xref: /rk3399_ARM-atf/plat/st/stm32mp1/stm32mp1_dbgmcu.c (revision a24d5947af5921beab566e7f9e9d23e2f9dd9072)

/*
 * Copyright (c) 2016-2021, STMicroelectronics - All Rights Reserved
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <assert.h>
#include <errno.h>

#include <platform_def.h>

#include <common/debug.h>
#include <drivers/st/bsec.h>
#include <drivers/st/stm32mp1_rcc.h>
#include <lib/mmio.h>
#include <lib/utils_def.h>

#include <stm32mp1_dbgmcu.h>

#define DBGMCU_IDC		U(0x00)
#define DBGMCU_APB4FZ1		U(0x2C)

#define DBGMCU_IDC_DEV_ID_MASK	GENMASK(11, 0)
#define DBGMCU_IDC_REV_ID_MASK	GENMASK(31, 16)
#define DBGMCU_IDC_REV_ID_SHIFT	16

#define DBGMCU_APB4FZ1_IWDG2	BIT(2)

static int stm32mp1_dbgmcu_init(void)
{
	uint32_t dbg_conf;

	dbg_conf = bsec_read_debug_conf();

	if ((dbg_conf & BSEC_DBGSWGEN) == 0U) {
		uint32_t result = bsec_write_debug_conf(dbg_conf |
							BSEC_DBGSWGEN);

		if (result != BSEC_OK) {
			ERROR("Error enabling DBGSWGEN\n");
			return -1;
		}
	}

	mmio_setbits_32(RCC_BASE + RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);

	return 0;
}

/*
 * @brief  Get silicon revision from DBGMCU registers.
 * @param  chip_version: pointer to the read value.
 * @retval 0 on success, negative value on failure.
 */
int stm32mp1_dbgmcu_get_chip_version(uint32_t *chip_version)
{
	assert(chip_version != NULL);

	if (stm32mp1_dbgmcu_init() != 0) {
		return -EPERM;
	}

	*chip_version = (mmio_read_32(DBGMCU_BASE + DBGMCU_IDC) &
			 DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;

	return 0;
}

/*
 * @brief  Get device ID from DBGMCU registers.
 * @param  chip_dev_id: pointer to the read value.
 * @retval 0 on success, negative value on failure.
 */
int stm32mp1_dbgmcu_get_chip_dev_id(uint32_t *chip_dev_id)
{
	assert(chip_dev_id != NULL);

	if (stm32mp1_dbgmcu_init() != 0) {
		return -EPERM;
	}

	*chip_dev_id = mmio_read_32(DBGMCU_BASE + DBGMCU_IDC) &
		       DBGMCU_IDC_DEV_ID_MASK;

	return 0;
}

/*
 * @brief  Freeze IWDG2 in debug mode.
 * @retval None.
 */
int stm32mp1_dbgmcu_freeze_iwdg2(void)
{
	uint32_t dbg_conf;

	if (stm32mp1_dbgmcu_init() != 0) {
		return -EPERM;
	}

	dbg_conf = bsec_read_debug_conf();

	if ((dbg_conf & (BSEC_SPIDEN | BSEC_SPINDEN)) != 0U) {
		mmio_setbits_32(DBGMCU_BASE + DBGMCU_APB4FZ1,
				DBGMCU_APB4FZ1_IWDG2);
	}

	return 0;
}