Merge "fix: libc: use long for 64-bit types on aarch64" into integration

fix: libc: use long for 64-bit types on aarch64

Use long instead of long long on aarch64 for 64_t stdint types.
Introduce inttypes.h to properly support printf format specifiers for
fixed width type

fix: libc: use long for 64-bit types on aarch64

Use long instead of long long on aarch64 for 64_t stdint types.
Introduce inttypes.h to properly support printf format specifiers for
fixed width types for such change.

Change-Id: I0bca594687a996fde0a9702d7a383055b99f10a1
Signed-off-by: Scott Branden <scott.branden@broadcom.com>

show more ...

Merge changes from topic "tegra-downstream-08252020" into integration

* changes:
Tegra194: remove unused tegra_mc_defs header
Tegra: memctrl: platform setup handler functions
Tegra194: memctrl

Merge changes from topic "tegra-downstream-08252020" into integration

* changes:
Tegra194: remove unused tegra_mc_defs header
Tegra: memctrl: platform setup handler functions
Tegra194: memctrl: remove streamid security cfg registers
Tegra194: memctrl: remove streamid override cfg registers
Tegra: debug prints indicating SC7 entry sequence completion
Tegra194: add strict checking mode verification
Tegra194: memctrl: update TZDRAM base at 1MB granularity
Tegra194: ras: split up RAS error clear SMC call.
Tegra: platform specific GIC sources
Tegra194: add memory barriers during DRAM to SysRAM copy
Tegra: sip: add VPR resize enabled check
Tegra194: add redundancy checks for MMIO writes
Tegra: remove unused cortex_a53.h
Tegra194: report failure to enable dual execution
Tegra194: verify firewall settings before resource use

show more ...

Tegra194: add strict checking mode verification

After enabling the strict checking mode, verify that
the strict mode has really been enabled by querying
the MCE.

If the mode is found to be disabled

Tegra194: add strict checking mode verification

After enabling the strict checking mode, verify that
the strict mode has really been enabled by querying
the MCE.

If the mode is found to be disabled, the code should
assert.

Change-Id: I113ec8decb737f8208059a2a3ba3076fad77890e
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

show more ...

Merge changes from topic "tegra194-ras-handling" into integration

* changes:
Tegra194: ras: verbose prints for SErrors
Prevent RAS register access from lower ELs
Tegra194: SiP: clear RAS corre

Merge changes from topic "tegra194-ras-handling" into integration

* changes:
Tegra194: ras: verbose prints for SErrors
Prevent RAS register access from lower ELs
Tegra194: SiP: clear RAS corrected error records
Tegra194: add RAS exception handling

show more ...

Tegra194: SiP: clear RAS corrected error records

This patch introduces a function ID to clear all the RAS error
records for corrected errors.

Per latest requirement, ARM RAS corrected errors will b

Tegra194: SiP: clear RAS corrected error records

This patch introduces a function ID to clear all the RAS error
records for corrected errors.

Per latest requirement, ARM RAS corrected errors will be reported to
lower ELs via interrupts and cleared via SMC. This patch provides
required function to clear RAS error status.

This patch also sets up all required RAS Corrected errors in order to
route RAS corrected errors to lower ELs.

Change-Id: I554ba1d0797b736835aa27824782703682c91e51
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: David Pu <dpu@nvidia.com>

show more ...

Merge changes from topic "tegra-downstream-03192020" into integration

* changes:
Tegra194: move cluster and CPU counter to header file.
Tegra: gicv2: initialize target masks
spd: tlkd: support

Merge changes from topic "tegra-downstream-03192020" into integration

* changes:
Tegra194: move cluster and CPU counter to header file.
Tegra: gicv2: initialize target masks
spd: tlkd: support new TLK SMCs for RPMB service
Tegra210: trigger CPU0 hotplug power on using FC
Tegra: memctrl: cleanup streamid override registers
Tegra: memctrl_v2: remove support to secure TZSRAM
Tegra: include platform headers from individual makefiles
Tegra210: rename ENABLE_WDT_LEGACY_FIQ_HANDLING macro
Tegra194: SiP function ID to read SMMU_PER registers
Tegra: memctrl: map video memory as uncached
Tegra: remove support for USE_COHERENT_MEM
Tegra: remove circular dependency with common_def.h
Tegra: include missing stdbool.h
Tegra: remove support for SEPARATE_CODE_AND_RODATA=0

show more ...

