1 /* 2 * (C) Copyright 2010 3 * Texas Instruments, <www.ti.com> 4 * 5 * Aneesh V <aneesh@ti.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 #include <common.h> 10 #include <dm.h> 11 #include <spl.h> 12 #include <asm/u-boot.h> 13 #include <nand.h> 14 #include <fat.h> 15 #include <version.h> 16 #include <image.h> 17 #include <malloc.h> 18 #include <dm/root.h> 19 #include <linux/compiler.h> 20 21 DECLARE_GLOBAL_DATA_PTR; 22 23 #ifndef CONFIG_SYS_UBOOT_START 24 #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE 25 #endif 26 #ifndef CONFIG_SYS_MONITOR_LEN 27 /* Unknown U-Boot size, let's assume it will not be more than 200 KB */ 28 #define CONFIG_SYS_MONITOR_LEN (200 * 1024) 29 #endif 30 31 u32 *boot_params_ptr = NULL; 32 struct spl_image_info spl_image; 33 34 /* Define board data structure */ 35 static bd_t bdata __attribute__ ((section(".data"))); 36 37 /* 38 * Board-specific Platform code can reimplement show_boot_progress () if needed 39 */ 40 __weak void show_boot_progress(int val) {} 41 42 /* 43 * Default function to determine if u-boot or the OS should 44 * be started. This implementation always returns 1. 45 * 46 * Please implement your own board specific funcion to do this. 47 * 48 * RETURN 49 * 0 to not start u-boot 50 * positive if u-boot should start 51 */ 52 #ifdef CONFIG_SPL_OS_BOOT 53 __weak int spl_start_uboot(void) 54 { 55 puts("SPL: Please implement spl_start_uboot() for your board\n"); 56 puts("SPL: Direct Linux boot not active!\n"); 57 return 1; 58 } 59 #endif 60 61 /* 62 * Weak default function for board specific cleanup/preparation before 63 * Linux boot. Some boards/platforms might not need it, so just provide 64 * an empty stub here. 65 */ 66 __weak void spl_board_prepare_for_linux(void) 67 { 68 /* Nothing to do! */ 69 } 70 71 __weak void spl_board_prepare_for_boot(void) 72 { 73 /* Nothing to do! */ 74 } 75 76 void spl_set_header_raw_uboot(void) 77 { 78 spl_image.size = CONFIG_SYS_MONITOR_LEN; 79 spl_image.entry_point = CONFIG_SYS_UBOOT_START; 80 spl_image.load_addr = CONFIG_SYS_TEXT_BASE; 81 spl_image.os = IH_OS_U_BOOT; 82 spl_image.name = "U-Boot"; 83 } 84 85 int spl_parse_image_header(const struct image_header *header) 86 { 87 u32 header_size = sizeof(struct image_header); 88 89 if (image_get_magic(header) == IH_MAGIC) { 90 if (spl_image.flags & SPL_COPY_PAYLOAD_ONLY) { 91 /* 92 * On some system (e.g. powerpc), the load-address and 93 * entry-point is located at address 0. We can't load 94 * to 0-0x40. So skip header in this case. 95 */ 96 spl_image.load_addr = image_get_load(header); 97 spl_image.entry_point = image_get_ep(header); 98 spl_image.size = image_get_data_size(header); 99 } else { 100 spl_image.entry_point = image_get_load(header); 101 /* Load including the header */ 102 spl_image.load_addr = spl_image.entry_point - 103 header_size; 104 spl_image.size = image_get_data_size(header) + 105 header_size; 106 } 107 spl_image.os = image_get_os(header); 108 spl_image.name = image_get_name(header); 109 debug("spl: payload image: %.*s load addr: 0x%x size: %d\n", 110 (int)sizeof(spl_image.name), spl_image.name, 111 spl_image.load_addr, spl_image.size); 112 } else { 113 #ifdef CONFIG_SPL_PANIC_ON_RAW_IMAGE 114 /* 115 * CONFIG_SPL_PANIC_ON_RAW_IMAGE is defined when the 116 * code which loads images in SPL cannot guarantee that 117 * absolutely all read errors will be reported. 118 * An example is the LPC32XX MLC NAND driver, which 119 * will consider that a completely unreadable NAND block 120 * is bad, and thus should be skipped silently. 