1 /* 2 * Copyright (c) 2015-2024, Arm Limited and Contributors. All rights reserved. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 7 #include <assert.h> 8 9 #include <arch.h> 10 #include <arch_helpers.h> 11 #include <common/bl_common.h> 12 #include <common/debug.h> 13 #include <drivers/console.h> 14 #include <lib/debugfs.h> 15 #include <lib/extensions/ras.h> 16 #include <lib/fconf/fconf.h> 17 #include <lib/gpt_rme/gpt_rme.h> 18 #include <lib/mmio.h> 19 #if TRANSFER_LIST 20 #include <lib/transfer_list.h> 21 #endif 22 #include <lib/xlat_tables/xlat_tables_compat.h> 23 #include <plat/arm/common/plat_arm.h> 24 #include <plat/common/platform.h> 25 #include <platform_def.h> 26 27 static struct transfer_list_header *secure_tl __unused; 28 static struct transfer_list_header *ns_tl __unused; 29 30 /* 31 * Placeholder variables for copying the arguments that have been passed to 32 * BL31 from BL2. 33 */ 34 static entry_point_info_t bl32_image_ep_info; 35 static entry_point_info_t bl33_image_ep_info; 36 #if ENABLE_RME 37 static entry_point_info_t rmm_image_ep_info; 38 #endif 39 40 #if !RESET_TO_BL31 41 /* 42 * Check that BL31_BASE is above ARM_FW_CONFIG_LIMIT. The reserved page 43 * is required for SOC_FW_CONFIG/TOS_FW_CONFIG passed from BL2. 44 */ 45 #if TRANSFER_LIST 46 CASSERT(BL31_BASE >= PLAT_ARM_EL3_FW_HANDOFF_LIMIT, assert_bl31_base_overflows); 47 #else 48 CASSERT(BL31_BASE >= ARM_FW_CONFIG_LIMIT, assert_bl31_base_overflows); 49 #endif /* TRANSFER_LIST */ 50 #endif /* RESET_TO_BL31 */ 51 52 /* Weak definitions may be overridden in specific ARM standard platform */ 53 #pragma weak bl31_early_platform_setup2 54 #pragma weak bl31_platform_setup 55 #pragma weak bl31_plat_arch_setup 56 #pragma weak bl31_plat_get_next_image_ep_info 57 #pragma weak bl31_plat_runtime_setup 58 59 #define MAP_BL31_TOTAL MAP_REGION_FLAT( \ 60 BL31_START, \ 61 BL31_END - BL31_START, \ 62 MT_MEMORY | MT_RW | EL3_PAS) 63 #if RECLAIM_INIT_CODE 64 IMPORT_SYM(unsigned long, __INIT_CODE_START__, BL_INIT_CODE_BASE); 65 IMPORT_SYM(unsigned long, __INIT_CODE_END__, BL_CODE_END_UNALIGNED); 66 IMPORT_SYM(unsigned long, __STACKS_END__, BL_STACKS_END_UNALIGNED); 67 68 #define BL_INIT_CODE_END ((BL_CODE_END_UNALIGNED + PAGE_SIZE - 1) & \ 69 ~(PAGE_SIZE - 1)) 70 #define BL_STACKS_END ((BL_STACKS_END_UNALIGNED + PAGE_SIZE - 1) & \ 71 ~(PAGE_SIZE - 1)) 72 73 #define MAP_BL_INIT_CODE MAP_REGION_FLAT( \ 74 BL_INIT_CODE_BASE, \ 75 BL_INIT_CODE_END \ 76 - BL_INIT_CODE_BASE, \ 77 MT_CODE | EL3_PAS) 78 #endif 79 80 #if SEPARATE_NOBITS_REGION 81 #define MAP_BL31_NOBITS MAP_REGION_FLAT( \ 82 BL31_NOBITS_BASE, \ 83 BL31_NOBITS_LIMIT \ 84 - BL31_NOBITS_BASE, \ 85 MT_MEMORY | MT_RW | EL3_PAS) 86 87 #endif 88 /******************************************************************************* 89 * Return a pointer to the 'entry_point_info' structure of the next image for the 90 * security state specified. BL33 corresponds to the non-secure image type 91 * while BL32 corresponds to the secure image type. A NULL pointer is returned 92 * if the image does not exist. 93 ******************************************************************************/ 94 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type) 95 { 96 entry_point_info_t *next_image_info; 97 98 assert(sec_state_is_valid(type)); 99 if (type == NON_SECURE) { 100 #if TRANSFER_LIST && !RESET_TO_BL31 101 next_image_info = transfer_list_set_handoff_args( 102 ns_tl, &bl33_image_ep_info); 103 #else 104 next_image_info = &bl33_image_ep_info; 105 #endif 106 } 107 #if ENABLE_RME 108 else if (type == REALM) { 109 next_image_info = &rmm_image_ep_info; 110 } 111 #endif 112 else { 113 next_image_info = &bl32_image_ep_info; 114 } 115 116 /* 117 * None of the images on the ARM development platforms can have 0x0 118 * as the entrypoint 119 */ 120 if (next_image_info->pc) 121 return next_image_info; 122 else 123 return NULL; 124 } 125 126 /******************************************************************************* 127 * Perform any BL31 early platform setup common to ARM standard platforms. 