1 /* 2 * (C) Copyright 2010 3 * Texas Instruments, <www.ti.com> 4 * 5 * Aneesh V <aneesh@ti.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 #include <common.h> 10 #include <dm.h> 11 #include <spl.h> 12 #include <asm/u-boot.h> 13 #include <nand.h> 14 #include <fat.h> 15 #include <version.h> 16 #include <image.h> 17 #include <malloc.h> 18 #include <dm/root.h> 19 #include <linux/compiler.h> 20 21 DECLARE_GLOBAL_DATA_PTR; 22 23 #ifndef CONFIG_SYS_UBOOT_START 24 #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE 25 #endif 26 #ifndef CONFIG_SYS_MONITOR_LEN 27 /* Unknown U-Boot size, let's assume it will not be more than 200 KB */ 28 #define CONFIG_SYS_MONITOR_LEN (200 * 1024) 29 #endif 30 31 u32 *boot_params_ptr = NULL; 32 33 /* Define board data structure */ 34 static bd_t bdata __attribute__ ((section(".data"))); 35 36 /* 37 * Board-specific Platform code can reimplement show_boot_progress () if needed 38 */ 39 __weak void show_boot_progress(int val) {} 40 41 /* 42 * Default function to determine if u-boot or the OS should 43 * be started. This implementation always returns 1. 44 * 45 * Please implement your own board specific funcion to do this. 46 * 47 * RETURN 48 * 0 to not start u-boot 49 * positive if u-boot should start 50 */ 51 #ifdef CONFIG_SPL_OS_BOOT 52 __weak int spl_start_uboot(void) 53 { 54 puts("SPL: Please implement spl_start_uboot() for your board\n"); 55 puts("SPL: Direct Linux boot not active!\n"); 56 return 1; 57 } 58 59 /* 60 * Weak default function for arch specific zImage check. Return zero 61 * and fill start and end address if image is recognized. 62 */ 63 int __weak bootz_setup(ulong image, ulong *start, ulong *end) 64 { 65 return 1; 66 } 67 #endif 68 69 /* 70 * Weak default function for board specific cleanup/preparation before 71 * Linux boot. Some boards/platforms might not need it, so just provide 72 * an empty stub here. 73 */ 74 __weak void spl_board_prepare_for_linux(void) 75 { 76 /* Nothing to do! */ 77 } 78 79 __weak void spl_board_prepare_for_boot(void) 80 { 81 /* Nothing to do! */ 82 } 83 84 void spl_set_header_raw_uboot(struct spl_image_info *spl_image) 85 { 86 spl_image->size = CONFIG_SYS_MONITOR_LEN; 87 spl_image->entry_point = CONFIG_SYS_UBOOT_START; 88 spl_image->load_addr = CONFIG_SYS_TEXT_BASE; 89 spl_image->os = IH_OS_U_BOOT; 90 spl_image->name = "U-Boot"; 91 } 92 93 int spl_parse_image_header(struct spl_image_info *spl_image, 94 const struct image_header *header) 95 { 96 u32 header_size = sizeof(struct image_header); 97 98 if (image_get_magic(header) == IH_MAGIC) { 99 if (spl_image->flags & SPL_COPY_PAYLOAD_ONLY) { 100 /* 101 * On some system (e.g. powerpc), the load-address and 102 * entry-point is located at address 0. We can't load 103 * to 0-0x40. So skip header in this case. 104 */ 105 spl_image->load_addr = image_get_load(header); 106 spl_image->entry_point = image_get_ep(header); 107 spl_image->size = image_get_data_size(header); 108 } else { 109 spl_image->entry_point = image_get_load(header); 110 /* Load including the header */ 111 spl_image->load_addr = spl_image->entry_point - 112 header_size; 113 spl_image->size = image_get_data_size(header) + 114 header_size; 115 } 116 spl_image->os = image_get_os(header); 117 spl_image->name = image_get_name(header); 118 debug("spl: payload image: %.*s load addr: 0x%lx size: %d\n", 119 (int)sizeof(spl_image->name), spl_image->name, 120 spl_image->load_addr, spl_image->size); 121 } else { 122 #ifdef CONFIG_SPL_PANIC_ON_RAW_IMAGE 123 /* 124 * CONFIG_SPL_PANIC_ON_RAW_IMAGE is defined when the 125 * code which loads images in SPL cannot guarantee that 126 * absolutely all read errors will be reported. 127 * An example is the LPC32XX MLC NAND driver, which 128 * will consider that a completely unreadable NAND block 129 * is bad, and thus should be skipped silently. 