xref: /rk3399_ARM-atf/plat/intel/soc/stratix10/include/socfpga_plat_def.h (revision 33ddc01ac5d04377d8f65b18109dabfbe7254488)

/*
 * Copyright (c) 2019-2023, ARM Limited and Contributors. All rights reserved.
 * Copyright (c) 2024, Altera Corporation. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef PLAT_SOCFPGA_DEF_H
#define PLAT_SOCFPGA_DEF_H

#include <platform_def.h>
#include <lib/utils_def.h>
#include "s10_system_manager.h"

/* Platform Setting */
#define PLATFORM_MODEL				PLAT_SOCFPGA_STRATIX10
#define PLAT_PRIMARY_CPU			0
#define PLAT_CLUSTER_ID_MPIDR_AFF_SHIFT		MPIDR_AFF1_SHIFT
#define PLAT_CPU_ID_MPIDR_AFF_SHIFT		MPIDR_AFF0_SHIFT
#define PLAT_HANDOFF_OFFSET			0xFFE3F000
#define PLAT_TIMER_BASE_ADDR			0xFFD01000

/* FPGA config helpers */
#define INTEL_SIP_SMC_FPGA_CONFIG_ADDR		0x400000
#define INTEL_SIP_SMC_FPGA_CONFIG_SIZE		0x1000000

/* QSPI Setting */
#define CAD_QSPIDATA_OFST			0xff900000
#define CAD_QSPI_OFFSET				0xff8d2000

/* FIP Setting */
#define PLAT_FIP_BASE				(0)
#define PLAT_FIP_MAX_SIZE			(0x1000000)

/* SDMMC Setting */
#define PLAT_MMC_DATA_BASE			(0xffe3c000)
#define PLAT_MMC_DATA_SIZE			(0x2000)
#define SOCFPGA_MMC_BLOCK_SIZE			U(8192)

/* Register Mapping */
#define SOCFPGA_CCU_NOC_REG_BASE		0xf7000000
#define SOCFPGA_F2SDRAMMGR_REG_BASE		U(0xf8024000)

#define SOCFPGA_MMC_REG_BASE                    0xff808000

#define SOCFPGA_RSTMGR_REG_BASE			0xffd11000
#define SOCFPGA_SYSMGR_REG_BASE			0xffd12000
#define SOCFPGA_ECC_QSPI_REG_BASE		0xffa22000

#define SOCFPGA_L4_PER_SCR_REG_BASE		0xffd21000
#define SOCFPGA_L4_SYS_SCR_REG_BASE		0xffd21100
#define SOCFPGA_SOC2FPGA_SCR_REG_BASE		0xffd21200
#define SOCFPGA_LWSOC2FPGA_SCR_REG_BASE		0xffd21300

/*******************************************************************************
 * Platform memory map related constants
 ******************************************************************************/
#define DRAM_BASE				(0x0)
#define DRAM_SIZE				(0x80000000)

#define OCRAM_BASE				(0xFFE00000)
#define OCRAM_SIZE				(0x00040000)

#define MEM64_BASE				(0x0100000000)
#define MEM64_SIZE				(0x1F00000000)

#define DEVICE1_BASE				(0x80000000)
#define DEVICE1_SIZE				(0x60000000)

#define DEVICE2_BASE				(0xF7000000)
#define DEVICE2_SIZE				(0x08E00000)

#define DEVICE3_BASE				(0xFFFC0000)
#define DEVICE3_SIZE				(0x00008000)

#define DEVICE4_BASE				(0x2000000000)
#define DEVICE4_SIZE				(0x0100000000)

#define BL2_BASE				(0xffe00000)
#define BL2_LIMIT				(0xffe2b000)

#define BL31_BASE				(0x1000)
#define BL31_LIMIT				(0x81000)

/*******************************************************************************
 * UART related constants
 ******************************************************************************/
#define PLAT_UART0_BASE				(0xFFC02000)
#define PLAT_UART1_BASE				(0xFFC02100)

/*******************************************************************************
 * WDT related constants
 ******************************************************************************/
#define WDT_BASE				(0xFFD00200)

/*******************************************************************************
 * GIC related constants
 ******************************************************************************/
#define PLAT_GIC_BASE				(0xFFFC0000)
#define PLAT_GICC_BASE				(PLAT_GIC_BASE + 0x2000)
#define PLAT_GICD_BASE				(PLAT_GIC_BASE + 0x1000)
#define PLAT_GICR_BASE				0

#define PLAT_SYS_COUNTER_FREQ_IN_TICKS		(400000000)
#define PLAT_HZ_CONVERT_TO_MHZ			(1000000)

/*******************************************************************************
 * SDMMC related pointer function
 ******************************************************************************/
#define SDMMC_READ_BLOCKS			mmc_read_blocks
#define SDMMC_WRITE_BLOCKS			mmc_write_blocks

/*******************************************************************************
 * sysmgr.boot_scratch_cold6 Bits[3:0] is used to indicate L2 reset
 * is done and HPS should trigger warm reset via RMR_EL3.
 ******************************************************************************/
/*
 * Magic key bits: 4 bits[3:0] from boot scratch register COLD6 are used to
 * indicate the below requests/status
 *     0x0       : Default value on reset, not used
 *     0x1       : L2/warm reset is completed
 *     0x2 - 0xF : Reserved for future use
 */
#define BS_REG_MAGIC_KEYS_MASK			0xFFFFFFFF
#define L2_RESET_DONE_STATUS			0x1228E5E7

#define L2_RESET_DONE_REG			SOCFPGA_SYSMGR(BOOT_SCRATCH_COLD_6)

/* Platform specific system counter */
#define PLAT_SYS_COUNTER_FREQ_IN_MHZ		U(400)

#endif /* PLATSOCFPGA_DEF_H */