tree-wide: remove useless newline character in *MSG() messages

The *MSG() macros take care of printing a newline. Adding a newline
character ('\n') is useless. Remove it.

Signed-off-by: Vincent Mai

tree-wide: remove useless newline character in *MSG() messages

The *MSG() macros take care of printing a newline. Adding a newline
character ('\n') is useless. Remove it.

Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Etienne Carriere <etienne.carriere@foss.st.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

drivers: regulator: GPIO controlled regulator

Implements a GPIO controlled regulators driver compliant with DT nodes
compatible with regulator-gpio. These regulators use GPIO pins to select
the volt

drivers: regulator: GPIO controlled regulator

Implements a GPIO controlled regulators driver compliant with DT nodes
compatible with regulator-gpio. These regulators use GPIO pins to select
the voltage level. The implementation supports only dual voltage level
selection using a single pin. The DT bindings allows more pins to
select between more voltages but no known platform currently requires
that so we preferred the simplified case.

Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

core: interrupt_raise_sgi() updates

Adds ITR_CPU_MASK_TO_THIS_CPU and ITR_CPU_MASK_TO_OTHER_CPUS to simplify
targeting CPUs in some use cases. The cpu_mask parameter is changed to a
uint32_t to make

core: interrupt_raise_sgi() updates

Adds ITR_CPU_MASK_TO_THIS_CPU and ITR_CPU_MASK_TO_OTHER_CPUS to simplify
targeting CPUs in some use cases. The cpu_mask parameter is changed to a
uint32_t to make room for the two new flags.

The gic driver is updated to support this new flag.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

drivers: crypto: caam: fix job ring interruption number

The job ring interruption number is 356 for job ring 3.

Fixes: b21f12209671 ("drivers: crypto: caam: use job ring 3 on i.mx8dxlevk")
Signed-o

drivers: crypto: caam: fix job ring interruption number

The job ring interruption number is 356 for job ring 3.

Fixes: b21f12209671 ("drivers: crypto: caam: use job ring 3 on i.mx8dxlevk")
Signed-off-by: Clement Faure <clement.faure@nxp.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

core: drivers: add HiSilicon TRNG implementation

Based on HiSilicon hardware, a matching TRNG module is added.
The driver is enabled for the D06 platform (PLATFORM=d06).

Signed-off-by: loubaihui <l

core: drivers: add HiSilicon TRNG implementation

Based on HiSilicon hardware, a matching TRNG module is added.
The driver is enabled for the D06 platform (PLATFORM=d06).

Signed-off-by: loubaihui <loubaihui1@huawei.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@foss.st.com>
Acked-by: Xiaoxu Zeng <zengxiaoxu@huawei.com>
[jf: amend commit description]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

plat-stm32mp2: add new platform support

Initial configuration for STM32MP2x platforms.
Add the initial memory layout and the MMU bus reference
addresses. Default RAM size is 4GBytes
It adds also the

plat-stm32mp2: add new platform support

Initial configuration for STM32MP2x platforms.
Add the initial memory layout and the MMU bus reference
addresses. Default RAM size is 4GBytes
It adds also the console initialization and GIC support.

There are no shared resources on STM32MP25x platforms. Use
stm32_pinctrl_set_secure_cfg() API in the STM32 UART driver for now.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: stm32_gpio: remove unused APIs

Remove unused stm32_get_gpio_bank_offset() and stm32_get_gpio_count()
APIs.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Eti

drivers: stm32_gpio: remove unused APIs

Remove unused stm32_get_gpio_bank_offset() and stm32_get_gpio_count()
APIs.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: crypto: caam: use job ring 3 on i.mx8dxlevk

Use the job ring #3 on i.mx8dxl to avoid resource conflict with other
software stacks.

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Acke

drivers: crypto: caam: use job ring 3 on i.mx8dxlevk

Use the job ring #3 on i.mx8dxl to avoid resource conflict with other
software stacks.

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

drivers: plic: Ignore interrupt source ID 0

According to RISC-V PLIC specification, interrupt ID 0 is reserved to
mean "no interrupt". Therefore, we should ignore it.

Signed-off-by: Alvin Chang <al

drivers: plic: Ignore interrupt source ID 0

According to RISC-V PLIC specification, interrupt ID 0 is reserved to
mean "no interrupt". Therefore, we should ignore it.

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

drivers: atmel_piobu: upgrade to new interrupt framework

Moves atmel_piobu driver to the new interrupt framework API functions.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by

drivers: atmel_piobu: upgrade to new interrupt framework

Moves atmel_piobu driver to the new interrupt framework API functions.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: sp805_wdt.c: use the new interrupt API

Upgrades sp805_wdt.c driver to the new interrupt API functions as
itr_alloc_add() and friends will be removed.

