Merge changes from topic "s32g274a/sd_support" into integration

* changes:
feat(s32g274a): move fip in a dedicated partition
feat(s32g274ardb): initialize the IO buffer
feat(s32g274ardb): init

Merge changes from topic "s32g274a/sd_support" into integration

* changes:
feat(s32g274a): move fip in a dedicated partition
feat(s32g274ardb): initialize the IO buffer
feat(s32g274ardb): initialize the uSDHC driver
feat(s32g274ardb): set the system counter rate
feat(s32g274ardb): init the generic timer for BL2
fix(nxp-mmc): handle response for CMD0
refactor(mmc): replace 0 with MMC_RESPONSE_NONE
feat(mmc): add define for no response

show more ...

feat(s32g274a): move fip in a dedicated partition

Modify the deployment method for TF-A binaries on the SD card. To
simplify deployment, BL2 will be decorated with an IVT, making it a
bootable image

feat(s32g274a): move fip in a dedicated partition

Modify the deployment method for TF-A binaries on the SD card. To
simplify deployment, BL2 will be decorated with an IVT, making it a
bootable image, while fip.bin will be deployed as a raw MBR partition on
the SD card. This approach allows the FIP location to be auto-discovered
based on information found in the MBR. The partition ID where the image
is stored is set to partition zero but can be changed using the FIP_PART
makefile parameter. The GPT header cannot be used instead of MBR due to
the boot header on the S32G274A, which may overlap with the GPT reserved
area.

Change-Id: I26746023dba7788613a74ae69c86124b450e6bdb
Co-developed-by: Bogdan Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Bogdan Roman <bogdan-gabriel.roman@nxp.com>
Co-developed-by: Khristine Andreea Barbulescu <khristineandreea.barbulescu@nxp.com>
Signed-off-by: Khristine Andreea Barbulescu <khristineandreea.barbulescu@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

feat(s32g274ardb): initialize the IO buffer

Define and initialize the IO buffer that will be used by the uSDHC
driver to load images from the SD card.

Change-Id: I8d9712b1243a58fd6830f2682edbb9e661

feat(s32g274ardb): initialize the IO buffer

Define and initialize the IO buffer that will be used by the uSDHC
driver to load images from the SD card.

Change-Id: I8d9712b1243a58fd6830f2682edbb9e661d2f6b5
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

feat(s32g274ardb): initialize the uSDHC driver

S32G2 and IMX share the same uSDHC controller. Therefore, it is
initialized during BL2 to facilitate the loading of subsequent boot
stages.

Change-Id:

feat(s32g274ardb): initialize the uSDHC driver

S32G2 and IMX share the same uSDHC controller. Therefore, it is
initialized during BL2 to facilitate the loading of subsequent boot
stages.

Change-Id: I223904c24a14a89ef676626b54a5937f39a17eda
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

Merge changes from topic "nxp-s32g274a/enable-mmu" into integration

* changes:
feat(s32g274a): split early clock initialization
feat(s32g274a): enable MMU for BL31 stage
feat(s32g274a): dynami

Merge changes from topic "nxp-s32g274a/enable-mmu" into integration

* changes:
feat(s32g274a): split early clock initialization
feat(s32g274a): enable MMU for BL31 stage
feat(s32g274a): dynamically map GIC regions
feat(s32g274a): enable MMU for BL2 stage
feat(s32g274a): dynamically map siul2 and fip img
feat(s32g274a): map each image before its loading
feat(nxp-clk): dynamic map of the clock modules
feat(s32g274a): increase the number of MMU regions
feat(s32g274a): add console mapping

show more ...

feat(s32g274a): increase the number of MMU regions

Increase the maximum number of regions allocated by the translation
table library to accommodate the entries added in the next commits.

Change-Id:

feat(s32g274a): increase the number of MMU regions

Increase the maximum number of regions allocated by the translation
table library to accommodate the entries added in the next commits.

Change-Id: Ib0dd2d0dbc9b4a574367141a7c96d76dd08e2c7f
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

Merge changes from topic "nxp-drivers/add-linflex-clk" into integration

* changes:
feat(nxp-clk): enable UART clock
feat(nxp-clk): add PERIPH PLL enablement

feat(nxp-clk): enable UART clock

Before this change, the internal oscillator clocked the UART with a
frequency of 48MHz. With the necessary support added, the UART clock
rate is increased to 125MHz

feat(nxp-clk): enable UART clock

Before this change, the internal oscillator clocked the UART with a
frequency of 48MHz. With the necessary support added, the UART clock
rate is increased to 125MHz by changing the clock source from FIRC to
PERIPH PLL PHI3.

Change-Id: I3160dc6860ebf441c9bea8eaf9d8d12de48bd647
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

Merge changes from topic "add_s32g274ardb2_support" into integration

* changes:
feat(s32g274a): enable BL31 stage
feat(s32g274a): add S32G274ARDB2 board support
feat(nxp-drivers): add Linflex

Merge changes from topic "add_s32g274ardb2_support" into integration

* changes:
feat(s32g274a): enable BL31 stage
feat(s32g274a): add S32G274ARDB2 board support
feat(nxp-drivers): add Linflex driver

show more ...

feat(s32g274a): enable BL31 stage

Add BL31 prerequisites for the S32G274ARDB2 board to allow single-core
cold boot without MMU and PSCI services.

Change-Id: I8a10fd62f3cc9430083758043ea82e3803f6106

feat(s32g274a): enable BL31 stage

Add BL31 prerequisites for the S32G274ARDB2 board to allow single-core
cold boot without MMU and PSCI services.

Change-Id: I8a10fd62f3cc9430083758043ea82e3803f61060
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Bogdan Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Andra-Teodora Ilie <andra.ilie@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...

feat(s32g274a): add S32G274ARDB2 board support

S32G274ARDB2 is a development board to showcase the capabilities of the
S32G2 SoC. It includes 4 ARM Cortex-A53 cores running at 1.0GHz, 4GBs
of DDR, a

feat(s32g274a): add S32G274ARDB2 board support

S32G274ARDB2 is a development board to showcase the capabilities of the
S32G2 SoC. It includes 4 ARM Cortex-A53 cores running at 1.0GHz, 4GBs
of DDR, accelerators for automotive networking and many other
peripherals.

The added support is minimal and only includes the BL2 stage, with no
MMU enabled. The FIP is preloaded by the BootROM in SRAM, and BL2 copies
BL31 and BL33 from FIP to their designated addresses.

Change-Id: Iedda23302768ab70d63787117c5f6f3c21eb9842
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Dan Nica <dan.nica@nxp.com>
Signed-off-by: Andra-Teodora Ilie <andra.ilie@nxp.com>
Signed-off-by: Bogdan Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>

show more ...