xref: /rk3399_ARM-atf/plat/arm/board/fvp/include/platform_def.h (revision 988fd102e702782e1219b7d0e7fc3b00c7966169)

/*
 * Copyright (c) 2014-2025, Arm Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef PLATFORM_DEF_H
#define PLATFORM_DEF_H

#include <drivers/arm/tzc400.h>
#include <lib/utils_def.h>
#include <plat/arm/board/common/v2m_def.h>
#include <plat/arm/common/arm_def.h>
#include <plat/arm/common/arm_spm_def.h>
#include <plat/common/common_def.h>

#include "../fvp_def.h"

#if TRUSTED_BOARD_BOOT
#include MBEDTLS_CONFIG_FILE
#endif

/* Required platform porting definitions */
#define PLATFORM_CORE_COUNT  (U(FVP_CLUSTER_COUNT) * \
			      U(FVP_MAX_CPUS_PER_CLUSTER) * \
			      U(FVP_MAX_PE_PER_CPU))

#define PLAT_NUM_PWR_DOMAINS (U(FVP_CLUSTER_COUNT) + \
			      PLATFORM_CORE_COUNT + U(1))

#define PLAT_MAX_PWR_LVL		ARM_PWR_LVL2

#if PSCI_OS_INIT_MODE
#define PLAT_MAX_CPU_SUSPEND_PWR_LVL	ARM_PWR_LVL1
#endif

/*
 * Other platform porting definitions are provided by included headers
 */

/*
 * Required ARM standard platform porting definitions
 */
#define PLAT_ARM_CLUSTER_COUNT		U(FVP_CLUSTER_COUNT)

#define PLAT_ARM_TRUSTED_SRAM_SIZE	(FVP_TRUSTED_SRAM_SIZE * UL(1024))

#define PLAT_ARM_TRUSTED_ROM_BASE	UL(0x00000000)
#define PLAT_ARM_TRUSTED_ROM_SIZE	UL(0x04000000)	/* 64 MB */

#define PLAT_ARM_TRUSTED_DRAM_BASE	UL(0x06000000)
#define PLAT_ARM_TRUSTED_DRAM_SIZE	UL(0x02000000)	/* 32 MB */

#if ENABLE_RME
#define PLAT_ARM_RMM_BASE		(RMM_BASE)
#define PLAT_ARM_RMM_SIZE		(RMM_LIMIT - RMM_BASE)

#define PLAT_ARM_RMM_PAYLOAD_SIZE	UL(0x600000)	/* 2 * 3MB */

/* Protected physical address size */
#define PLAT_ARM_PPS			(SZ_1T)
#endif /* ENABLE_RME */

/*
 * Max size of SPMC is 16MB for fvp. With SPMD enabled this value corresponds to
 * max size of BL32 image.
 */
#if defined(SPD_spmd)
#define PLAT_ARM_SPMC_BASE		PLAT_ARM_TRUSTED_DRAM_BASE
#define PLAT_ARM_SPMC_SIZE		SZ_16M
#endif

/* Virtual address used by dynamic mem_protect for chunk_base */
#define PLAT_ARM_MEM_PROTEC_VA_FRAME	UL(0xc0000000)

/* No SCP in FVP */
#define PLAT_ARM_SCP_TZC_DRAM1_SIZE	UL(0x0)

#define PLAT_ARM_DRAM2_BASE	ULL(0x880000000) /* 36-bit range */
#define PLAT_ARM_DRAM2_SIZE	ULL(0x780000000) /* 30 GB */

#define FVP_DRAM3_BASE	ULL(0x8800000000) /* 40-bit range */
#define FVP_DRAM3_SIZE	ULL(0x7800000000) /* 480 GB */
#define FVP_DRAM3_END	(FVP_DRAM3_BASE + FVP_DRAM3_SIZE - 1U)

#define FVP_DRAM4_BASE	ULL(0x88000000000) /* 44-bit range */
#define FVP_DRAM4_SIZE	ULL(0x78000000000) /* 7.5 TB */
#define FVP_DRAM4_END	(FVP_DRAM4_BASE + FVP_DRAM4_SIZE - 1U)

#define FVP_DRAM5_BASE	ULL(0x880000000000) /* 48-bit range */
#define FVP_DRAM5_SIZE	ULL(0x780000000000) /* 120 TB */
#define FVP_DRAM5_END	(FVP_DRAM5_BASE + FVP_DRAM5_SIZE - 1U)

