include/drivers/marvell/mochi: add detection of secure mode

Change-Id: I99afc312617df86ae68eb30302203a03877ca748
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git

include/drivers/marvell/mochi: add detection of secure mode

Change-Id: I99afc312617df86ae68eb30302203a03877ca748
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/22541
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaszczyk@marvell.com>
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>

show more ...

drivers/rambus: add TRNG-IP-76 driver

Add Rambus (InsideSecure) TRNG-IP-76 HW RNG driver.
This IP is part of Marvell Armada CP110/CP115 die integrated
to Armada 7k/8K/CN913x SoCs

Change-Id: I9c5f51

drivers/rambus: add TRNG-IP-76 driver

Add Rambus (InsideSecure) TRNG-IP-76 HW RNG driver.
This IP is part of Marvell Armada CP110/CP115 die integrated
to Armada 7k/8K/CN913x SoCs

Change-Id: I9c5f510ad6728c7ed168da43d85b19d5852cd873
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>

show more ...

tzc400: fix logical error in FILTER_BIT definitions

The filters parameter passed to tzc400_configure_region() is supposed
to be filter bit flag without bit shift, so the macros
TZC_400_REGION_ATTR_F

tzc400: fix logical error in FILTER_BIT definitions

The filters parameter passed to tzc400_configure_region() is supposed
to be filter bit flag without bit shift, so the macros
TZC_400_REGION_ATTR_FILTER_BIT and TZC_400_REGION_ATTR_FILTER_BIT_ALL
should always construct the value without any shift.

It is not a functional issue for TZC_REGION_ATTR_F_EN_SHIFT is lucky
to be 0.

Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I5d363c462b8517256523f637e670eefa56722afd

show more ...

Merge "ddr: stm32mp1_ddr: correct SELFREF_TO_X32 mask" into integration

Add TRNG Firmware Interface service

This adds the TRNG Firmware Interface Service to the standard
service dispatcher. This includes a method for dispatching entropy
requests to platforms and include

Add TRNG Firmware Interface service

This adds the TRNG Firmware Interface Service to the standard
service dispatcher. This includes a method for dispatching entropy
requests to platforms and includes an entropy pool implementation to
avoid dropping any entropy requested from the platform.

Change-Id: I71cadb3cb377a507652eca9e0d68714c973026e9
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

ddr: stm32mp1_ddr: correct SELFREF_TO_X32 mask

In DDR controller PWRTMG register, the mask for field SELFREF_TO_X32 is
wrong. This field is from bit 16 to 23.

Change-Id: Id336fb08c88f0a153df186dd81

ddr: stm32mp1_ddr: correct SELFREF_TO_X32 mask

In DDR controller PWRTMG register, the mask for field SELFREF_TO_X32 is
wrong. This field is from bit 16 to 23.

Change-Id: Id336fb08c88f0a153df186dd819e41af72febb88
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

libc: Import strtoull from FreeBSD project

From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, t

libc: Import strtoull from FreeBSD project

From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, the TF-A libc does not provide an
implementation of strto*(), making this rule impossible to satisfy.

Also made small changes to fit into TF-A project. Added the source
files to the libc makefile

[1] https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-guidelines.html#libc-functions-that-are-banned-or-to-be-used-with-caution

Change-Id: I2e94a0b227ec39f6f4530dc50bb477999d27730f
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

libc: Import strtoll from FreeBSD project

From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, th

libc: Import strtoll from FreeBSD project

From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, the TF-A libc does not provide an
implementation of strto*(), making this rule impossible to satisfy.

Also made small changes to fit into TF-A project. Added the source
files to the libc makefile

[1] https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-guidelines.html#libc-functions-that-are-banned-or-to-be-used-with-caution

Change-Id: I9cb581574d46de73c3d6917ebf78935fc5ac075a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

libc: Import strtoul from FreeBSD project

From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, th

libc: Import strtoul from FreeBSD project

From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, the TF-A libc does not provide an
implementation of strto*(), making this rule impossible to satisfy.

Also made small changes to fit into TF-A project. Added the source
files to the libc makefile

[1] https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-guidelines.html#libc-functions-that-are-banned-or-to-be-used-with-caution

Change-Id: I8c3b92751d1ce226c966f7c81fedd83f0846865e
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

libc: Import strtol from FreeBSD project

From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, the

libc: Import strtol from FreeBSD project

From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, the TF-A libc does not provide an
implementation of strto*(), making this rule impossible to satisfy.