128 * Here is an opportunity to copy parameters passed by the calling EL (S-EL1 129 * in BL2 & EL3 in BL1) before they are lost (potentially). This needs to be 130 * done before the MMU is initialized so that the memory layout can be used 131 * while creating page tables. BL2 has flushed this information to memory, so 132 * we are guaranteed to pick up good data. 133 ******************************************************************************/ 134 #if TRANSFER_LIST 135 void __init arm_bl31_early_platform_setup(u_register_t arg0, u_register_t arg1, 136 u_register_t arg2, u_register_t arg3) 137 { 138 #if RESET_TO_BL31 139 /* Populate entry point information for BL33 */ 140 SET_PARAM_HEAD(&bl33_image_ep_info, PARAM_EP, VERSION_1, 0); 141 /* 142 * Tell BL31 where the non-trusted software image 143 * is located and the entry state information 144 */ 145 bl33_image_ep_info.pc = plat_get_ns_image_entrypoint(); 146 147 bl33_image_ep_info.spsr = arm_get_spsr_for_bl33_entry(); 148 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); 149 150 bl33_image_ep_info.args.arg0 = 151 FW_NS_HANDOFF_BASE + ARM_PRELOADED_DTB_OFFSET; 152 bl33_image_ep_info.args.arg1 = 153 TRANSFER_LIST_HANDOFF_X1_VALUE(REGISTER_CONVENTION_VERSION); 154 bl33_image_ep_info.args.arg3 = FW_NS_HANDOFF_BASE; 155 #else 156 struct transfer_list_entry *te = NULL; 157 struct entry_point_info *ep; 158 159 secure_tl = (struct transfer_list_header *)arg3; 160 161 /* 162 * Populate the global entry point structures used to execute subsequent 163 * images. 164 */ 165 while ((te = transfer_list_next(secure_tl, te)) != NULL) { 166 ep = transfer_list_entry_data(te); 167 168 if (te->tag_id == TL_TAG_EXEC_EP_INFO64) { 169 switch (GET_SECURITY_STATE(ep->h.attr)) { 170 case NON_SECURE: 171 bl33_image_ep_info = *ep; 172 break; 173 #if ENABLE_RME 174 case REALM: 175 rmm_image_ep_info = *ep; 176 break; 177 #endif 178 case SECURE: 179 bl32_image_ep_info = *ep; 180 break; 181 default: 182 ERROR("Unrecognized Image Security State %lu\n", 183 GET_SECURITY_STATE(ep->h.attr)); 184 panic(); 185 } 186 } 187 } 188 #endif /* RESET_TO_BL31 */ 189 } 190 #else 191 void __init arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config, 192 uintptr_t hw_config, void *plat_params_from_bl2) 193 { 194 /* Initialize the console to provide early debug support */ 195 arm_console_boot_init(); 196 197 #if RESET_TO_BL31 198 /* There are no parameters from BL2 if BL31 is a reset vector */ 199 assert(from_bl2 == NULL); 200 assert(plat_params_from_bl2 == NULL); 201 202 # ifdef BL32_BASE 203 /* Populate entry point information for BL32 */ 204 SET_PARAM_HEAD(&bl32_image_ep_info, 205 PARAM_EP, 206 VERSION_1, 207 0); 208 SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE); 209 bl32_image_ep_info.pc = BL32_BASE; 210 bl32_image_ep_info.spsr = arm_get_spsr_for_bl32_entry(); 211 212 #if defined(SPD_spmd) 213 /* SPM (hafnium in secure world) expects SPM Core manifest base address 214 * in x0, which in !RESET_TO_BL31 case loaded after base of non shared 215 * SRAM(after 4KB offset of SRAM). But in RESET_TO_BL31 case all non 216 * shared SRAM is allocated to BL31, so to avoid overwriting of