Reviewed-by: Jens Wiklander <jens.wikl

drivers: sp805_wdt.c: use the new interrupt API

Upgrades sp805_wdt.c driver to the new interrupt API functions as
itr_alloc_add() and friends will be removed.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: crypto: caam: upgrade to new interrupt framework

Moves CAAM job ring driver to the new interrupt framework API functions.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off

drivers: crypto: caam: upgrade to new interrupt framework

Moves CAAM job ring driver to the new interrupt framework API functions.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: atmel_wdt: upgrade to new interrupt framework

Moves atmel_wdt watchdog driver to the new interrupt framework
API functions.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-o

drivers: atmel_wdt: upgrade to new interrupt framework

Moves atmel_wdt watchdog driver to the new interrupt framework
API functions.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: caam: remove unnecessary header file

Remove #include <caam_utils_status.h>

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>

plat-stm32mp1: stm32mp1_pmic: regulators voltage list

Implements operator supported_voltages for stm32mp1 PMIC regulators
driver. A voltage list array is allocated during initialization and
freed up

plat-stm32mp1: stm32mp1_pmic: regulators voltage list

Implements operator supported_voltages for stm32mp1 PMIC regulators
driver. A voltage list array is allocated during initialization and
freed upon core initialization completion. This prevents wasting heap
when the list is queried only during boot time.

Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: regulator: stm32_vrefbuf

Implements and enable STM32 VREFBUF regulator driver for stm32mp1
platform.

Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Etienne Carr

drivers: regulator: stm32_vrefbuf

Implements and enable STM32 VREFBUF regulator driver for stm32mp1
platform.

Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: crypto: stm32: lower verbosity on SAES use

Changes SAES context allocation/release trace message from debug level
to flow level otherwise each access to the secure storage emits debug
messa

drivers: crypto: stm32: lower verbosity on SAES use

Changes SAES context allocation/release trace message from debug level
to flow level otherwise each access to the secure storage emits debug
messages.

Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: regulator: consider DT property regulator-boot-on

Defines regulator flag REGULATOR_BOOT_ON for regulators with the
regulator-boot-on property in their DT node.

Acked-by: Gatien Chevallier

drivers: regulator: consider DT property regulator-boot-on

Defines regulator flag REGULATOR_BOOT_ON for regulators with the
regulator-boot-on property in their DT node.

Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: saic: remove stubbed functions

With the commit b2d6db21ec5e ("core: interrupt: helper function for
raise_pi, raise_sgi, set_affinity") the struct itr_ops .raise_pi,
.raise_sgi, and .set_aff

drivers: saic: remove stubbed functions

With the commit b2d6db21ec5e ("core: interrupt: helper function for
raise_pi, raise_sgi, set_affinity") the struct itr_ops .raise_pi,
.raise_sgi, and .set_affinity are now optional so remove the stubbed
functions.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: hfic: remove stubbed functions

With the commit b2d6db21ec5e ("core: interrupt: helper function for
raise_pi, raise_sgi, set_affinity") the struct itr_ops .raise_pi,
.raise_sgi, and .set_aff

drivers: hfic: remove stubbed functions

With the commit b2d6db21ec5e ("core: interrupt: helper function for
raise_pi, raise_sgi, set_affinity") the struct itr_ops .raise_pi,
.raise_sgi, and .set_affinity are now optional so remove the stubbed
functions.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: imx: mu: add support for mx8dxl

Add MU support for mx8dxl platforms.

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by:

drivers: imx: mu: add support for mx8dxl

Add MU support for mx8dxl platforms.

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: caam: add support for mx8dxl

Add support for mx8dxl platforms.
The HAL support is identical to mx8qm/qxp platforms.

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Acked-by: Jerome Fo

drivers: caam: add support for mx8dxl

Add support for mx8dxl platforms.
The HAL support is identical to mx8qm/qxp platforms.

Signed-off-by: Clement Faure <clement.faure@nxp.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: stm32_i2c: register a DT_DRIVER_I2C driver

Registers stm32_i2c driver as a DT_DRIVER_I2C driver.

Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Thomas Bourgoin <thom

drivers: stm32_i2c: register a DT_DRIVER_I2C driver

Registers stm32_i2c driver as a DT_DRIVER_I2C driver.

Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-stm32mp1: shared_resources: simplify GPIOZ bank pin count

Changes initialization of GPIOZ bank pin count from the DT bank
node now using the GPIO bank driver probing to get and save the
informa

plat-stm32mp1: shared_resources: simplify GPIOZ bank pin count

Changes initialization of GPIOZ bank pin count from the DT bank
node now using the GPIO bank driver probing to get and save the
information rather than service_init() initcall level as prior
this change.

Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

drivers: regulator: add regulator_dt_get_supply()

Implements regulator_dt_get_supply() API function for consumer
drivers to get a regulator supply using the driver device DT node
data. The function

drivers: regulator: add regulator_dt_get_supply()

Implements regulator_dt_get_supply() API function for consumer
drivers to get a regulator supply using the driver device DT node
data. The function returns TEE_ERROR_DEFER_DRIVER_INIT when the
target supply exists but is yet not initialized.

Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Co-developed-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...