#define FVP_DRAM6_BASE	ULL(0x8800000000000) /* 52-bit range */
#define FVP_DRAM6_SIZE	ULL(0x7800000000000) /* 1920 TB */
#define FVP_DRAM6_END	(FVP_DRAM6_BASE + FVP_DRAM6_SIZE - 1U)

/*
 * On the FVP platform when using the EL3 SPMC implementation allocate the
 * datastore for tracking shared memory descriptors in the TZC DRAM section
 * to ensure sufficient storage can be allocated.
 * Provide an implementation of the accessor method to allow the datastore
 * details to be retrieved by the SPMC.
 * The SPMC will take care of initializing the memory region.
 */

#define PLAT_SPMC_SHMEM_DATASTORE_SIZE 512 * 1024

/* Define memory configuration for device tree files. */
#define PLAT_ARM_HW_CONFIG_SIZE			U(0x4000)

#if SPMC_AT_EL3

/*
 * Number of Secure Partitions supported.
 * SPMC at EL3, uses this count to configure the maximum number of supported
 * secure partitions.
 */
#define SECURE_PARTITION_COUNT		1

/*
 * Number of Normal World Partitions supported.
 * SPMC at EL3, uses this count to configure the maximum number of supported
 * NWd partitions.
 */
#define NS_PARTITION_COUNT		1

/*
 * Number of Logical Partitions supported.
 * SPMC at EL3, uses this count to configure the maximum number of supported
 * logical partitions.
 */
#define MAX_EL3_LP_DESCS_COUNT		1

#endif /* SPMC_AT_EL3 */

/*
 * Load address of BL33 for this platform port
 */
#define PLAT_ARM_NS_IMAGE_BASE		(ARM_DRAM1_BASE + UL(0x8000000))

#if TRANSFER_LIST

/* Define maximum size of sp manifest file. */
#if defined(SPD_spmd)
#define PLAT_ARM_SPMC_SP_MANIFEST_SIZE	SZ_4K
#else
#define PLAT_ARM_SPMC_SP_MANIFEST_SIZE	UL(0x0)
#endif

/*
 * PLAT_ARM_FW_HANDOFF_SIZE should be page-aligned to ensure proper xlat mapping.
 * If it is not, generating the page table mapping for FW_HANDOFF will fail.
 * Because PLAT_ARM_EVENT_LOG_MAX_SIZE is not guaranteed to be aligned,
 * PLAT_ARM_FW_HANDOFF_SIZE must be explicitly aligned.
 */
#define PLAT_ARM_FW_HANDOFF_SIZE	((((PLAT_ARM_HW_CONFIG_SIZE +		\
					    PLAT_ARM_EVENT_LOG_MAX_SIZE +	\
					    PLAT_ARM_SPMC_SP_MANIFEST_SIZE) +	\
					    PAGE_SIZE_MASK) >>			\
					    PAGE_SIZE_SHIFT) << PAGE_SIZE_SHIFT)

#define FW_NS_HANDOFF_BASE		(PLAT_ARM_NS_IMAGE_BASE - PLAT_ARM_FW_HANDOFF_SIZE)
#define PLAT_ARM_EL3_FW_HANDOFF_BASE	ARM_BL_RAM_BASE
#define PLAT_ARM_EL3_FW_HANDOFF_LIMIT	PLAT_ARM_EL3_FW_HANDOFF_BASE + PLAT_ARM_FW_HANDOFF_SIZE

