1 /* 2 * Copyright (c) 2015-2025, Arm Limited and Contributors. All rights reserved. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 7 #include <assert.h> 8 9 #include <arch.h> 10 #include <arch_features.h> 11 #include <arch_helpers.h> 12 #include <common/bl_common.h> 13 #include <common/debug.h> 14 #include <drivers/console.h> 15 #include <lib/debugfs.h> 16 #include <lib/extensions/ras.h> 17 #include <lib/fconf/fconf.h> 18 #include <lib/gpt_rme/gpt_rme.h> 19 #include <lib/mmio.h> 20 #if TRANSFER_LIST 21 #include <transfer_list.h> 22 #endif 23 #include <lib/xlat_tables/xlat_tables_compat.h> 24 #include <plat/arm/common/plat_arm.h> 25 #include <plat/common/platform.h> 26 #include <platform_def.h> 27 28 struct transfer_list_header *secure_tl; 29 struct transfer_list_header *ns_tl __unused; 30 31 #if USE_GIC_DRIVER == 3 32 const uintptr_t gicr_base_addrs[2] = { 33 PLAT_ARM_GICR_BASE, /* GICR Base address of the primary CPU */ 34 0U /* Zero Termination */ 35 }; 36 #endif 37 38 /* 39 * Placeholder variables for copying the arguments that have been passed to 40 * BL31 from BL2. 41 */ 42 static entry_point_info_t bl32_image_ep_info; 43 static entry_point_info_t bl33_image_ep_info; 44 45 #if ENABLE_RME 46 static entry_point_info_t rmm_image_ep_info; 47 #if (RME_GPT_BITLOCK_BLOCK == 0) 48 #define BITLOCK_BASE UL(0) 49 #define BITLOCK_SIZE UL(0) 50 #else 51 /* 52 * Number of bitlock_t entries in bitlocks array for PLAT_ARM_PPS 53 * with RME_GPT_BITLOCK_BLOCK * 512MB per bitlock. 54 */ 55 #if (PLAT_ARM_PPS > (RME_GPT_BITLOCK_BLOCK * SZ_512M * UL(8))) 56 #define BITLOCKS_NUM (PLAT_ARM_PPS) / \ 57 (RME_GPT_BITLOCK_BLOCK * SZ_512M * UL(8)) 58 #else 59 #define BITLOCKS_NUM U(1) 60 #endif 61 /* 62 * Bitlocks array 63 */ 64 static bitlock_t gpt_bitlock[BITLOCKS_NUM]; 65 #define BITLOCK_BASE (uintptr_t)gpt_bitlock 66 #define BITLOCK_SIZE sizeof(gpt_bitlock) 67 #endif /* RME_GPT_BITLOCK_BLOCK */ 68 #endif /* ENABLE_RME */ 69 70 #if !RESET_TO_BL31 71 /* 72 * Check that BL31_BASE is above ARM_FW_CONFIG_LIMIT. The reserved page 73 * is required for SOC_FW_CONFIG/TOS_FW_CONFIG passed from BL2. 74 */ 75 #if TRANSFER_LIST 76 CASSERT(BL31_BASE >= PLAT_ARM_EL3_FW_HANDOFF_LIMIT, assert_bl31_base_overflows); 77 #else 78 CASSERT(BL31_BASE >= ARM_FW_CONFIG_LIMIT, assert_bl31_base_overflows); 79 #endif /* TRANSFER_LIST */ 80 #endif /* RESET_TO_BL31 */ 81 82 /* Weak definitions may be overridden in specific ARM standard platform */ 83 #pragma weak bl31_early_platform_setup2 84 #pragma weak bl31_platform_setup 85 #pragma weak bl31_plat_arch_setup 86 #pragma weak bl31_plat_get_next_image_ep_info 87 #pragma weak bl31_plat_runtime_setup 88 89 #define MAP_BL31_TOTAL MAP_REGION_FLAT( \ 90 BL31_START, \ 91 BL31_END - BL31_START, \ 92 MT_MEMORY | MT_RW | EL3_PAS) 93 #if RECLAIM_INIT_CODE 94 IMPORT_SYM(unsigned long, __INIT_CODE_START__, BL_INIT_CODE_BASE); 95 IMPORT_SYM(unsigned long, __INIT_CODE_END__, BL_CODE_END_UNALIGNED); 96 IMPORT_SYM(unsigned long, __STACKS_END__, BL_STACKS_END_UNALIGNED); 97 98 #define BL_INIT_CODE_END ((BL_CODE_END_UNALIGNED + PAGE_SIZE - 1) & \ 99 ~(PAGE_SIZE - 1)) 100 #define BL_STACKS_END ((BL_STACKS_END_UNALIGNED + PAGE_SIZE - 1) & \ 101 ~(PAGE_SIZE - 1)) 102 103 #define MAP_BL_INIT_CODE MAP_REGION_FLAT( \ 104 BL_INIT_CODE_BASE, \ 105 BL_INIT_CODE_END \ 106 - BL_INIT_CODE_BASE, \ 107 MT_CODE | EL3_PAS) 108 #endif 109 110 #if SEPARATE_NOBITS_REGION 111 #define MAP_BL31_NOBITS MAP_REGION_FLAT( \ 112 BL31_NOBITS_BASE, \ 113 BL31_NOBITS_LIMIT \ 114 - BL31_NOBITS_BASE, \ 115 MT_MEMORY | MT_RW | EL3_PAS) 116 117 #endif 118 /******************************************************************************* 119 * Return a pointer to the 'entry_point_info' structure of the next image for the 120 * security state specified. BL33 corresponds to the non-secure image type 121 * while BL32 corresponds to the secure image type. A NULL pointer is returned 122 * if the image does not exist. 123 ******************************************************************************/ 124 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type) 125 { 126 entry_point_info_t *next_image_info; 127 128 assert(sec_state_is_valid(type)); 129 if (type == NON_SECURE) { 130 #if TRANSFER_LIST && !RESET_TO_BL31 131 next_image_info = transfer_list_set_handoff_args( 132 ns_tl, &bl33_image_ep_info); 133 #else 134 next_image_info = &bl33_image_ep_info; 135 #endif 136 } 137 #if ENABLE_RME 138 else if (type == REALM) { 139 next_image_info = &rmm_image_ep_info; 140 } 141 #endif 142 else { 143 #if TRANSFER_LIST && !RESET_TO_BL31 144 next_image_info = transfer_list_set_handoff_args( 145 secure_tl, &bl32_image_ep_info); 146 #else 147 next_image_info = &bl32_image_ep_info; 148 #endif 149 } 150 151 /* 152 * None of the images on the ARM development platforms can have 0x0 153 * as the entrypoint 154 */ 155 if (next_image_info->pc) 156 return next_image_info; 157 else 158 return NULL; 159 } 160 161 /******************************************************************************* 162 * Perform any BL31 early platform setup common to ARM standard platforms. 163 * Here is an opportunity to copy parameters passed by the calling EL (S-EL1 164 * in BL2 & EL3 in BL1) before they are lost (potentially). This needs to be 165 * done before the MMU is initialized so that the memory layout can be used 166 * while creating page tables. BL2 has flushed this information to memory, so 167 * we are guaranteed to pick up good data. 168 ******************************************************************************/ 169 void __init arm_bl31_early_platform_setup(u_register_t arg0, u_register_t arg1, 170 u_register_t arg2, u_register_t arg3) 171 { 172 #if TRANSFER_LIST 173 #if RESET_TO_BL31 174 /* Populate entry point information for BL33 */ 175 SET_PARAM_HEAD(&bl33_image_ep_info, PARAM_EP, VERSION_1, 0); 176 /* 177 * Tell BL31 where the non-trusted software image 178 * is located and the entry state information 179 */ 180 bl33_image_ep_info.pc = plat_get_ns_image_entrypoint(); 181 182 bl33_image_ep_info.spsr = arm_get_spsr(BL33_IMAGE_ID); 183 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); 184 185 bl33_image_ep_info.args.arg0 = PLAT_ARM_TRANSFER_LIST_DTB_OFFSET; 186 bl33_image_ep_info.args.arg1 = 187 TRANSFER_LIST_HANDOFF_X1_VALUE(REGISTER_CONVENTION_VERSION); 188 bl33_image_ep_info.args.arg3 = FW_NS_HANDOFF_BASE; 189 #else 190 struct transfer_list_entry *te = NULL; 191 struct entry_point_info *ep; 192 193 secure_tl = (struct transfer_list_header *)arg3; 194 195 /* 196 * Populate the global entry point structures used to execute subsequent 197 * images. 