Rockchip platforms to use the new common BL aux
parameter helpers. Since the parameter space is now cleanly split in
generic and vendor-specific parameters and the COREBOOT_TABLE
parameter is now generic, the parameter type number for that parameter
has to change. Since it only affects coreboot which always builds TF as
a submodule and includes its headers directly to get these constants,
this should not cause any issues. In general, after this point, we
should avoid changing already assigned parameter type numbers whenever
possible.

Change-Id: Ic99ddd1e91ff5e5fe212fa30c793a0b8394c9dad
Signed-off-by: Julius Werner <jwerner@chromium.org>

show more ...

Merge "rockchip: drop rockchip-specific imported linker symbols for bl31" into integration

rockchip: drop rockchip-specific imported linker symbols for bl31

In the rockchip bl31 setup the __RO_START__ and __RO_END__ symbols are
currently imported into special BL31_RO_* constants while the

rockchip: drop rockchip-specific imported linker symbols for bl31

In the rockchip bl31 setup the __RO_START__ and __RO_END__ symbols are
currently imported into special BL31_RO_* constants while the general
code also imports them as BL_CODE_BASE and BL_CODE_END.

So we can just use the general symbols and can drop the duplication.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: Ibf1b48ad80bed897247a1690a32711030479262d

show more ...

Merge changes from topic "rk3399q7" into integration

* changes:
rockchip: Allow console device to be set by DTB.
rockchip: Add params_setup to RK3328.
rockchip: Streamline and complete UARTn_B

Merge changes from topic "rk3399q7" into integration

* changes:
rockchip: Allow console device to be set by DTB.
rockchip: Add params_setup to RK3328.
rockchip: Streamline and complete UARTn_BASE macros.

show more ...

rockchip: Allow console device to be set by DTB.

Currently the compile-time constant PLAT_RK_UART_BASE defines
which UART is used as console device. E.g. on RK3399 it is set
to UART2. That means, th

rockchip: Allow console device to be set by DTB.

Currently the compile-time constant PLAT_RK_UART_BASE defines
which UART is used as console device. E.g. on RK3399 it is set
to UART2. That means, that a single bl31 image can not be used
for two boards, which just differ on the UART console.

This patch addresses this limitation by parsing the "stdout-path"
property from the "chosen" node in the DTB. The expected property
string is expected to have the form "serialN:XXX", with
N being either 0, 1, 2, 3 or 4. When the property is found, it will
be used to override PLAT_RK_UART_BASE.

Tested on RK3399-Q7, with a stdout-path of "serial0:115200n8".

Signed-off-by: Christoph Müllner <christophm30@gmail.com>
Change-Id: Iafe1320e77ab006c121f8d52745d54cef68a48c7

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1621 from jts-arm/typos

Various corrections of typos

Replace S-EL3 references by EL3

The "Secure" prefix (S-ELx) is valid only for S-EL0 and S-EL1 but is
meaningless for EL3, since EL3 is always secure. Hence, the "S" prefix
has been removed from wher

Replace S-EL3 references by EL3

The "Secure" prefix (S-ELx) is valid only for S-EL0 and S-EL1 but is
meaningless for EL3, since EL3 is always secure. Hence, the "S" prefix
has been removed from wherever it was used as "S-EL3".

Change-Id: Icdeac9506d763f9f83d7297c7113aec7b85e9dbe
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

show more ...

Merge pull request #1587 from antonio-nino-diaz-arm/an/deprecated

Remove deprecated interfaces for all platforms

rockchip: Migrate to new interfaces

- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Use bl31_warm_entrypoint() instead of psci_entrypoint().
- Use PLAT_VIRT_ADDR_SPACE_

rockchip: Migrate to new interfaces

- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Use bl31_warm_entrypoint() instead of psci_entrypoint().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Update Makefile paths.
- Remove references to removed build options.
- Use private definition of bl31_params_t.

Change-Id: I860341594b5c868b2fcaa59d23957ee718472ef1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1335 from JoelHutton/jh/cleanup_void_pointers

Clean usage of void pointers to access symbols

Clean usage of void pointers to access symbols

Void pointers have been used to access linker symbols, by declaring an
extern pointer, then taking the address of it. This limits symbols
values to ali

Clean usage of void pointers to access symbols

Void pointers have been used to access linker symbols, by declaring an
extern pointer, then taking the address of it. This limits symbols
values to aligned pointer values. To remove this restriction an
IMPORT_SYM macro has been introduced, which declares it as a char
pointer and casts it to the required type.

Change-Id: I89877fc3b13ed311817bb8ba79d4872b89bfd3b0
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

show more ...

Merge pull request #1193 from jwerner-chromium/JW_coreboot

New console API and coreboot support [v4]