#if RESET_TO_BL31
#define PLAT_ARM_TRANSFER_LIST_DTB_OFFSET	FW_NS_HANDOFF_BASE + TRANSFER_LIST_DTB_OFFSET
#endif

#else
#define PLAT_ARM_FW_HANDOFF_SIZE	U(0)
#endif

/*
 * PLAT_ARM_MMAP_ENTRIES depends on the number of entries in the
 * plat_arm_mmap array defined for each BL stage.
 */
#if defined(IMAGE_BL31)
# if SPM_MM
#  define PLAT_ARM_MMAP_ENTRIES		10
#  define MAX_XLAT_TABLES		9
#  define PLAT_SP_IMAGE_MMAP_REGIONS	30
#  define PLAT_SP_IMAGE_MAX_XLAT_TABLES	12
# elif SPMC_AT_EL3
#  define PLAT_ARM_MMAP_ENTRIES		13
#  define MAX_XLAT_TABLES		11
#  define PLAT_SP_IMAGE_MMAP_REGIONS	31
#  define PLAT_SP_IMAGE_MAX_XLAT_TABLES	13
# else
#  define PLAT_ARM_MMAP_ENTRIES		9
#  if USE_DEBUGFS
#   if ENABLE_RME
#    define MAX_XLAT_TABLES		9
#   else
#    define MAX_XLAT_TABLES		8
#   endif
#  else
#   if ENABLE_RME
#    define MAX_XLAT_TABLES		8
#   elif DRTM_SUPPORT
#    define MAX_XLAT_TABLES		8
#   else
#    define MAX_XLAT_TABLES		7
#   endif
#  endif
# endif
#elif defined(IMAGE_BL32)
# if SPMC_AT_EL3
#  define PLAT_ARM_MMAP_ENTRIES		270
#  define MAX_XLAT_TABLES		10
# else
#  define PLAT_ARM_MMAP_ENTRIES		9
#  define MAX_XLAT_TABLES		6
# endif
#elif !USE_ROMLIB
# if defined(IMAGE_BL2) && (ENABLE_RME || SPMC_AT_EL3)
#  define PLAT_ARM_MMAP_ENTRIES		12
#  define MAX_XLAT_TABLES		6
# else
#  define PLAT_ARM_MMAP_ENTRIES		12
#  define MAX_XLAT_TABLES		5
# endif /* (IMAGE_BL2 && ENABLE_RME) */
#else
# define PLAT_ARM_MMAP_ENTRIES		12
# if (defined(SPD_tspd) || defined(SPD_opteed) || defined(SPD_spmd)) && \
defined(IMAGE_BL2) && MEASURED_BOOT
#  define MAX_XLAT_TABLES		7
# else
#  define MAX_XLAT_TABLES		6
# endif /* (SPD_tspd || SPD_opteed || SPD_spmd) && IMAGE_BL2 && MEASURED_BOOT */
#endif

/*
 * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
 * plus a little space for growth.
 * In case of PSA Crypto API, few algorithms like ECDSA needs bigger BL1 RW
 * area.
 */
#if TF_MBEDTLS_KEY_ALG_ID == TF_MBEDTLS_RSA_AND_ECDSA || PSA_CRYPTO || \
FVP_TRUSTED_SRAM_SIZE == 512
#define PLAT_ARM_MAX_BL1_RW_SIZE	UL(0xD000)
#else
#define PLAT_ARM_MAX_BL1_RW_SIZE	UL(0xB000)
#endif

/*
 * PLAT_ARM_MAX_ROMLIB_RW_SIZE is define to use a full page
 */

#if USE_ROMLIB
#define PLAT_ARM_MAX_ROMLIB_RW_SIZE	UL(0x1000)
#define PLAT_ARM_MAX_ROMLIB_RO_SIZE	UL(0xe000)
#define FVP_BL2_ROMLIB_OPTIMIZATION	UL(0x5000)
#else
#define PLAT_ARM_MAX_ROMLIB_RW_SIZE	UL(0)
#define PLAT_ARM_MAX_ROMLIB_RO_SIZE	UL(0)
#define FVP_BL2_ROMLIB_OPTIMIZATION UL(0)
#endif

/*
 * Set the maximum size of BL2 to be close to half of the Trusted SRAM.
 * Maximum size of BL2 increases as Trusted SRAM size increases.
 */
#if (defined(TF_MBEDTLS_KEY_ALG_ID) && \
     (TF_MBEDTLS_KEY_ALG_ID == TF_MBEDTLS_RSA_AND_ECDSA)) || \
    (TRUSTED_BOARD_BOOT && COT_DESC_IN_DTB)
# define PLAT_ARM_MAX_BL2_SIZE	((PLAT_ARM_TRUSTED_SRAM_SIZE / 2) - \
				 (2 * PAGE_SIZE) - \
				 FVP_BL2_ROMLIB_OPTIMIZATION)
#elif TRUSTED_BOARD_BOOT || MEASURED_BOOT
# define PLAT_ARM_MAX_BL2_SIZE	((PLAT_ARM_TRUSTED_SRAM_SIZE / 2) - \
				 (3 * PAGE_SIZE) - \
				 FVP_BL2_ROMLIB_OPTIMIZATION)
#elif ARM_BL31_IN_DRAM
/* When ARM_BL31_IN_DRAM is set, BL2 can use almost all of Trusted SRAM. */
# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x1F000) - FVP_BL2_ROMLIB_OPTIMIZATION)
#else
/**
 * Default to just under half of SRAM to ensure there's enough room for really
 * large BL31 build configurations when using the default SRAM size (256 Kb).
 */
#define PLAT_ARM_MAX_BL2_SIZE                                               \
	(((PLAT_ARM_TRUSTED_SRAM_SIZE / 3) & ~PAGE_SIZE_MASK) - PAGE_SIZE - \
	 FVP_BL2_ROMLIB_OPTIMIZATION)
#endif