manifest 217 * keep it in the last page. 218 */ 219 bl32_image_ep_info.args.arg0 = ARM_TRUSTED_SRAM_BASE + 220 PLAT_ARM_TRUSTED_SRAM_SIZE - PAGE_SIZE; 221 #endif 222 223 # endif /* BL32_BASE */ 224 225 /* Populate entry point information for BL33 */ 226 SET_PARAM_HEAD(&bl33_image_ep_info, 227 PARAM_EP, 228 VERSION_1, 229 0); 230 /* 231 * Tell BL31 where the non-trusted software image 232 * is located and the entry state information 233 */ 234 bl33_image_ep_info.pc = plat_get_ns_image_entrypoint(); 235 236 bl33_image_ep_info.spsr = arm_get_spsr_for_bl33_entry(); 237 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); 238 239 #if ENABLE_RME 240 /* 241 * Populate entry point information for RMM. 242 * Only PC needs to be set as other fields are determined by RMMD. 243 */ 244 rmm_image_ep_info.pc = RMM_BASE; 245 #endif /* ENABLE_RME */ 246 247 #else /* RESET_TO_BL31 */ 248 249 /* 250 * In debug builds, we pass a special value in 'plat_params_from_bl2' 251 * to verify platform parameters from BL2 to BL31. 252 * In release builds, it's not used. 253 */ 254 assert(((unsigned long long)plat_params_from_bl2) == 255 ARM_BL31_PLAT_PARAM_VAL); 256 257 /* 258 * Check params passed from BL2 should not be NULL, 259 */ 260 bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2; 261 assert(params_from_bl2 != NULL); 262 assert(params_from_bl2->h.type == PARAM_BL_PARAMS); 263 assert(params_from_bl2->h.version >= VERSION_2); 264 265 bl_params_node_t *bl_params = params_from_bl2->head; 266 267 /* 268 * Copy BL33, BL32 and RMM (if present), entry point information. 269 * They are stored in Secure RAM, in BL2's address space. 270 */ 271 while (bl_params != NULL) { 272 if (bl_params->image_id == BL32_IMAGE_ID) { 273 bl32_image_ep_info = *bl_params->ep_info; 274 #if SPMC_AT_EL3 275 /* 276 * Populate the BL32 image base, size and max limit in 277 * the entry point information, since there is no 278 * platform function to retrieve them in generic 279 * code. We choose arg2, arg3 and arg4 since the generic 280 * code uses arg1 for stashing the SP manifest size. The 281 * SPMC setup uses these arguments to update SP manifest 282 * with actual SP's base address and it size. 283 */ 284 bl32_image_ep_info.args.arg2 = 285 bl_params->image_info->image_base; 286 bl32_image_ep_info.args.arg3 = 287 bl_params->image_info->image_size; 288 bl32_image_ep_info.args.arg4 = 289 bl_params->image_info->image_base + 290 bl_params->image_info->image_max_size; 291 #endif 292 } 293 #if ENABLE_RME 294 else if (bl_params->image_id == RMM_IMAGE_ID) { 295 rmm_image_ep_info = *bl_params->ep_info; 296 } 297 #endif 298 else if (bl_params->image_id == BL33_IMAGE_ID) { 299 bl33_image_ep_info = *bl_params->ep_info; 300 } 301 302 bl_params = bl_params->next_params_info; 303 } 304 305 if (bl33_image_ep_info.pc == 0U) 306 panic(); 307 #if ENABLE_RME 308 if (rmm_image_ep_info.pc == 0U) 309 panic(); 310 #endif 311 #endif /* RESET_TO_BL31 */ 312 313 # if ARM_LINUX_KERNEL_AS_BL33 314 /* 315 * According to the file ``Documentation/arm64/booting.txt`` of the 316 * Linux kernel tree, Linux expects the physical address of the device 317 * tree blob (DTB) in x0, while x1-x3 are reserved for future use and 318 * must be 0. 319 * Repurpose the option to load Hafnium hypervisor in the normal world. 320 * It expects its manifest address in x0. This is essentially the linux 321 * dts (passed to the primary VM) by adding 'hypervisor' and chosen 322 * nodes specifying the Hypervisor configuration. 