121 */ 122 panic("** no mkimage signature but raw image not supported"); 123 #elif defined(CONFIG_SPL_ABORT_ON_RAW_IMAGE) 124 /* Signature not found, proceed to other boot methods. */ 125 return -EINVAL; 126 #else 127 /* Signature not found - assume u-boot.bin */ 128 debug("mkimage signature not found - ih_magic = %x\n", 129 header->ih_magic); 130 spl_set_header_raw_uboot(); 131 #endif 132 } 133 return 0; 134 } 135 136 __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) 137 { 138 typedef void __noreturn (*image_entry_noargs_t)(void); 139 140 image_entry_noargs_t image_entry = 141 (image_entry_noargs_t)(unsigned long)spl_image->entry_point; 142 143 debug("image entry point: 0x%X\n", spl_image->entry_point); 144 image_entry(); 145 } 146 147 #ifndef CONFIG_SPL_LOAD_FIT_ADDRESS 148 # define CONFIG_SPL_LOAD_FIT_ADDRESS 0 149 #endif 150 151 #ifdef CONFIG_SPL_RAM_DEVICE 152 static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector, 153 ulong count, void *buf) 154 { 155 debug("%s: sector %lx, count %lx, buf %lx\n", 156 __func__, sector, count, (ulong)buf); 157 memcpy(buf, (void *)(CONFIG_SPL_LOAD_FIT_ADDRESS + sector), count); 158 return count; 159 } 160 161 static int spl_ram_load_image(void) 162 { 163 struct image_header *header; 164 165 header = (struct image_header *)CONFIG_SPL_LOAD_FIT_ADDRESS; 166 167 if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && 168 image_get_magic(header) == FDT_MAGIC) { 169 struct spl_load_info load; 170 171 debug("Found FIT\n"); 172 load.bl_len = 1; 173 load.read = spl_ram_load_read; 174 spl_load_simple_fit(&load, 0, header); 175 } else { 176 debug("Legacy image\n"); 177 /* 178 * Get the header. It will point to an address defined by 179 * handoff which will tell where the image located inside 180 * the flash. For now, it will temporary fixed to address 181 * pointed by U-Boot. 182 */ 183 header = (struct image_header *) 184 (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header)); 185 186 spl_parse_image_header(header); 187 } 188 189 return 0; 190 } 191 #endif 192 193 int spl_init(void) 194 { 195 int ret; 196 197 debug("spl_init()\n"); 198 #if defined(CONFIG_SYS_MALLOC_F_LEN) 199 #ifdef CONFIG_MALLOC_F_ADDR 200 gd->malloc_base = CONFIG_MALLOC_F_ADDR; 201 #endif 202 gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN; 203 gd->malloc_ptr = 0; 204 #endif 205 if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) { 206 ret = fdtdec_setup(); 207 if (ret) { 208 debug("fdtdec_setup() returned error %d\n", ret); 209 return ret; 210 } 211 } 212 if (IS_ENABLED(CONFIG_SPL_DM)) { 213 /* With CONFIG_OF_PLATDATA, bring in all devices */ 214 ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA)); 215 if (ret) { 216 debug("dm_init_and_scan() returned error %d\n", ret); 217 return ret; 218 } 219 } 220 gd->flags |= GD_FLG_SPL_INIT; 221 222 return 0; 223 } 224 225 #ifndef BOOT_DEVICE_NONE 226 #define BOOT_DEVICE_NONE 0xdeadbeef 227 #endif 228 229 static u32 spl_boot_list[] = { 230 BOOT_DEVICE_NONE, 231 BOOT_DEVICE_NONE, 232 BOOT_DEVICE_NONE, 233 BOOT_DEVICE_NONE, 234 BOOT_DEVICE_NONE, 235 }; 236 237 __weak void board_boot_order(u32 *spl_boot_list) 238 { 239 spl_boot_list[0] = spl_boot_device(); 240 } 241 242 #ifdef CONFIG_SPL_BOARD_LOAD_IMAGE 243 __weak void spl_board_announce_boot_device(void) { } 244 #endif 245 246 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT 247 struct boot_device_name { 248 u32 boot_dev; 249 const char *name; 250 }; 251 252 struct boot_device_name boot_name_table[] = { 253 #ifdef CONFIG_SPL_RAM_DEVICE 254 { BOOT_DEVICE_RAM, "RAM" }, 255 #endif 256 #ifdef CONFIG_SPL_MMC_SUPPORT 257 { BOOT_DEVICE_MMC1, "MMC1" }, 258 { BOOT_DEVICE_MMC2, "MMC2" }, 259 { BOOT_DEVICE_MMC2_2, "MMC2_2" }, 260 #endif 261 #ifdef CONFIG_SPL_NAND_SUPPORT 262 { BOOT_DEVICE_NAND, "NAND" }, 263 #endif 264 #ifdef CONFIG_SPL_ONENAND_SUPPORT 265 { BOOT_DEVICE_ONENAND, "OneNAND" }, 266 #endif 267 #ifdef CONFIG_SPL_NOR_SUPPORT 268 { BOOT_DEVICE_NOR, "NOR" }, 269 #endif 270 #ifdef CONFIG_SPL_YMODEM_SUPPORT 271 { BOOT_DEVICE_UART, "UART" }, 272 #endif 273 #if defined(CONFIG_SPL_SPI_SUPPORT) || defined(CONFIG_SPL_SPI_FLASH_SUPPORT) 274 { BOOT_DEVICE_SPI, "SPI" }, 275 #endif 276 #ifdef CONFIG_SPL_ETH_SUPPORT 277 #ifdef CONFIG_SPL_ETH_DEVICE 278 { BOOT_DEVICE_CPGMAC, "eth device" }, 279 #else 280 { BOOT_DEVICE_CPGMAC, "net" }, 281 #endif 282 #endif 283 #ifdef CONFIG_SPL_USBETH_SUPPORT 284 { BOOT_DEVICE_USBETH, "USB eth" }, 285 #endif 286 #ifdef CONFIG_SPL_USB_SUPPORT 287 { BOOT_DEVICE_USB, "USB" }, 288 #endif 289 #ifdef CONFIG_SPL_SATA_SUPPORT 290 { BOOT_DEVICE_SATA, "SATA" }, 291 #endif 292 /* Keep this entry last */ 293 { BOOT_DEVICE_NONE, "unknown boot device" }, 294 }; 295 296 static void announce_boot_device(u32 boot_device) 297 { 298 int i; 299 300 puts("Trying to boot from "); 301 302 #ifdef CONFIG_SPL_BOARD_LOAD_IMAGE 303 if (boot_device == BOOT_DEVICE_BOARD) { 304 spl_board_announce_boot_device(); 305 puts("\n"); 306 return; 307 } 308 #endif 309 for (i = 0; i < ARRAY_SIZE(boot_name_table) - 1; i++) { 310 if (boot_name_table[i].boot_dev == boot_device) 311 break; 312 } 313 314 printf("%s\n", boot_name_table[i].name); 315 } 316 #else 317 static inline void announce_boot_device(u32 boot_device) { } 318 #endif 319 320 static int spl_load_image(u32 boot_device) 321 { 322 switch (boot_device) { 323 #ifdef CONFIG_SPL_RAM_DEVICE 324 case BOOT_DEVICE_RAM: 325 return spl_ram_load_image(); 326 #endif 327 #ifdef CONFIG_SPL_MMC_SUPPORT 328 case BOOT_DEVICE_MMC1: 329 case BOOT_DEVICE_MMC2: 330 case BOOT_DEVICE_MMC2_2: 331 return spl_mmc_load_image(boot_device); 332 #endif 333 #ifdef CONFIG_SPL_UBI 334 case BOOT_DEVICE_NAND: 335 case BOOT_DEVICE_ONENAND: 336 return spl_ubi_load_image(boot_device); 337 #else 338 #ifdef CONFIG_SPL_NAND_SUPPORT 339 case BOOT_DEVICE_NAND: 340 return spl_nand_load_image(); 341 #endif 342 #ifdef CONFIG_SPL_ONENAND_SUPPORT 343 case BOOT_DEVICE_ONENAND: 344 return spl_onenand_load_image(); 345 #endif 346 #endif 347 #ifdef CONFIG_SPL_NOR_SUPPORT 348 case BOOT_DEVICE_NOR: 349 return spl_nor_load_image(); 350 #endif 351 #ifdef CONFIG_SPL_YMODEM_SUPPORT 352 case BOOT_DEVICE_UART: 353 return spl_ymodem_load_image(); 354 #endif 355 #if defined(CONFIG_SPL_SPI_SUPPORT) || defined(CONFIG_SPL_SPI_FLASH_SUPPORT) 356 case BOOT_DEVICE_SPI: 357 return spl_spi_load_image(); 358 #endif 359 #ifdef CONFIG_SPL_ETH_SUPPORT 360 case BOOT_DEVICE_CPGMAC: 361 #ifdef CONFIG_SPL_ETH_DEVICE 362 return spl_net_load_image(CONFIG_SPL_ETH_DEVICE); 363 #else 364 return spl_net_load_image(NULL); 365 #endif 366 #endif 367 #ifdef CONFIG_SPL_USBETH_SUPPORT 368 case BOOT_DEVICE_USBETH: 369 return spl_net_load_image("usb_ether"); 370 #endif 371 #ifdef CONFIG_SPL_USB_SUPPORT 372 case BOOT_DEVICE_USB: 373 return spl_usb_load_image(); 374 #endif 375 #ifdef CONFIG_SPL_SATA_SUPPORT 376 case BOOT_DEVICE_SATA: 377 return spl_sata_load_image(); 378 #endif 379 #ifdef CONFIG_SPL_BOARD_LOAD_IMAGE 380 case BOOT_DEVICE_BOARD: 381 return spl_board_load_image(); 382 #endif 383 default: 384 #if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 385 puts("SPL: Unsupported Boot Device!\n"); 386 #endif 387 return -ENODEV; 388 } 389 390 return -EINVAL; 391 } 392 393 void board_init_r(gd_t *dummy1, ulong dummy2) 394 { 395 int i; 396 397 debug(">>spl:board_init_r()\n"); 398 399 #if defined(CONFIG_SYS_SPL_MALLOC_START) 400 mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, 401 CONFIG_SYS_SPL_MALLOC_SIZE); 402 gd->flags |= GD_FLG_FULL_MALLOC_INIT; 403 #endif 404 if (!