Tegra: memctrl_v2: remove support to secure TZSRAM

This patch removes support to secure the on-chip TZSRAM memory for
Tegra186 and Tegra194 platforms as the previous bootloader does that
for them.

Tegra: memctrl_v2: remove support to secure TZSRAM

This patch removes support to secure the on-chip TZSRAM memory for
Tegra186 and Tegra194 platforms as the previous bootloader does that
for them.

Change-Id: I50c7b7f9694285fe31135ada09baed1cfedaaf07
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Merge changes from topic "tegra-downstream-01082020" into integration

* changes:
Tegra194: platform handler for entering CPU standby state
Tegra194: memctrl: force viw and vifalr/w transactions

Merge changes from topic "tegra-downstream-01082020" into integration

* changes:
Tegra194: platform handler for entering CPU standby state
Tegra194: memctrl: force viw and vifalr/w transactions as non-coherent
Tegra194: memctrl: fix bug in client order id reg value generation
Tegra194: memctrl: enable mc coalescer
Tegra194: update scratch registers used to read boot parameters
Tegra194: implement system shutdown/reset handlers
Tegra194: mce: support for shutdown and reboot
Tegra194: request CG7 before checking if SC7 is allowed
Tegra194: config to enable/disable strict checking mode
Tegra194: remove unused platform configs
Tegra194: restore XUSB stream IDs on System Resume

show more ...

Tegra194: mce: support for shutdown and reboot

This patch adds support for shutdown/reboot handlers to the MCE
driver.

ATF communicates with mce using nvg interface for shutdown &
reboot. Both shut

Tegra194: mce: support for shutdown and reboot

This patch adds support for shutdown/reboot handlers to the MCE
driver.

ATF communicates with mce using nvg interface for shutdown &
reboot. Both shutdown and reboot use the same nvg index.
However, the 1st bit of the nvg data argument differentiates
whether its a shutdown or reboot.

Change-Id: Id2d1b0c4fec55abf69b7f8adb65ca70bfa920e73
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

show more ...

Tegra194: config to enable/disable strict checking mode

This patch adds a new configuration option to the platform makefiles
that disables/enables strict checking mode. The config is enabled
by defa

Tegra194: config to enable/disable strict checking mode

This patch adds a new configuration option to the platform makefiles
that disables/enables strict checking mode. The config is enabled
by default.

Change-Id: I727dd0facee88d9517bf6956eaf9163eba25c8bb
Signed-off-by: Steven Kao <skao@nvidia.com>

show more ...

Merge changes from topic "tegra-downstream-092319" into integration

* changes:
Tegra194: add support to reset GPU
Tegra194: memctrl: fix logic to check TZDRAM config register access
Tegra: int

