Merge changes from topic "hm/handoff-aarch32" into integration

* changes:
feat(fvp): support AArch32 booting with handoff
feat(arm): support AArch32 booting with handoff

feat(fvp): support AArch32 booting with handoff

Enable AArch32 SP_MIN booting on the FVP platform using Firmware
Handoff. Update plat_arm_sp_min_early_platform_setup() to parse boot
arguments passed

feat(fvp): support AArch32 booting with handoff

Enable AArch32 SP_MIN booting on the FVP platform using Firmware
Handoff. Update plat_arm_sp_min_early_platform_setup() to parse boot
arguments passed via the Firmware Handoff framework.

Also, adjust the maximum BL32 size calculation to use
PLAT_ARM_FW_HANDOFF_SIZE when TRANSFER_LIST is enabled.

Change-Id: I82032b1cebf8b37ff24dde4f2d07f7aaede33eb6
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>

show more ...

Merge changes from topic "hm/handoff-aarch32" into integration

* changes:
refactor(arm): simplify early platform setup functions
feat(bl32): enable r3 usage for boot args
feat(handoff): add li

Merge changes from topic "hm/handoff-aarch32" into integration

* changes:
refactor(arm): simplify early platform setup functions
feat(bl32): enable r3 usage for boot args
feat(handoff): add lib to sp-min sources
feat(handoff): add 32-bit variant of SRAM layout
feat(handoff): add 32-bit variant of ep info
fix(aarch32): avoid using r12 to store boot params
fix(arm): reinit secure and non-secure tls
refactor(handoff): downgrade error messages

show more ...

refactor(arm): simplify early platform setup functions

Refactor `arm_sp_min_early_platform_setup` to accept generic
`u_register_r` values to support receiving firmware handoff boot
arguments in comm

refactor(arm): simplify early platform setup functions

Refactor `arm_sp_min_early_platform_setup` to accept generic
`u_register_r` values to support receiving firmware handoff boot
arguments in common code. This has the added benefit of simplifying the
interface into common early platform setup.

Change-Id: Idfc3d41f94f2bf3a3a0c7ca39f6b9b0013836e3a
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>

show more ...

Merge changes I1bfa797e,I0ec7a70e into integration

* changes:
fix(tree): correct some typos
fix(rockchip): use semicolon instead of comma

fix(tree): correct some typos

found using codespell (https://github.com/codespell-project/codespell).

Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I1bfa797e3460adddeefa916bb68e22beddaf6

fix(tree): correct some typos

found using codespell (https://github.com/codespell-project/codespell).

Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I1bfa797e3460adddeefa916bb68e22beddaf6373

show more ...

Merge "refactor(build): distinguish BL2 as TF-A entry point and BL2 running at EL3" into integration

refactor(build): distinguish BL2 as TF-A entry point and BL2 running at EL3

BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is runnin

refactor(build): distinguish BL2 as TF-A entry point and BL2 running at EL3

BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).

BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.

Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>

show more ...

Merge changes from topic "refactor-hw-config-load" into integration

* changes:
docs(fvp): update loading addresses of HW_CONFIG
docs(fconf): update device tree binding for FCONF
feat(fvp): upd

Merge changes from topic "refactor-hw-config-load" into integration

* changes:
docs(fvp): update loading addresses of HW_CONFIG
docs(fconf): update device tree binding for FCONF
feat(fvp): update HW_CONFIG DT loading mechanism
refactor(st): update set_config_info function call
refactor(fvp_r): update set_config_info function call
refactor(arm): update set_config_info function call
feat(fconf): add NS load address in configuration DTB nodes

show more ...

feat(fvp): update HW_CONFIG DT loading mechanism

Currently, HW-config is loaded into non-secure memory, which mean
a malicious NS-agent could tamper with it. Ideally, this shouldn't
be an issue sinc

feat(fvp): update HW_CONFIG DT loading mechanism

Currently, HW-config is loaded into non-secure memory, which mean
a malicious NS-agent could tamper with it. Ideally, this shouldn't
be an issue since no software runs in non-secure world at this time
(non-secure world has not been started yet).

It does not provide a guarantee though since malicious external
NS-agents can take control of this memory region for update/corruption
after BL2 loads it and before BL31/BL32/SP_MIN consumes it. The threat
is mapped to Threat ID#3 (Bypass authentication scenario) in threat
model [1].

Hence modified the code as below -
1. BL2 loads the HW_CONFIG into secure memory
2. BL2 makes a copy of the HW_CONFIG in the non-secure memory at an
address provided by the newly added property(ns-load-address) in
the 'hw-config' node of the FW_CONFIG
3. SP_MIN receives the FW_CONFIG address from BL2 via arg1 so that
it can retrieve details (address and size) of HW_CONFIG from
FW_CONFIG
4. A secure and non-secure HW_CONFIG address will eventually be used
by BL31/SP_MIN/BL32 and BL33 components respectively
5. BL31/SP_MIN dynamically maps the Secure HW_CONFIG region and reads
information from it to local variables (structures) and then
unmaps it
6. Reduce HW_CONFIG maximum size from 16MB to 1MB; it appears
sufficient, and it will also create a free space for any future
components to be added to memory

[1]: https://trustedfirmware-a.readthedocs.io/en/latest/threat_model/threat_model.html

Change-Id: I1d431f3e640ded60616604b1c33aa638b9a1e55e
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