Also made small changes to fit into TF-A project. Added the source
files to the libc makefile

[1] https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-guidelines.html#libc-functions-that-are-banned-or-to-be-used-with-caution

Change-Id: Ica95bf5da722913834fe90bf3fe743aa34e01e80
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Fix exception handlers in BL31: Use DSB to synchronize pending EA

For SoCs which do not implement RAS, use DSB as a barrier to
synchronize pending external aborts at the entry and exit of
exception

Fix exception handlers in BL31: Use DSB to synchronize pending EA

For SoCs which do not implement RAS, use DSB as a barrier to
synchronize pending external aborts at the entry and exit of
exception handlers. This is needed to isolate the SErrors to
appropriate context.

However, this introduces an unintended side effect as discussed
in the https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3440
A summary of the side effect and a quick workaround is provided as
part of this patch and summarized here:

The explicit DSB at the entry of various exception vectors in BL31
for handling exceptions from lower ELs can inadvertently trigger an
SError exception in EL3 due to pending asyncrhonouus aborts in lower
ELs. This will end up being handled by serror_sp_elx in EL3 which will
ultimately panic and die.

The way to workaround is to update a flag to indicate if the exception
truly came from EL3. This flag is allocated in the cpu_context
structure. This is not a bullet proof solution to the problem at hand
because we assume the instructions following "isb" that help to update
the flag (lines 100-102 & 139-141) execute without causing further
exceptions.

Change-Id: I4d345b07d746a727459435ddd6abb37fda24a9bf
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge changes from topic "scmi-msg" into integration

* changes:
doc: maintainers: add scmi server
drivers: move scmi-msg out of st

Merge changes from topic "tp-feat-rng" into integration

* changes:
plat/qemu: Use RNDR in stack protector
Makefile: Add FEAT_RNG support define
Define registers for FEAT_RNG support

drivers: move scmi-msg out of st

Make the scmi-msg driver reused by others.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I5bc35fd4dab70f45c09b8aab65af4209cf23b124

marvell: uart: a3720: Fix macro name for 6th bit of Status Register

This patch does not change code, it only updates comments and macro name
for 6th bit of Status Register. So TF-A binary stay same.

marvell: uart: a3720: Fix macro name for 6th bit of Status Register

This patch does not change code, it only updates comments and macro name
for 6th bit of Status Register. So TF-A binary stay same.

6th bit of the Status Register is named TX EMPTY and is set to 1 when both
Transmitter Holding Register (THR) or Transmitter Shift Register (TSR) are
empty. It is when all characters were already transmitted.

There is also TX FIFO EMPTY bit in the Status Register which is set to 1
only when THR is empty.

In both console_a3700_core_init() and console_a3700_core_flush() functions
we should wait until both THR and TSR are empty therefore we should check
6th bit of the Status Register.

So current code is correct, just had misleading macro names and comments.
This change fixes this "documentation" issue, fixes macro name for 6th bit
of the Status Register and also updates comments.

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I19e4e7f53a90bcfb318e6dd1b1249b6cbf81c4d3

show more ...

marvell: uart: a3720: Implement console_a3700_core_getc

Implementation is simple, just check if there is a pending character in
RX FIFO via RXRDY bit of Status Register and if yes, read it from
UART

marvell: uart: a3720: Implement console_a3700_core_getc

Implementation is simple, just check if there is a pending character in
RX FIFO via RXRDY bit of Status Register and if yes, read it from
UART_RX_REG register.

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I226b6e336f44f5d0ca8dcb68e49a68e8f2f49708

show more ...

Define registers for FEAT_RNG support

Add ISAR0 feature register read helper, location
of FEAT_RNG bits, feature support helper and the
rndr/rndrrs register read helpers.

Signed-off-by: Tomas Pilar

Define registers for FEAT_RNG support

Add ISAR0 feature register read helper, location
of FEAT_RNG bits, feature support helper and the
rndr/rndrrs register read helpers.

Signed-off-by: Tomas Pilar <tomas@nuviainc.com>
Change-Id: I2a785a36f62a917548e55892ce92fa8b72fcb99d

show more ...