198 */ 199 while ((te = transfer_list_next(secure_tl, te)) != NULL) { 200 ep = transfer_list_entry_data(te); 201 202 if (te->tag_id == TL_TAG_EXEC_EP_INFO64) { 203 switch (GET_SECURITY_STATE(ep->h.attr)) { 204 case NON_SECURE: 205 bl33_image_ep_info = *ep; 206 break; 207 #if ENABLE_RME 208 case REALM: 209 rmm_image_ep_info = *ep; 210 break; 211 #endif 212 case SECURE: 213 bl32_image_ep_info = *ep; 214 break; 215 default: 216 ERROR("Unrecognized Image Security State %lu\n", 217 GET_SECURITY_STATE(ep->h.attr)); 218 panic(); 219 } 220 } 221 } 222 #endif /* RESET_TO_BL31 */ 223 #else /* (!TRANSFER_LIST) */ 224 #if RESET_TO_BL31 225 /* If BL31 is a reset vector, the parameters must be ignored */ 226 (void)arg0; 227 (void)arg1; 228 (void)arg2; 229 (void)arg3; 230 231 # ifdef BL32_BASE 232 /* Populate entry point information for BL32 */ 233 SET_PARAM_HEAD(&bl32_image_ep_info, 234 PARAM_EP, 235 VERSION_1, 236 0); 237 SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE); 238 bl32_image_ep_info.pc = BL32_BASE; 239 bl32_image_ep_info.spsr = arm_get_spsr(BL32_IMAGE_ID); 240 241 #if defined(SPD_spmd) 242 bl32_image_ep_info.args.arg0 = ARM_SPMC_MANIFEST_BASE; 243 #endif 244 245 # endif /* BL32_BASE */ 246 247 /* Populate entry point information for BL33 */ 248 SET_PARAM_HEAD(&bl33_image_ep_info, 249 PARAM_EP, 250 VERSION_1, 251 0); 252 /* 253 * Tell BL31 where the non-trusted software image 254 * is located and the entry state information 255 */ 256 bl33_image_ep_info.pc = plat_get_ns_image_entrypoint(); 257 258 #if ARM_LINUX_KERNEL_AS_BL33 259 bl33_image_ep_info.args.arg0 = ARM_PRELOADED_DTB_BASE; 260 bl33_image_ep_info.args.arg1 = 0U; 261 bl33_image_ep_info.args.arg2 = 0U; 262 bl33_image_ep_info.args.arg3 = 0U; 263 #endif /* ARM_LINUX_KERNEL_AS_BL33 */ 264 265 bl33_image_ep_info.spsr = arm_get_spsr(BL33_IMAGE_ID); 266 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); 267 268 #if ENABLE_RME 269 /* 270 * Populate entry point information for RMM. 271 * Only PC needs to be set as other fields are determined by RMMD. 272 */ 273 rmm_image_ep_info.pc = RMM_BASE; 274 #endif /* ENABLE_RME */ 275 #else /* RESET_TO_BL31 */ 276 /* 277 * In debug builds, we pass a special value in 'arg3' 278 * to verify platform parameters from BL2 to BL31. 279 * In release builds, it's not used. 280 */ 281 #if DEBUG 282 assert(((uintptr_t)arg3) == ARM_BL31_PLAT_PARAM_VAL); 283 #endif 284 285 /* 286 * Check params passed from BL2 should not be NULL, 287 */ 288 bl_params_t *params_from_bl2 = (bl_params_t *)(uintptr_t)arg0; 289 assert(params_from_bl2 != NULL); 290 assert(params_from_bl2->h.type == PARAM_BL_PARAMS); 291 assert(params_from_bl2->h.version >= VERSION_2); 292 293 bl_params_node_t *bl_params = params_from_bl2->head; 294 295 /* 296 * Copy BL33, BL32 and RMM (if present), entry point information. 