1 /* 2 * Copyright (c) 2019-2021, ARM Limited and Contributors. All rights reserved. 3 * Copyright (c) 2019-2023, Intel Corporation. All rights reserved. 4 * Copyright (c) 2024, Altera Corporation. All rights reserved. 5 * 6 * SPDX-License-Identifier: BSD-3-Clause 7 */ 8 9 #include <assert.h> 10 #include <arch.h> 11 #include <arch_helpers.h> 12 #include <common/bl_common.h> 13 #include <common/debug.h> 14 #include <common/desc_image_load.h> 15 #include <drivers/cadence/cdns_sdmmc.h> 16 #include <drivers/generic_delay_timer.h> 17 #include <drivers/synopsys/dw_mmc.h> 18 #include <drivers/ti/uart/uart_16550.h> 19 #include <lib/mmio.h> 20 #include <lib/xlat_tables/xlat_tables_v2.h> 21 22 #include "agilex5_clock_manager.h" 23 #include "agilex5_ddr.h" 24 #include "agilex5_memory_controller.h" 25 #include "agilex5_mmc.h" 26 #include "agilex5_pinmux.h" 27 #include "agilex5_power_manager.h" 28 #include "agilex5_system_manager.h" 29 #include "ccu/ncore_ccu.h" 30 #include "combophy/combophy.h" 31 #include "nand/nand.h" 32 #include "qspi/cadence_qspi.h" 33 #include "sdmmc/sdmmc.h" 34 #include "socfpga_emac.h" 35 #include "socfpga_f2sdram_manager.h" 36 #include "socfpga_handoff.h" 37 #include "socfpga_mailbox.h" 38 #include "socfpga_private.h" 39 #include "socfpga_reset_manager.h" 40 #include "socfpga_ros.h" 41 #include "socfpga_vab.h" 42 #include "wdt/watchdog.h" 43 44 45 /* Declare mmc_info */ 46 static struct mmc_device_info mmc_info; 47 48 /* Declare cadence idmac descriptor */ 49 extern struct cdns_idmac_desc cdns_desc[8] __aligned(32); 50 51 const mmap_region_t agilex_plat_mmap[] = { 52 MAP_REGION_FLAT(DRAM_BASE, DRAM_SIZE, 53 MT_MEMORY | MT_RW | MT_NS), 54 MAP_REGION_FLAT(PSS_BASE, PSS_SIZE, 55 MT_DEVICE | MT_RW | MT_NS), 56 MAP_REGION_FLAT(MPFE_BASE, MPFE_SIZE, 57 MT_DEVICE | MT_RW | MT_SECURE), 58 MAP_REGION_FLAT(OCRAM_BASE, OCRAM_SIZE, 59 MT_NON_CACHEABLE | MT_RW | MT_SECURE), 60 MAP_REGION_FLAT(CCU_BASE, CCU_SIZE, 61 MT_DEVICE | MT_RW | MT_SECURE), 62 MAP_REGION_FLAT(MEM64_BASE, MEM64_SIZE, 63 MT_DEVICE | MT_RW | MT_NS), 64 MAP_REGION_FLAT(GIC_BASE, GIC_SIZE, 65 MT_DEVICE | MT_RW | MT_SECURE), 66 {0}, 67 }; 68 69 boot_source_type boot_source = BOOT_SOURCE; 70 71 void bl2_el3_early_platform_setup(u_register_t x0 __unused, 72 u_register_t x1 __unused, 73 u_register_t x2 __unused, 74 u_register_t x3 __unused) 75 { 76 static console_t console; 77 handoff reverse_handoff_ptr; 78 79 /* Enable nonsecure access for peripherals and other misc components */ 80 enable_nonsecure_access(); 81 82 /* Bring all the required peripherals out of reset */ 83 deassert_peripheral_reset(); 84 85 /* 86 * Initialize the UART console early in BL2 EL3 boot flow to get 87 * the error/notice messages wherever required. 88 */ 89 console_16550_register(PLAT_INTEL_UART_BASE, PLAT_UART_CLOCK, 90 PLAT_BAUDRATE, &console); 91 92 /* Generic delay timer init */ 93 generic_delay_timer_init(); 94 95 socfpga_delay_timer_init(); 96 97 /* Get the handoff data */ 98 if ((socfpga_get_handoff(&reverse_handoff_ptr)) != 0) { 99 ERROR("SOCFPGA: Failed to get the correct handoff data\n"); 100 panic(); 101 } 102 103 /* Configure the pinmux */ 104 config_pinmux(&reverse_handoff_ptr); 105 106 /* Configure the clock manager */ 107 if ((config_clkmgr_handoff(&reverse_handoff_ptr)) != 0) { 108 ERROR("SOCFPGA: Failed to initialize the clock manager\n"); 109 panic(); 110 } 111 112 /* Configure power manager PSS SRAM power gate */ 113 config_pwrmgr_handoff(&reverse_handoff_ptr); 114 115 /* Initialize the mailbox to enable communication between HPS and SDM */ 116 