Merge changes from topic "mp/enhanced_pal_hw" into integration

* changes:
plat/arm/fvp: populate pwr domain descriptor dynamically
fconf: Extract topology node properties from HW_CONFIG dtb
fc

Merge changes from topic "mp/enhanced_pal_hw" into integration

* changes:
plat/arm/fvp: populate pwr domain descriptor dynamically
fconf: Extract topology node properties from HW_CONFIG dtb
fconf: necessary modifications to support fconf in BL31 & SP_MIN
fconf: enhancements to firmware configuration framework

show more ...

fconf: necessary modifications to support fconf in BL31 & SP_MIN

Necessary infrastructure added to integrate fconf framework in BL31 & SP_MIN.
Created few populator() functions which parse HW_CONFIG

fconf: necessary modifications to support fconf in BL31 & SP_MIN

Necessary infrastructure added to integrate fconf framework in BL31 & SP_MIN.
Created few populator() functions which parse HW_CONFIG device tree
and registered them with fconf framework. Many of the changes are
only applicable for fvp platform.

This patch:
1. Adds necessary symbols and sections in BL31, SP_MIN linker script
2. Adds necessary memory map entry for translation in BL31, SP_MIN
3. Creates an abstraction layer for hardware configuration based on
fconf framework
4. Adds necessary changes to build flow (makefiles)
5. Minimal callback to read hw_config dtb for capturing properties
related to GIC(interrupt-controller node)
6. updates the fconf documentation

Change-Id: Ib6292071f674ef093962b9e8ba0d322b7bf919af
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge pull request #1784 from antonio-nino-diaz-arm/an/includes-arm

plat/arm: Cleanup of includes and drivers

plat/arm: Sanitise includes

Use full include paths like it is done for common includes.

This cleanup was started in commit d40e0e08283a ("Sanitise includes
across codebase"), but it only cleaned co

plat/arm: Sanitise includes

Use full include paths like it is done for common includes.

This cleanup was started in commit d40e0e08283a ("Sanitise includes
across codebase"), but it only cleaned common files and drivers. This
patch does the same to Arm platforms.

Change-Id: If982e6450bbe84dceb56d464e282bcf5d6d9ab9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1297 from soby-mathew/sm/fix_aarch32_plat_cmn

Remove sp_min functions from plat_common.c

Remove sp_min functions from plat_common.c

This patch removes default platform implementations of sp_min
platform APIs from plat/common/aarch32/plat_common.c. The APIs
are now implemented in `plat_s

Remove sp_min functions from plat_common.c

This patch removes default platform implementations of sp_min
platform APIs from plat/common/aarch32/plat_common.c. The APIs
are now implemented in `plat_sp_min_common.c` file within the
same folder.

The ARM platform layer had a weak definition of sp_min_platform_setup2()
which conflicted with the weak definition in the common file. Hence this
patch fixes that by introducing a `plat_arm_` version of the API thus
allowing individual boards within ARM platforms to override it if they
wish to.

Fixes ARM-software/tf-issues#559

Change-Id: I11a74ecae8191878ccc7ea03f12bdd5ae88faba5
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

show more ...

Merge pull request #1263 from soby-mathew/sm/dyn_config

Dynamic Configuration Prototype

ARM Platforms: Migrate to new BL handover interface

This patch migrates the ARM Standard platforms to the new BL
handover interface. The arm_blx_early_platform_setup() functions
are also modified to

ARM Platforms: Migrate to new BL handover interface

This patch migrates the ARM Standard platforms to the new BL
handover interface. The arm_blx_early_platform_setup() functions
are also modified to take in 4 arguments. The `ARM_BL31_PLAT_PARAM_VAL`
value passed to BL31 from BL2 is now in arg3 in preparation of dynamic
configuration arguments.

Change-Id: I33e8e61325a19e7a7127b1ff203c3b86921bf153
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

show more ...

Merge pull request #925 from dp-arm/dp/spdx

Use SPDX license identifiers

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/

Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

show more ...

Merge pull request #713 from yatharth-arm/yk/AArch32_porting

Add basic AArch32 support for BL1 & BL2

AArch32: Support in SP_MIN to receive arguments from BL2

This patch adds support in SP_MIN to receive generic and
platform specific arguments from BL2.

The new signature is as following:
void s

AArch32: Support in SP_MIN to receive arguments from BL2

This patch adds support in SP_MIN to receive generic and
platform specific arguments from BL2.

The new signature is as following:
void sp_min_early_platform_setup(void *from_bl2,
void *plat_params_from_bl2);

ARM platforms have been modified to use this support.

Note: Platforms may break if using old signature.
Default value for RESET_TO_SP_MIN is changed to 0.

Change-Id: I008d4b09fd3803c7b6231587ebf02a047bdba8d0

show more ...

Merge pull request #678 from soby-mathew/sm/PSCI_AArch32

Introduce AArch32 support for PSCI library

AArch32: Add FVP support for SP_MIN

This patch implements the support for SP_MIN in FVP. The SP_MIN platform
APIs are implemented and the required makefile support is added for FVP.

Change-Id: Id50

AArch32: Add FVP support for SP_MIN

This patch implements the support for SP_MIN in FVP. The SP_MIN platform
APIs are implemented and the required makefile support is added for FVP.

Change-Id: Id50bd6093eccbd5e38894e3fd2b20d5baeac5452

show more ...