130 */ 131 panic("** no mkimage signature but raw image not supported"); 132 #endif 133 134 #ifdef CONFIG_SPL_OS_BOOT 135 ulong start, end; 136 137 if (!bootz_setup((ulong)header, &start, &end)) { 138 spl_image->name = "Linux"; 139 spl_image->os = IH_OS_LINUX; 140 spl_image->load_addr = CONFIG_SYS_LOAD_ADDR; 141 spl_image->entry_point = CONFIG_SYS_LOAD_ADDR; 142 spl_image->size = end - start; 143 debug("spl: payload zImage, load addr: 0x%lx size: %d\n", 144 spl_image->load_addr, spl_image->size); 145 return 0; 146 } 147 #endif 148 149 #ifdef CONFIG_SPL_ABORT_ON_RAW_IMAGE 150 /* Signature not found, proceed to other boot methods. */ 151 return -EINVAL; 152 #else 153 /* Signature not found - assume u-boot.bin */ 154 debug("mkimage signature not found - ih_magic = %x\n", 155 header->ih_magic); 156 spl_set_header_raw_uboot(spl_image); 157 #endif 158 } 159 return 0; 160 } 161 162 __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) 163 { 164 typedef void __noreturn (*image_entry_noargs_t)(void); 165 166 image_entry_noargs_t image_entry = 167 (image_entry_noargs_t)spl_image->entry_point; 168 169 debug("image entry point: 0x%lX\n", spl_image->entry_point); 170 image_entry(); 171 } 172 173 int spl_init(void) 174 { 175 int ret; 176 177 debug("spl_init()\n"); 178 #if defined(CONFIG_SYS_MALLOC_F_LEN) 179 #ifdef CONFIG_MALLOC_F_ADDR 180 gd->malloc_base = CONFIG_MALLOC_F_ADDR; 181 #endif 182 gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN; 183 gd->malloc_ptr = 0; 184 #endif 185 if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) { 186 ret = fdtdec_setup(); 187 if (ret) { 188 debug("fdtdec_setup() returned error %d\n", ret); 189 return ret; 190 } 191 } 192 if (IS_ENABLED(CONFIG_SPL_DM)) { 193 /* With CONFIG_SPL_OF_PLATDATA, bring in all devices */ 194 ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA)); 195 if (ret) { 196 debug("dm_init_and_scan() returned error %d\n", ret); 197 return ret; 198 } 199 } 200 gd->flags |= GD_FLG_SPL_INIT; 201 202 return 0; 203 } 204 205 #ifndef BOOT_DEVICE_NONE 206 #define BOOT_DEVICE_NONE 0xdeadbeef 207 #endif 208 209 __weak void board_boot_order(u32 *spl_boot_list) 210 { 211 spl_boot_list[0] = spl_boot_device(); 212 } 213 214 static struct spl_image_loader *spl_ll_find_loader(uint boot_device) 215 { 216 struct spl_image_loader *drv = 217 ll_entry_start(struct spl_image_loader, spl_image_loader); 218 const int n_ents = 219 ll_entry_count(struct spl_image_loader, spl_image_loader); 220 struct spl_image_loader *entry; 221 222 for (entry = drv; entry != drv + n_ents; entry++) { 223 if (boot_device == entry->boot_device) 224 return entry; 225 } 226 227 /* Not found */ 228 return NULL; 229 } 230 231 static int spl_load_image(struct spl_image_info *spl_image, 232 struct spl_image_loader *loader) 233 { 234 struct spl_boot_device bootdev; 235 236 bootdev.boot_device = loader->boot_device; 237 bootdev.boot_device_name = NULL; 238 239 return loader->load_image(spl_image, &bootdev); 240 } 241 242 /** 243 * boot_from_devices() - Try loading an booting U-Boot from a list of devices 244 * 245 * @spl_image: Place to put the image details if successful 246 * @spl_boot_list: List of boot devices to try 247 * @count: Number of elements in spl_boot_list 248 * @return 0 if OK, -ve on error 249 */ 250 static int boot_from_devices(struct spl_image_info *spl_image, 251 u32 spl_boot_list[], int count) 252 { 253 int i; 254 255 for (i = 0; i < count && spl_boot_list[i] != BOOT_DEVICE_NONE; i++) { 256 struct spl_image_loader *loader; 257 258 loader = spl_ll_find_loader(spl_boot_list[i]); 259 #if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 260 if (loader) 261 printf("Trying to boot from %s", loader->name); 262 else 263 puts("SPL: Unsupported Boot Device!