323 */ 324 #if RESET_TO_BL31 325 bl33_image_ep_info.args.arg0 = (u_register_t)ARM_PRELOADED_DTB_BASE; 326 #else 327 bl33_image_ep_info.args.arg0 = (u_register_t)hw_config; 328 #endif 329 bl33_image_ep_info.args.arg1 = 0U; 330 bl33_image_ep_info.args.arg2 = 0U; 331 bl33_image_ep_info.args.arg3 = 0U; 332 # endif 333 } 334 #endif 335 336 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, 337 u_register_t arg2, u_register_t arg3) 338 { 339 #if TRANSFER_LIST 340 arm_bl31_early_platform_setup(arg0, arg1, arg2, arg3); 341 #else 342 arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3); 343 #endif 344 345 /* 346 * Initialize Interconnect for this cluster during cold boot. 347 * No need for locks as no other CPU is active. 348 */ 349 plat_arm_interconnect_init(); 350 351 /* 352 * Enable Interconnect coherency for the primary CPU's cluster. 353 * Earlier bootloader stages might already do this (e.g. Trusted 354 * Firmware's BL1 does it) but we can't assume so. There is no harm in 355 * executing this code twice anyway. 356 * Platform specific PSCI code will enable coherency for other 357 * clusters. 358 */ 359 plat_arm_interconnect_enter_coherency(); 360 } 361 362 /******************************************************************************* 363 * Perform any BL31 platform setup common to ARM standard platforms 364 ******************************************************************************/ 365 void arm_bl31_platform_setup(void) 366 { 367 struct transfer_list_entry *te __unused; 368 369 #if TRANSFER_LIST && !RESET_TO_BL31 370 /* Initialise the non-secure world tl, BL31 may modify the HW_CONFIG so defer 371 * copying it until later. 372 */ 373 ns_tl = transfer_list_init((void *)FW_NS_HANDOFF_BASE, 374 PLAT_ARM_FW_HANDOFF_SIZE); 375 376 if (ns_tl == NULL) { 377 ERROR("Non-secure transfer list initialisation failed!"); 378 panic(); 379 } 380 381 #if !RESET_TO_BL2 382 te = transfer_list_find(secure_tl, TL_TAG_FDT); 383 assert(te != NULL); 384 385 fconf_populate("HW_CONFIG", (uintptr_t)transfer_list_entry_data(te)); 386 #endif /* !(RESET_TO_BL2 && RESET_TO_BL31) */ 387 #endif /* TRANSFER_LIST */ 388 389 /* Initialize the GIC driver, cpu and distributor interfaces */ 390 plat_arm_gic_driver_init(); 391 plat_arm_gic_init(); 392 393 #if RESET_TO_BL31 394 /* 395 * Do initial security configuration to allow DRAM/device access 396 * (if earlier BL has not already done so). 397 */ 398 plat_arm_security_setup(); 399 400 #if defined(PLAT_ARM_MEM_PROT_ADDR) 401 arm_nor_psci_do_dyn_mem_protect(); 402 #endif /* PLAT_ARM_MEM_PROT_ADDR */ 403 404 #endif /* RESET_TO_BL31 */ 405 406 /* Enable and initialize the System level generic timer */ 407 mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF, 408 CNTCR_FCREQ(0U) | CNTCR_EN); 409 410 /* Allow access to the System counter timer module */ 411 arm_configure_sys_timer(); 412 413 /* Initialize power controller before setting up topology */ 414 plat_arm_pwrc_setup(); 415 416 #if ENABLE_FEAT_RAS && FFH_SUPPORT 417 ras_init(); 418 #endif 419 420 #if USE_DEBUGFS 421 debugfs_init(); 422 #endif /* USE_DEBUGFS */ 423 } 424 425 /******************************************************************************* 426 * Perform any BL31 platform runtime setup prior to BL31 exit common to ARM 427 * standard platforms 428 ******************************************************************************/ 429 void arm_bl31_plat_runtime_setup(void) 430 { 431 struct transfer_list_entry *te __unused; 432 /* Initialize the runtime console */ 433 arm_console_runtime_init(); 434 435 #if TRANSFER_LIST && !RESET_TO_BL31 436 te = transfer_list_find(secure_tl, TL_TAG_FDT); 437 assert(te != NULL); 438 439 te = transfer_list_add(ns_tl, TL_TAG_FDT, te->data_size, 440 transfer_list_entry_data(te)); 441 assert(te != NULL); 442 443 /* 444 * We assume BL31 has added all TE's required by BL33 at this stage, ensure 445 * that data is visible to all observers by performing a flush operation, so 446 * they can access the updated data even if caching is not enabled. 