xref: /rk3399_ARM-atf/plat/mediatek/mt8195/include/platform_def.h (revision 174a1cfecd2a6e42ca0a7cbfbc6ab4eadf5830e2)
1 /*
2  * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #ifndef PLATFORM_DEF_H
8 #define PLATFORM_DEF_H
9 
10 #define PLAT_PRIMARY_CPU	0x0
11 
12 #define MT_GIC_BASE		(0x0C000000)
13 #define MCUCFG_BASE		(0x0C530000)
14 #define IO_PHYS			(0x10000000)
15 
16 /* Aggregate of all devices for MMU mapping */
17 #define MTK_DEV_RNG0_BASE	IO_PHYS
18 #define MTK_DEV_RNG0_SIZE	0x400000
19 #define MTK_DEV_RNG1_BASE	(IO_PHYS + 0x1000000)
20 #define MTK_DEV_RNG1_SIZE	0xa110000
21 #define MTK_DEV_RNG2_BASE	MT_GIC_BASE
22 #define MTK_DEV_RNG2_SIZE	0x600000
23 
24 
25 /*******************************************************************************
26  * UART related constants
27  ******************************************************************************/
28 #define UART0_BASE			(IO_PHYS + 0x01001100)
29 #define UART1_BASE			(IO_PHYS + 0x01001200)
30 
31 #define UART_BAUDRATE			115200
32 
33 /*******************************************************************************
34  * System counter frequency related constants
35  ******************************************************************************/
36 #define SYS_COUNTER_FREQ_IN_TICKS	13000000
37 #define SYS_COUNTER_FREQ_IN_MHZ		13
38 
39 /*******************************************************************************
40  * Platform binary types for linking
41  ******************************************************************************/
42 #define PLATFORM_LINKER_FORMAT		"elf64-littleaarch64"
43 #define PLATFORM_LINKER_ARCH		aarch64
44 
45 /*******************************************************************************
46  * Generic platform constants
47  ******************************************************************************/
48 #define PLATFORM_STACK_SIZE		0x800
49 
50 #define FIRMWARE_WELCOME_STR		"Booting Trusted Firmware\n"
51 
52 #define PLAT_MAX_PWR_LVL		U(3)
53 #define PLAT_MAX_RET_STATE		U(1)
54 #define PLAT_MAX_OFF_STATE		U(9)
55 
56 #define PLATFORM_SYSTEM_COUNT		U(1)
57 #define PLATFORM_MCUSYS_COUNT		U(1)
58 #define PLATFORM_CLUSTER_COUNT		U(1)
59 #define PLATFORM_CLUSTER0_CORE_COUNT	U(8)
60 #define PLATFORM_CLUSTER1_CORE_COUNT	U(0)
61 
62 #define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER0_CORE_COUNT)
63 #define PLATFORM_MAX_CPUS_PER_CLUSTER	U(8)
64 
65 #define SOC_CHIP_ID			U(0x8195)
66 
67 /*******************************************************************************
68  * Platform memory map related constants
69  ******************************************************************************/
70 #define TZRAM_BASE			0x54600000
71 #define TZRAM_SIZE			0x00030000
72 
73 /*******************************************************************************
74  * BL31 specific defines.
75  ******************************************************************************/
76 /*
77  * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if
78  * present). BL31_BASE is calculated using the current BL3-1 debug size plus a
79  * little space for growth.
80  */
81 #define BL31_BASE			(TZRAM_BASE + 0x1000)
82 #define BL31_LIMIT			(TZRAM_BASE + TZRAM_SIZE)
83 
84 /*******************************************************************************
85  * Platform specific page table and MMU setup constants
86  ******************************************************************************/
87 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
88 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
89 #define MAX_XLAT_TABLES			16
90 #define MAX_MMAP_REGIONS		16
91 
92 /*******************************************************************************
93  * Declarations and constants to access the mailboxes safely. Each mailbox is
94  * aligned on the biggest cache line size in the platform. This is known only
95  * to the platform as it might have a combination of integrated and external
96  * caches. Such alignment ensures that two maiboxes do not sit on the same cache
97  * line at any cache level. They could belong to different cpus/clusters &
98  * get written while being protected by different locks causing corruption of
99  * a valid mailbox address.
100  ******************************************************************************/
101 #define CACHE_WRITEBACK_SHIFT		6
102 #define CACHE_WRITEBACK_GRANULE		(1 << CACHE_WRITEBACK_SHIFT)
103 #endif /* PLATFORM_DEF_H */
104