Workaround for Cortex A78 erratum 1951500

Cortex A78 erratum 1951500 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1. The workaround is to insert a DMB ST before
acquire atomic in

Workaround for Cortex A78 erratum 1951500

Cortex A78 erratum 1951500 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1. The workaround is to insert a DMB ST before
acquire atomic instructions without release semantics. This workaround
works on revisions r1p0 and r1p1, in r0p0 there is no workaround.

SDEN can be found here:
https://documentation-service.arm.com/static/5fb66157ca04df4095c1cc2e

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I47610cee75af6a127ea65edc4d5cffc7e6a2d0a3

show more ...

Workaround for Cortex A78 erratum 1941498

Cortex A78 erratum 1941498 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1. The workaround is to set bit 8 in the ECTLR_EL1
register, the

Workaround for Cortex A78 erratum 1941498

Cortex A78 erratum 1941498 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1. The workaround is to set bit 8 in the ECTLR_EL1
register, there is a small performance cost (<0.5%) for setting this bit.

SDEN can be found here:
https://documentation-service.arm.com/static/5fb66157ca04df4095c1cc2e

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I959cee8e3d46c1b84ff5e4409ce5945e459cc6a9

show more ...

cadence: Change logic in uart driver

Write char if fifo is empty. If this is done like this all chars are
printed. Because origin code just put that chars to fifo and in case of
reset messages were

cadence: Change logic in uart driver

Write char if fifo is empty. If this is done like this all chars are
printed. Because origin code just put that chars to fifo and in case of
reset messages were missing.

Before this change chars are put to fifo and only check before adding if
fifo is full. The patch is changing this logic that it is adding char only
when fifo is empty to make sure that in case of reset (by another SW for
example) all chars are printed. Maybe one char can be missed but for IP
itself it is much easier to send just one char compare to full fifo.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Ic24c2c1252bce24be2aed68ee29477ca4a549e5f

show more ...

Merge changes I0c5f32e8,Id49c124c,Idcfe933d into integration

* changes:
allwinner: Use RSB for the PMIC connection on H6
allwinner: Return the PMIC to I2C mode after use
allwinner: Always use

Merge changes I0c5f32e8,Id49c124c,Idcfe933d into integration

* changes:
allwinner: Use RSB for the PMIC connection on H6
allwinner: Return the PMIC to I2C mode after use
allwinner: Always use a 3MHz RSB bus clock

show more ...

Merge changes from topic "tc0_optee_sp" into integration

* changes:
fdts: tc0: Add reserved-memory node for OP-TEE
plat: tc0: OP-TEE as S-EL1 SP with SPMC at S-EL2
docs: arm: Add OPTEE_SP_FW_C

Merge changes from topic "tc0_optee_sp" into integration

* changes:
fdts: tc0: Add reserved-memory node for OP-TEE
plat: tc0: OP-TEE as S-EL1 SP with SPMC at S-EL2
docs: arm: Add OPTEE_SP_FW_CONFIG
plat: tc0: enable opteed support
plat: arm: Increase SP max size

show more ...

plat: arm: Increase SP max size

Increase SP max size for latest OP-TEE build with debug and
stats enabled.

Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I4593884e0

plat: arm: Increase SP max size

Increase SP max size for latest OP-TEE build with debug and
stats enabled.

Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I4593884e0deb39ada10009f6876d815136f8ee65

show more ...

allwinner: Return the PMIC to I2C mode after use

This gives the rich OS the flexibility to choose between I2C and RSB
communication. Since a runtime address can only be assigned once after
entering

allwinner: Return the PMIC to I2C mode after use

This gives the rich OS the flexibility to choose between I2C and RSB
communication. Since a runtime address can only be assigned once after
entering RSB mode, it also lets the rich OS choose any runtime address.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id49c124c5e925985fc31c0ba38c7fb6c941aafa8

show more ...

Add support for FEAT_MTPMU for Armv8.6

If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happ

Add support for FEAT_MTPMU for Armv8.6

If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happening on other threads.

If FEAT_MTPMU is implemented, EL3 (or EL2) can override the MT bit
leaving it to effective state of 0 regardless of any write to it.

This patch introduces the DISABLE_MTPMU flag, which allows to diable
multithread event count from EL3 (or EL2). The flag is disabled
by default so the behavior is consistent with those architectures
that do not implement FEAT_MTPMU.

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Iee3a8470ae8ba13316af1bd40c8d4aa86e0cb85e

show more ...