mailbox_init(); 117 118 /* Perform a handshake with certain peripherals before issuing a reset */ 119 config_hps_hs_before_warm_reset(); 120 121 /* TODO: watchdog init */ 122 //watchdog_init(clkmgr_get_rate(CLKMGR_WDT_CLK_ID)); 123 124 /* Initialize the CCU module for hardware cache coherency */ 125 init_ncore_ccu(); 126 127 socfpga_emac_init(); 128 129 /* DDR and IOSSM driver init */ 130 agilex5_ddr_init(&reverse_handoff_ptr); 131 132 if (combo_phy_init(&reverse_handoff_ptr) != 0) { 133 ERROR("SOCFPGA: Combo Phy initialization failed\n"); 134 } 135 136 /* Enable FPGA bridges as required */ 137 if (!intel_mailbox_is_fpga_not_ready()) { 138 socfpga_bridges_enable(SOC2FPGA_MASK | LWHPS2FPGA_MASK | 139 FPGA2SOC_MASK | F2SDRAM0_MASK); 140 } 141 } 142 143 void bl2_el3_plat_arch_setup(void) 144 { 145 handoff reverse_handoff_ptr; 146 unsigned long offset = 0; 147 148 struct cdns_sdmmc_params params = EMMC_INIT_PARAMS((uintptr_t) &cdns_desc, 149 clkmgr_get_rate(CLKMGR_SDMMC_CLK_ID)); 150 151 mmc_info.mmc_dev_type = MMC_DEVICE_TYPE; 152 mmc_info.ocr_voltage = OCR_3_3_3_4 | OCR_3_2_3_3; 153 154 /* Request ownership and direct access to QSPI */ 155 mailbox_hps_qspi_enable(); 156 157 switch (boot_source) { 158 case BOOT_SOURCE_SDMMC: 159 NOTICE("SDMMC boot\n"); 160 sdmmc_init(&reverse_handoff_ptr, ¶ms, &mmc_info); 161 socfpga_io_setup(boot_source, PLAT_SDMMC_DATA_BASE); 162 break; 163 164 case BOOT_SOURCE_QSPI: 165 NOTICE("QSPI boot\n"); 166 cad_qspi_init(0, QSPI_CONFIG_CPHA, QSPI_CONFIG_CPOL, 167 QSPI_CONFIG_CSDA, QSPI_CONFIG_CSDADS, 168 QSPI_CONFIG_CSEOT, QSPI_CONFIG_CSSOT, 0); 169 if (ros_qspi_get_ssbl_offset(&offset) != ROS_RET_OK) { 170 offset = PLAT_QSPI_DATA_BASE; 171 } 172 socfpga_io_setup(boot_source, offset); 173 break; 174 175 case BOOT_SOURCE_NAND: 176 NOTICE("NAND boot\n"); 177 nand_init(&reverse_handoff_ptr); 178 socfpga_io_setup(boot_source, PLAT_NAND_DATA_BASE); 179 break; 180 181 default: 182 ERROR("Unsupported boot source\n"); 183 panic(); 184 break; 185 } 186 } 187 188 uint32_t get_spsr_for_bl33_entry(void) 189 { 190 unsigned long el_status; 191 unsigned int mode; 192 uint32_t spsr; 193 194 /* Figure out what mode we enter the non-secure world in */ 195 el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; 196 el_status &= ID_AA64PFR0_ELX_MASK; 197 198 mode = (el_status) ? MODE_EL2 : MODE_EL1; 199 200 /* 201 * TODO: Consider the possibility of specifying the SPSR in 202 * the FIP ToC and allowing the platform to have a say as 203 * well. 204 */ 205 spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); 206 return spsr; 207 } 208 209 int bl2_plat_handle_post_image_load(unsigned int image_id) 210 { 211 bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id); 212 213 assert(bl_mem_params); 214 215 #if SOCFPGA_SECURE_VAB_AUTH 216 /* 217 * VAB Authentication start here. 218 * If failed to authenticate, shall not proceed to process BL31 and hang. 219 */ 220 int ret = 0; 221 222 ret = socfpga_vab_init(image_id); 223 if (ret < 0) { 224 ERROR("SOCFPGA VAB Authentication failed\n"); 225 wfi(); 226 } 227 #endif 228 229 switch (image_id) { 230 case BL33_IMAGE_ID: 231 bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr(); 232 bl_mem_params->ep_info.spsr = get_spsr_for_bl33_entry(); 233 break; 234 default: 235 break; 236 } 237 238 return 0; 239 } 240 241 /******************************************************************************* 242 * Perform any BL3-1 platform setup code 243 ******************************************************************************/ 244 void bl2_platform_setup(void) 245 { 246 } 247