Merge changes from topic "tegra-downstream-092319" into integration

* changes:
Tegra194: add support to reset GPU
Tegra194: memctrl: fix logic to check TZDRAM config register access
Tegra: introduce plat_enable_console()
Tegra: include: drivers: introduce spe.h
Tegra194: update nvg header to v6.4
Tegra194: mce: enable strict checking
Tegra194: CC6 state from last offline CPU in the cluster
Tegra194: console driver compilation from platform makefiles
Tegra194: memctrl: platform handler for TZDRAM setup
Tegra194: memctrl: override SE client as coherent
Tegra194: save system suspend entry marker to TZDRAM
Tegra194: helper functions for CPU rst handler and SMMU ctx offset
Tegra194: cleanup references to Tegra186
Tegra194: mce: display NVG header version during boot
Tegra194: mce: fix cg_cstate encoding format
Tegra194: drivers: SE and RNG1/PKA1 context save support
Tegra194: rename secure scratch register macros
Tegra194: SiP: Fix Rule 8.4 and Rule 10.4 violation
Tegra194: mce: remove unsupported functionality
Tegra194: sanity check target cluster during core power on
Tegra194: fix defects flagged by MISRA scan
Tegra194: mce: fix defects flagged by MISRA scan
Tegra194: remove the GPU reset register macro
Tegra194: MC registers to allow CPU accesses to TZRAM
Tegra194: increase MAX_MMAP_REGIONS macro value
Tegra194: update nvg header to v6.1
Tegra194: update cache operations supported by the ROC
Tegra194: memctrl: platform handlers to reprogram MSS
Tegra194: core and cluster count values
Tegra194: correct the TEGRA_CAR_RESET_BASE macro value
Tegra194: add MC_SECURITY mask defines
Tegra194: Update wake mask, wake time for cpu offlining
Tegra194: program stream ids for XUSB
Tegra194: Update checks for c-state stats
Tegra194: smmu: fix mask for board revision id
Tegra194: smmu: ISO support
Tegra194: Initialize smmu on system suspend exit
Tegra194: Update cpu core-id calculation
Tegra194: read-modify-write ACTLR_ELx registers
Tegra194: Enable fake system suspend
Tegra194: convert 'target_cpu' and 'target_cluster' to 32-bits
Tegra194: platform support for memctrl/smmu drivers
Tegra194: Support for cpu suspend

show more ...

Tegra194: mce: enable strict checking

"Strict checking" is a mode where secure world can access
secure-only areas unlike legacy mode where secure world could
access non-secure spaces as well. Secure

Tegra194: mce: enable strict checking

"Strict checking" is a mode where secure world can access
secure-only areas unlike legacy mode where secure world could
access non-secure spaces as well. Secure-only areas are defined
as the TZ-DRAM carveout and any GSC with the CPU_SECURE bit set.
This mode not only helps prevent issues with IO-Coherency but aids
with security as well.

This patch implements the programming sequence required to enable
strict checking mode for Tegra194 SoCs.

Change-Id: Ic2e594f79ec7c5bc1339b509e67c4c62efb9d0c0
Signed-off-by: Dilan Lee <dilee@nvidia.com>

show more ...

Tegra194: mce: display NVG header version during boot

The MCE driver checks the NVG interface version during boot and
disaplys the hardware and software versions on the console. The
software version

Tegra194: mce: display NVG header version during boot

The MCE driver checks the NVG interface version during boot and
disaplys the hardware and software versions on the console. The
software version is being displayed as zero.

This patch updates the prints to use the real NVG header version
instead.

Change-Id: I8e9d2e6c43a59a8a6d5ca7aa8153b940fce86709
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra194: mce: remove unsupported functionality

This patch cleans up the mce driver files to remove all the unsupported
functionality. The MCE/NVG interface is not restricted to the EL3 space,
so cl

Tegra194: mce: remove unsupported functionality

This patch cleans up the mce driver files to remove all the unsupported
functionality. The MCE/NVG interface is not restricted to the EL3 space,
so clients can issue commands to the MCE firmware directly.

Change-Id: Idcebc42f31805f9c1abe1c1edc17850151aca11d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Tegra194: mce: fix defects flagged by MISRA scan

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

Fix

Tegra194: mce: fix defects flagged by MISRA scan

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

Fix variable essential type doesn't match [Rule 10.3]

Added curly braces ({}) around if/while statements in order to
make them compound [Rule 15.6]

Voided non c-library functions whose return types are not used
[Rule 17.7]

Change-Id: Iaae2ecaba3caf1469c44910d4e6aed0661597a51
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

show more ...

Tegra194: update nvg header to v6.1

This patch updates t194_nvg.h to v6.1 and does not issue NVG
commands for unsupported platforms.

Change-Id: I506b594a70a3651d01a412ab79b3c8919b1d66f1
Signed-off-

Tegra194: update nvg header to v6.1

This patch updates t194_nvg.h to v6.1 and does not issue NVG
commands for unsupported platforms.