447 */ 448 flush_dcache_range((uintptr_t)ns_tl, ns_tl->size); 449 #endif /* TRANSFER_LIST && !(RESET_TO_BL2 || RESET_TO_BL31) */ 450 451 #if RECLAIM_INIT_CODE 452 arm_free_init_memory(); 453 #endif 454 455 #if PLAT_RO_XLAT_TABLES 456 arm_xlat_make_tables_readonly(); 457 #endif 458 } 459 460 #if RECLAIM_INIT_CODE 461 /* 462 * Make memory for image boot time code RW to reclaim it as stack for the 463 * secondary cores, or RO where it cannot be reclaimed: 464 * 465 * |-------- INIT SECTION --------| 466 * ----------------------------------------- 467 * | CORE 0 | CORE 1 | CORE 2 | EXTRA | 468 * | STACK | STACK | STACK | SPACE | 469 * ----------------------------------------- 470 * <-------------------> <------> 471 * MAKE RW AND XN MAKE 472 * FOR STACKS RO AND XN 473 */ 474 void arm_free_init_memory(void) 475 { 476 int ret = 0; 477 478 if (BL_STACKS_END < BL_INIT_CODE_END) { 479 /* Reclaim some of the init section as stack if possible. */ 480 if (BL_INIT_CODE_BASE < BL_STACKS_END) { 481 ret |= xlat_change_mem_attributes(BL_INIT_CODE_BASE, 482 BL_STACKS_END - BL_INIT_CODE_BASE, 483 MT_RW_DATA); 484 } 485 /* Make the rest of the init section read-only. */ 486 ret |= xlat_change_mem_attributes(BL_STACKS_END, 487 BL_INIT_CODE_END - BL_STACKS_END, 488 MT_RO_DATA); 489 } else { 490 /* The stacks cover the init section, so reclaim it all. */ 491 ret |= xlat_change_mem_attributes(BL_INIT_CODE_BASE, 492 BL_INIT_CODE_END - BL_INIT_CODE_BASE, 493 MT_RW_DATA); 494 } 495 496 if (ret != 0) { 497 ERROR("Could not reclaim initialization code"); 498 panic(); 499 } 500 } 501 #endif 502 503 void __init bl31_platform_setup(void) 504 { 505 arm_bl31_platform_setup(); 506 } 507 508 void bl31_plat_runtime_setup(void) 509 { 510 arm_bl31_plat_runtime_setup(); 511 } 512 513 /******************************************************************************* 514 * Perform the very early platform specific architectural setup shared between 515 * ARM standard platforms. This only does basic initialization. Later 516 * architectural setup (bl31_arch_setup()) does not do anything platform 517 * specific. 518 ******************************************************************************/ 519 void __init arm_bl31_plat_arch_setup(void) 520 { 521 const mmap_region_t bl_regions[] = { 522 MAP_BL31_TOTAL, 523 #if ENABLE_RME 524 ARM_MAP_L0_GPT_REGION, 525 #endif 526 #if RECLAIM_INIT_CODE 527 MAP_BL_INIT_CODE, 528 #endif 529 #if SEPARATE_NOBITS_REGION 530 MAP_BL31_NOBITS, 531 #endif 532 ARM_MAP_BL_RO, 533 #if USE_ROMLIB 534 ARM_MAP_ROMLIB_CODE, 535 ARM_MAP_ROMLIB_DATA, 536 #endif 537 #if USE_COHERENT_MEM 538 ARM_MAP_BL_COHERENT_RAM, 539 #endif 540 {0} 541 }; 542 543 setup_page_tables(bl_regions, plat_arm_get_mmap()); 544 545 enable_mmu_el3(0); 546 547 #if ENABLE_RME 548 /* 549 * Initialise Granule Protection library and enable GPC for the primary 550 * processor. The tables have already been initialized by a previous BL 551 * stage, so there is no need to provide any PAS here. This function 552 * sets up pointers to those tables. 553 */ 554 if (gpt_runtime_init() < 0) { 555 ERROR("gpt_runtime_init() failed!\n"); 556 panic(); 557 } 558 #endif /* ENABLE_RME */ 559 560 arm_setup_romlib(); 561 } 562 563 void __init bl31_plat_arch_setup(void) 564 { 565 arm_bl31_plat_arch_setup(); 566 } 567