xref: /rk3399_ARM-atf/plat/mediatek/mt8173/platform.mk (revision 6331a31a66cdcf53421d3dccd3067f072c6da175)
1#
2# Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
3#
4# Redistribution and use in source and binary forms, with or without
5# modification, are permitted provided that the following conditions are met:
6#
7# Redistributions of source code must retain the above copyright notice, this
8# list of conditions and the following disclaimer.
9#
10# Redistributions in binary form must reproduce the above copyright notice,
11# this list of conditions and the following disclaimer in the documentation
12# and/or other materials provided with the distribution.
13#
14# Neither the name of ARM nor the names of its contributors may be used
15# to endorse or promote products derived from this software without specific
16# prior written permission.
17#
18# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28# POSSIBILITY OF SUCH DAMAGE.
29#
30
31MTK_PLAT		:=	plat/mediatek
32MTK_PLAT_SOC		:=	${MTK_PLAT}/${PLAT}
33
34PLAT_INCLUDES		:=	-I${MTK_PLAT}/common/				\
35				-I${MTK_PLAT_SOC}/drivers/crypt/		\
36				-I${MTK_PLAT_SOC}/drivers/mtcmos/		\
37				-I${MTK_PLAT_SOC}/drivers/pmic/			\
38				-I${MTK_PLAT_SOC}/drivers/rtc/			\
39				-I${MTK_PLAT_SOC}/drivers/spm/			\
40				-I${MTK_PLAT_SOC}/drivers/timer/		\
41				-I${MTK_PLAT_SOC}/drivers/uart/			\
42				-I${MTK_PLAT_SOC}/include/
43
44PLAT_BL_COMMON_SOURCES	:=	lib/xlat_tables/xlat_tables_common.c		\
45				lib/xlat_tables/aarch64/xlat_tables.c		\
46				plat/common/aarch64/plat_common.c		\
47				plat/common/plat_gic.c
48
49BL31_SOURCES		+=	drivers/arm/cci/cci.c				\
50				drivers/arm/gic/arm_gic.c			\
51				drivers/arm/gic/gic_v2.c			\
52				drivers/arm/gic/gic_v3.c			\
53				drivers/console/console.S			\
54				drivers/delay_timer/delay_timer.c		\
55				drivers/delay_timer/generic_delay_timer.c	\
56				lib/cpus/aarch64/aem_generic.S			\
57				lib/cpus/aarch64/cortex_a53.S			\
58				lib/cpus/aarch64/cortex_a57.S			\
59				lib/cpus/aarch64/cortex_a72.S			\
60				plat/common/aarch64/platform_mp_stack.S		\
61				${MTK_PLAT}/common/mtk_plat_common.c		\
62				${MTK_PLAT}/common/mtk_sip_svc.c		\
63				${MTK_PLAT_SOC}/aarch64/plat_helpers.S		\
64				${MTK_PLAT_SOC}/aarch64/platform_common.c	\
65				${MTK_PLAT_SOC}/bl31_plat_setup.c		\
66				${MTK_PLAT_SOC}/drivers/crypt/crypt.c		\
67				${MTK_PLAT_SOC}/drivers/mtcmos/mtcmos.c		\
68				${MTK_PLAT_SOC}/drivers/pmic/pmic_wrap_init.c	\
69				${MTK_PLAT_SOC}/drivers/rtc/rtc.c		\
70				${MTK_PLAT_SOC}/drivers/spm/spm.c		\
71				${MTK_PLAT_SOC}/drivers/spm/spm_hotplug.c	\
72				${MTK_PLAT_SOC}/drivers/spm/spm_mcdi.c		\
73				${MTK_PLAT_SOC}/drivers/spm/spm_suspend.c	\
74				${MTK_PLAT_SOC}/drivers/timer/mt_cpuxgpt.c	\
75				${MTK_PLAT_SOC}/drivers/uart/8250_console.S	\
76				${MTK_PLAT_SOC}/plat_mt_gic.c			\
77				${MTK_PLAT_SOC}/plat_pm.c			\
78				${MTK_PLAT_SOC}/plat_sip_calls.c		\
79				${MTK_PLAT_SOC}/plat_topology.c			\
80				${MTK_PLAT_SOC}/power_tracer.c			\
81				${MTK_PLAT_SOC}/scu.c
82
83# Flag used by the MTK_platform port to determine the version of ARM GIC
84# architecture to use for interrupt management in EL3.
85ARM_GIC_ARCH		:=	2
86$(eval $(call add_define,ARM_GIC_ARCH))
87
88# Enable workarounds for selected Cortex-A53 erratas.
89ERRATA_A53_826319	:=	1
90ERRATA_A53_836870	:=	1
91
92# indicate the reset vector address can be programmed
93PROGRAMMABLE_RESET_ADDRESS	:=	1
94
95$(eval $(call add_define,MTK_SIP_SET_AUTHORIZED_SECURE_REG_ENABLE))
96