Change-Id: I506b594a70a3651d01a412ab79b3c8919b1d66f1
Signed-off-by: Steven Kao <skao@nvidia.com>

show more ...

Merge changes from topic "tegra-downstream-092319" into integration

* changes:
Tegra194: remove L2 ECC parity protection setting
Tegra194: sip_calls: mark unused parameter as const
Tegra194: i

Merge changes from topic "tegra-downstream-092319" into integration

* changes:
Tegra194: remove L2 ECC parity protection setting
Tegra194: sip_calls: mark unused parameter as const
Tegra194: implement handler to retrieve power domain tree
Tegra194: mce: fix function declaration conflicts
Tegra194: add macros to read GPU reset status
Tegra194: skip notifying MCE in fake system suspend
Tegra194: Enable system suspend

show more ...

Tegra194: mce: fix function declaration conflicts

To fix MISRA defects, remove union in t186 MCE drivers
this driver should compatible with that.

Change-Id: I09e96a1874dd86626c7e41c92a1484a84e38740

Tegra194: mce: fix function declaration conflicts

To fix MISRA defects, remove union in t186 MCE drivers
this driver should compatible with that.

Change-Id: I09e96a1874dd86626c7e41c92a1484a84e387402
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

show more ...

Merge changes from topic "tegra-downstream-092319" into integration

* changes:
Tegra194: add macros for security carveout configuration registers
Tegra194: add 'TEGRA_TMRUS_SIZE' macro
Tegra19

Merge changes from topic "tegra-downstream-092319" into integration

* changes:
Tegra194: add macros for security carveout configuration registers
Tegra194: add 'TEGRA_TMRUS_SIZE' macro
Tegra194: Fix TEGRA186_SMMU_CTX_SIZE
Tegra194: Dont run MCE firmware on Emulation
Tegra194: remove GPU, MPCORE and PTC registers from streamid list
Tegra194: Support SMC64 encoding for MCE calls
Tegra194: Enable MCE driver
Tegra194: enable SMMU
Tegra194: add support for multiple SMMU devices
Tegra194: add SMMU and mc_sid support
Tegra194: psci: support for 64-bit TZDRAM base
Tegra194: base commit for the platform
Revert "Tegra: Add support for fake system suspend"

show more ...

Tegra194: Dont run MCE firmware on Emulation

Dont run MCE firmware on pre-silicon emulation platforms

Change-Id: I2a8d653e46f494621580ca92271a18e62f648859
Signed-off-by: Rohit Khanna <rokhanna@nvid

Tegra194: Dont run MCE firmware on Emulation

Dont run MCE firmware on pre-silicon emulation platforms

Change-Id: I2a8d653e46f494621580ca92271a18e62f648859
Signed-off-by: Rohit Khanna <rokhanna@nvidia.com>

show more ...

Tegra194: Enable MCE driver

This patch enable MCE driver for T19x SoC. The MCE driver
takes care of the communication with the MCE firmware to
achieve:

- Cold boot
- Warm boot
- Core/Cluster/System

Tegra194: Enable MCE driver

This patch enable MCE driver for T19x SoC. The MCE driver
takes care of the communication with the MCE firmware to
achieve:

- Cold boot
- Warm boot
- Core/Cluster/System Power management
- Custom MCE requests

Change-Id: I75854c0b649a691e9b244d9ed9fc1c19743e3e8d
Signed-off-by: Steven Kao <skao@nvidia.com>

show more ...

Tegra194: base commit for the platform

This patch creates the base commit for the Tegra194 platform, from
Tegra186 code base.

Change-Id: I1c77e4984f7ff39655f3fb79633d13d533707ede
Signed-off-by: Var

Tegra194: base commit for the platform

This patch creates the base commit for the Tegra194 platform, from
Tegra186 code base.

Change-Id: I1c77e4984f7ff39655f3fb79633d13d533707ede
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...