297 * They are stored in Secure RAM, in BL2's address space. 298 */ 299 while (bl_params != NULL) { 300 if (bl_params->image_id == BL32_IMAGE_ID) { 301 bl32_image_ep_info = *bl_params->ep_info; 302 #if SPMC_AT_EL3 303 /* 304 * Populate the BL32 image base, size and max limit in 305 * the entry point information, since there is no 306 * platform function to retrieve them in generic 307 * code. We choose arg2, arg3 and arg4 since the generic 308 * code uses arg1 for stashing the SP manifest size. The 309 * SPMC setup uses these arguments to update SP manifest 310 * with actual SP's base address and it size. 311 */ 312 bl32_image_ep_info.args.arg2 = 313 bl_params->image_info->image_base; 314 bl32_image_ep_info.args.arg3 = 315 bl_params->image_info->image_size; 316 bl32_image_ep_info.args.arg4 = 317 bl_params->image_info->image_base + 318 bl_params->image_info->image_max_size; 319 #endif 320 } 321 #if ENABLE_RME 322 else if (bl_params->image_id == RMM_IMAGE_ID) { 323 rmm_image_ep_info = *bl_params->ep_info; 324 } 325 #endif 326 else if (bl_params->image_id == BL33_IMAGE_ID) { 327 bl33_image_ep_info = *bl_params->ep_info; 328 } 329 330 bl_params = bl_params->next_params_info; 331 } 332 333 if (bl33_image_ep_info.pc == 0U) 334 panic(); 335 #if ENABLE_RME 336 if (rmm_image_ep_info.pc == 0U) 337 panic(); 338 #endif 339 #endif /* RESET_TO_BL31 */ 340 #endif /* TRANSFER_LIST */ 341 } 342 343 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, 344 u_register_t arg2, u_register_t arg3) 345 { 346 arm_bl31_early_platform_setup(arg0, arg1, arg2, arg3); 347 348 /* 349 * Initialize Interconnect for this cluster during cold boot. 350 * No need for locks as no other CPU is active. 351 */ 352 plat_arm_interconnect_init(); 353 354 /* 355 * Enable Interconnect coherency for the primary CPU's cluster. 356 * Earlier bootloader stages might already do this (e.g. Trusted 357 * Firmware's BL1 does it) but we can't assume so. There is no harm in 358 * executing this code twice anyway. 359 * Platform specific PSCI code will enable coherency for other 360 * clusters. 361 */ 362 plat_arm_interconnect_enter_coherency(); 363 } 364 365 /******************************************************************************* 366 * Perform any BL31 platform setup common to ARM standard platforms 367 ******************************************************************************/ 368 void arm_bl31_platform_setup(void) 369 { 370 struct transfer_list_entry *te __unused; 371 372 #if TRANSFER_LIST && !RESET_TO_BL31 373 ns_tl = transfer_list_init((void *)FW_NS_HANDOFF_BASE, 374 PLAT_ARM_FW_HANDOFF_SIZE); 375 if (ns_tl == NULL) { 376 ERROR("Non-secure transfer list initialisation failed!