(gd->flags & GD_FLG_SPL_INIT)) { 405 if (spl_init()) 406 hang(); 407 } 408 #ifndef CONFIG_PPC 409 /* 410 * timer_init() does not exist on PPC systems. The timer is initialized 411 * and enabled (decrementer) in interrupt_init() here. 412 */ 413 timer_init(); 414 #endif 415 416 #ifdef CONFIG_SPL_BOARD_INIT 417 spl_board_init(); 418 #endif 419 420 board_boot_order(spl_boot_list); 421 for (i = 0; i < ARRAY_SIZE(spl_boot_list) && 422 spl_boot_list[i] != BOOT_DEVICE_NONE; i++) { 423 announce_boot_device(spl_boot_list[i]); 424 if (!spl_load_image(spl_boot_list[i])) 425 break; 426 } 427 428 if (i == ARRAY_SIZE(spl_boot_list) || 429 spl_boot_list[i] == BOOT_DEVICE_NONE) { 430 puts("SPL: failed to boot from all boot devices\n"); 431 hang(); 432 } 433 434 switch (spl_image.os) { 435 case IH_OS_U_BOOT: 436 debug("Jumping to U-Boot\n"); 437 break; 438 #ifdef CONFIG_SPL_OS_BOOT 439 case IH_OS_LINUX: 440 debug("Jumping to Linux\n"); 441 spl_board_prepare_for_linux(); 442 jump_to_image_linux((void *)CONFIG_SYS_SPL_ARGS_ADDR); 443 #endif 444 default: 445 debug("Unsupported OS image.. Jumping nevertheless..\n"); 446 } 447 #if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE) 448 debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr, 449 gd->malloc_ptr / 1024); 450 #endif 451 452 debug("loaded - jumping to U-Boot..."); 453 spl_board_prepare_for_boot(); 454 jump_to_image_no_args(&spl_image); 455 } 456 457 /* 458 * This requires UART clocks to be enabled. In order for this to work the 459 * caller must ensure that the gd pointer is valid. 460 */ 461 void preloader_console_init(void) 462 { 463 gd->bd = &bdata; 464 gd->baudrate = CONFIG_BAUDRATE; 465 466 serial_init(); /* serial communications setup */ 467 468 gd->have_console = 1; 469 470 puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \ 471 U_BOOT_TIME ")\n"); 472 #ifdef CONFIG_SPL_DISPLAY_PRINT 473 spl_display_print(); 474 #endif 475 } 476 477 /** 478 * spl_relocate_stack_gd() - Relocate stack ready for board_init_r() execution 479 * 480 * Sometimes board_init_f() runs with a stack in SRAM but we want to use SDRAM 481 * for the main board_init_r() execution. This is typically because we need 482 * more stack space for things like the MMC sub-system. 483 * 484 * This function calculates the stack position, copies the global_data into 485 * place, sets the new gd (except for ARM, for which setting GD within a C 486 * function may not always work) and returns the new stack position. The 487 * caller is responsible for setting up the sp register and, in the case 488 * of ARM, setting up gd. 489 * 490 * All of this is done using the same layout and alignments as done in 491 * board_init_f_init_reserve() / board_init_f_alloc_reserve(). 492 * 493 * @return new stack location, or 0 to use the same stack 494 */ 495 ulong spl_relocate_stack_gd(void) 496 { 497 #ifdef CONFIG_SPL_STACK_R 498 gd_t *new_gd; 499 ulong ptr = CONFIG_SPL_STACK_R_ADDR; 500 501 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE 502 if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) { 503 ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; 504 gd->malloc_base = ptr; 505 gd->malloc_limit = CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; 506 gd->malloc_ptr = 0; 507 } 508 #endif 509 /* Get stack position: use 8-byte alignment for ABI compliance */ 510 ptr = CONFIG_SPL_STACK_R_ADDR - roundup(sizeof(gd_t),16); 511 new_gd = (gd_t *)ptr; 512 memcpy(new_gd, (void *)gd, sizeof(gd_t)); 513 #if !defined(CONFIG_ARM) 514 gd = new_gd; 515 #endif 516 return ptr; 517 #else 518 return 0; 519 #endif 520 } 521