\n"); 264 #endif 265 if (loader && !spl_load_image(spl_image, loader)) 266 return 0; 267 } 268 269 return -ENODEV; 270 } 271 272 void board_init_r(gd_t *dummy1, ulong dummy2) 273 { 274 u32 spl_boot_list[] = { 275 BOOT_DEVICE_NONE, 276 BOOT_DEVICE_NONE, 277 BOOT_DEVICE_NONE, 278 BOOT_DEVICE_NONE, 279 BOOT_DEVICE_NONE, 280 }; 281 struct spl_image_info spl_image; 282 283 debug(">>spl:board_init_r()\n"); 284 285 #if defined(CONFIG_SYS_SPL_MALLOC_START) 286 mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, 287 CONFIG_SYS_SPL_MALLOC_SIZE); 288 gd->flags |= GD_FLG_FULL_MALLOC_INIT; 289 #endif 290 if (!(gd->flags & GD_FLG_SPL_INIT)) { 291 if (spl_init()) 292 hang(); 293 } 294 #ifndef CONFIG_PPC 295 /* 296 * timer_init() does not exist on PPC systems. The timer is initialized 297 * and enabled (decrementer) in interrupt_init() here. 298 */ 299 timer_init(); 300 #endif 301 302 #ifdef CONFIG_SPL_BOARD_INIT 303 spl_board_init(); 304 #endif 305 306 memset(&spl_image, '\0', sizeof(spl_image)); 307 board_boot_order(spl_boot_list); 308 309 if (boot_from_devices(&spl_image, spl_boot_list, 310 ARRAY_SIZE(spl_boot_list))) { 311 puts("SPL: failed to boot from all boot devices\n"); 312 hang(); 313 } 314 315 switch (spl_image.os) { 316 case IH_OS_U_BOOT: 317 debug("Jumping to U-Boot\n"); 318 break; 319 #ifdef CONFIG_SPL_OS_BOOT 320 case IH_OS_LINUX: 321 debug("Jumping to Linux\n"); 322 spl_board_prepare_for_linux(); 323 jump_to_image_linux(&spl_image, 324 (void *)CONFIG_SYS_SPL_ARGS_ADDR); 325 #endif 326 default: 327 debug("Unsupported OS image.. Jumping nevertheless..\n"); 328 } 329 #if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE) 330 debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr, 331 gd->malloc_ptr / 1024); 332 #endif 333 334 debug("loaded - jumping to U-Boot..."); 335 spl_board_prepare_for_boot(); 336 jump_to_image_no_args(&spl_image); 337 } 338 339 /* 340 * This requires UART clocks to be enabled. In order for this to work the 341 * caller must ensure that the gd pointer is valid. 342 */ 343 void preloader_console_init(void) 344 { 345 gd->bd = &bdata; 346 gd->baudrate = CONFIG_BAUDRATE; 347 348 serial_init(); /* serial communications setup */ 349 350 gd->have_console = 1; 351 352 puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \ 353 U_BOOT_TIME ")\n"); 354 #ifdef CONFIG_SPL_DISPLAY_PRINT 355 spl_display_print(); 356 #endif 357 } 358 359 /** 360 * spl_relocate_stack_gd() - Relocate stack ready for board_init_r() execution 361 * 362 * Sometimes board_init_f() runs with a stack in SRAM but we want to use SDRAM 363 * for the main board_init_r() execution. This is typically because we need 364 * more stack space for things like the MMC sub-system. 365 * 366 * This function calculates the stack position, copies the global_data into 367 * place, sets the new gd (except for ARM, for which setting GD within a C 368 * function may not always work) and returns the new stack position. The 369 * caller is responsible for setting up the sp register and, in the case 370 * of ARM, setting up gd. 371 * 372 * All of this is done using the same layout and alignments as done in 373 * board_init_f_init_reserve() / board_init_f_alloc_reserve(). 374 * 375 * @return new stack location, or 0 to use the same stack 376 */ 377 ulong spl_relocate_stack_gd(void) 378 { 379 #ifdef CONFIG_SPL_STACK_R 380 gd_t *new_gd; 381 ulong ptr = CONFIG_SPL_STACK_R_ADDR; 382 383 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE 384 if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) { 385 ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; 386 gd->malloc_base = ptr; 387 gd->malloc_limit = CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; 388 gd->malloc_ptr = 0; 389 } 390 #endif 391 /* Get stack position: use 8-byte alignment for ABI compliance */ 392 ptr = CONFIG_SPL_STACK_R_ADDR - roundup(sizeof(gd_t),16); 393 new_gd = (gd_t *)ptr; 394 memcpy(new_gd, (void *)gd, sizeof(gd_t)); 395 #if CONFIG_IS_ENABLED(DM) 396 dm_fixup_for_gd_move(new_gd); 397 #endif 398 #if !defined(CONFIG_ARM) 399 gd = new_gd; 400 #endif 401 return ptr; 402 #else 403 return 0; 404 #endif 405 } 406