\n"); 377 panic(); 378 } 379 /* BL31 may modify the HW_CONFIG so defer copying it until later. */ 380 te = transfer_list_find(secure_tl, TL_TAG_FDT); 381 assert(te != NULL); 382 383 /* 384 * A pre-existing assumption is that FCONF is unsupported w/ RESET_TO_BL2 and 385 * RESET_TO_BL31. In the case of RESET_TO_BL31 this makes sense because there 386 * isn't a prior stage to load the device tree, but the reasoning for RESET_TO_BL2 is 387 * less clear. For the moment hardware properties that would normally be 388 * derived from the DT are statically defined. 389 */ 390 #if !RESET_TO_BL2 391 fconf_populate("HW_CONFIG", (uintptr_t)transfer_list_entry_data(te)); 392 #endif 393 394 te = transfer_list_add(ns_tl, TL_TAG_FDT, te->data_size, 395 transfer_list_entry_data(te)); 396 assert(te != NULL); 397 398 te = transfer_list_find(secure_tl, TL_TAG_TPM_EVLOG); 399 if (te != NULL) { 400 te = transfer_list_add(ns_tl, TL_TAG_TPM_EVLOG, te->data_size, 401 transfer_list_entry_data(te)); 402 if (te == NULL) { 403 ERROR("Failed to load event log in Non-Secure transfer list\n"); 404 panic(); 405 } 406 } 407 #endif /* TRANSFER_LIST && !RESET_TO_BL31 */ 408 409 #if RESET_TO_BL31 410 /* 411 * Do initial security configuration to allow DRAM/device access 412 * (if earlier BL has not already done so). 413 */ 414 plat_arm_security_setup(); 415 416 #if defined(PLAT_ARM_MEM_PROT_ADDR) 417 arm_nor_psci_do_dyn_mem_protect(); 418 #endif /* PLAT_ARM_MEM_PROT_ADDR */ 419 420 #endif /* RESET_TO_BL31 */ 421 422 /* Enable and initialize the System level generic timer */ 423 mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF, 424 CNTCR_FCREQ(0U) | CNTCR_EN); 425 426 /* Allow access to the System counter timer module */ 427 arm_configure_sys_timer(); 428 429 /* Initialize power controller before setting up topology */ 430 plat_arm_pwrc_setup(); 431 432 #if ENABLE_FEAT_RAS && FFH_SUPPORT 433 ras_init(); 434 #endif 435 436 #if USE_DEBUGFS 437 debugfs_init(); 438 #endif /* USE_DEBUGFS */ 439 440 #if USE_GIC_DRIVER == 3 441 gic_set_gicr_frames(gicr_base_addrs); 442 #endif 443 } 444 445 /******************************************************************************* 446 * Perform any BL31 platform runtime setup prior to BL31 exit common to ARM 447 * standard platforms 448 ******************************************************************************/ 449 void arm_bl31_plat_runtime_setup(void) 450 { 451 struct transfer_list_entry *te __unused; 452 /* Initialize the runtime console */ 453 arm_console_runtime_init(); 454 455 #if TRANSFER_LIST && !RESET_TO_BL31 456 /* 457 * We assume BL31 has added all TE's required by BL33 at this stage, ensure 458 * that data is visible to all observers by performing a flush operation, so 459 * they can access the updated data even if caching is not enabled. 460 */ 461 flush_dcache_range((uintptr_t)ns_tl, ns_tl->size); 462 #endif /* TRANSFER_LIST && !RESET_TO_BL31 */ 463 464 #if RECLAIM_INIT_CODE 465 arm_free_init_memory(); 466 #endif 467 468 #if PLAT_RO_XLAT_TABLES 469 arm_xlat_make_tables_readonly(); 470 #endif 471 } 472 473 #if RECLAIM_INIT_CODE 474 /* 475 * Make memory for image boot time code RW to reclaim it as stack for the 476 * secondary cores, or RO where it cannot be reclaimed: 477 * 478 * |-------- INIT SECTION --------| 479 * ----------------------------------------- 480 * | CORE 0 | CORE 1 | CORE 2 | EXTRA | 481 * | STACK | STACK | STACK | SPACE | 482 * ----------------------------------------- 483 * <-------------------> <------> 484 * MAKE RW AND XN MAKE 485 * FOR STACKS RO AND XN 486 */ 487 void arm_free_init_memory(void) 488 { 489 int ret = 0; 490 491 if (BL_STACKS_END < BL_INIT_CODE_END) { 492 /* Reclaim some of the init section as stack if possible. */ 493 if (BL_INIT_CODE_BASE < BL_STACKS_END) { 494 ret |= xlat_change_mem_attributes(BL_INIT_CODE_BASE, 495 BL_STACKS_END - BL_INIT_CODE_BASE, 496 MT_RW_DATA); 497 } 498 /* Make the rest of the init section read-only. */ 499 ret |= xlat_change_mem_attributes(BL_STACKS_END, 500 BL_INIT_CODE_END - BL_STACKS_END, 501 MT_RO_DATA); 502 } else { 503 /* The stacks cover the init section, so reclaim it all. */ 504 ret |= xlat_change_mem_attributes(BL_INIT_CODE_BASE, 505 BL_INIT_CODE_END - BL_INIT_CODE_BASE, 506 MT_RW_DATA); 507 } 508 509 if (ret != 0) { 510 ERROR("Could not reclaim initialization code"); 511 panic(); 512 } 513 } 514 #endif 515 516 void __init bl31_platform_setup(void) 517 { 518 arm_bl31_platform_setup(); 519 } 520 521 void bl31_plat_runtime_setup(void) 522 { 523 arm_bl31_plat_runtime_setup(); 524 } 525 526 /******************************************************************************* 527 * Perform the very early platform specific architectural setup shared between 528 * ARM standard platforms. This only does basic initialization. Later 529 * architectural setup (bl31_arch_setup()) does not do anything platform 530 * specific. 531 ******************************************************************************/ 532 void __init arm_bl31_plat_arch_setup(void) 533 { 534 const mmap_region_t bl_regions[] = { 535 MAP_BL31_TOTAL, 536 #if ENABLE_RME 537 ARM_MAP_L0_GPT_REGION, 538 #endif 539 #if RECLAIM_INIT_CODE 540 MAP_BL_INIT_CODE, 541 #endif 542 #if SEPARATE_NOBITS_REGION 543 MAP_BL31_NOBITS, 544 #endif 545 ARM_MAP_BL_RO, 546 #if USE_ROMLIB 547 ARM_MAP_ROMLIB_CODE, 548 ARM_MAP_ROMLIB_DATA, 549 #endif 550 #if USE_COHERENT_MEM 551 ARM_MAP_BL_COHERENT_RAM, 552 #endif 553 {0} 554 }; 555 556 setup_page_tables(bl_regions, plat_arm_get_mmap()); 557 558 enable_mmu_el3(0); 559 560 #if ENABLE_RME 561 #if RESET_TO_BL31 562 /* initialize GPT only when RME is enabled. */ 563 assert(is_feat_rme_present()); 564 565 /* Initialise and enable granule protection after MMU. */ 566 arm_gpt_setup(); 567 #endif /* RESET_TO_BL31 */ 568 /* 569 * Initialise Granule Protection library and enable GPC for the primary 570 * processor. The tables have already been initialized by a previous BL 571 * stage, so there is no need to provide any PAS here. This function 572 * sets up pointers to those tables. 573 */ 574 if (gpt_runtime_init(BITLOCK_BASE, BITLOCK_SIZE) < 0) { 575 ERROR("gpt_runtime_init() failed!\n"); 576 panic(); 577 } 578 #endif /* ENABLE_RME */ 579 580 arm_setup_romlib(); 581 } 582 583 void __init bl31_plat_arch_setup(void) 584 { 585 arm_bl31_plat_arch_setup(); 586 } 587