#if RESET_TO_BL31
/* Size of Trusted SRAM - the first 4KB of shared memory - GPT L0 Tables */
#define PLAT_ARM_MAX_BL31_SIZE		(PLAT_ARM_TRUSTED_SRAM_SIZE - \
					 ARM_SHARED_RAM_SIZE - \
					 ARM_L0_GPT_SIZE)
#else
/*
 * Since BL31 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL31_SIZE is
 * calculated using the current BL31 PROGBITS debug size plus the sizes of
 * BL2 and BL1-RW.
 * Size of the BL31 PROGBITS increases as the SRAM size increases.
 */
#if TRANSFER_LIST
#define PLAT_ARM_MAX_BL31_SIZE                              \
	(PLAT_ARM_TRUSTED_SRAM_SIZE - ARM_SHARED_RAM_SIZE - \
	 PLAT_ARM_FW_HANDOFF_SIZE - ARM_L0_GPT_SIZE)
#else
#define PLAT_ARM_MAX_BL31_SIZE		(PLAT_ARM_TRUSTED_SRAM_SIZE - \
					 ARM_SHARED_RAM_SIZE - \
					 ARM_FW_CONFIGS_SIZE - ARM_L0_GPT_SIZE)
#endif /* TRANSFER_LIST */
#endif /* RESET_TO_BL31 */

#ifndef __aarch64__
#if RESET_TO_SP_MIN
/* Size of Trusted SRAM - the first 4KB of shared memory */
#define PLAT_ARM_MAX_BL32_SIZE		(PLAT_ARM_TRUSTED_SRAM_SIZE - \
					 ARM_SHARED_RAM_SIZE)
#else
/*
 * Since BL32 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL32_SIZE is
 * calculated using the current SP_MIN PROGBITS debug size plus the sizes of
 * BL2 and BL1-RW
 */
#if TRANSFER_LIST
# define PLAT_ARM_MAX_BL32_SIZE		(PLAT_ARM_TRUSTED_SRAM_SIZE - \
					 ARM_SHARED_RAM_SIZE - \
					 PLAT_ARM_FW_HANDOFF_SIZE)
#else
# define PLAT_ARM_MAX_BL32_SIZE		(PLAT_ARM_TRUSTED_SRAM_SIZE - \
					 ARM_SHARED_RAM_SIZE - \
					 ARM_FW_CONFIGS_SIZE)
#endif /* TRANSFER_LIST */
#endif /* RESET_TO_SP_MIN */
#endif

/*
 * Size of cacheable stacks
 */
#if defined(IMAGE_BL1)
# if CRYPTO_SUPPORT
#  define PLATFORM_STACK_SIZE		UL(0x1000)
# else
#  define PLATFORM_STACK_SIZE		UL(0x500)
# endif /* CRYPTO_SUPPORT */
#elif defined(IMAGE_BL2)
# if CRYPTO_SUPPORT
#  define PLATFORM_STACK_SIZE		UL(0x1000)
# else
#  define PLATFORM_STACK_SIZE		UL(0x600)
# endif /* CRYPTO_SUPPORT */
#elif defined(IMAGE_BL2U)
# define PLATFORM_STACK_SIZE		UL(0x400)
#elif defined(IMAGE_BL31)
# if DRTM_SUPPORT
#  define PLATFORM_STACK_SIZE		UL(0x1000)
# else
#  define PLATFORM_STACK_SIZE		UL(0x800)
# endif /* DRTM_SUPPORT */
#elif defined(IMAGE_BL32)
# if SPMC_AT_EL3
#  define PLATFORM_STACK_SIZE		UL(0x1000)
# else
#  define PLATFORM_STACK_SIZE		UL(0x440)
# endif /* SPMC_AT_EL3 */
#elif defined(IMAGE_RMM)
# define PLATFORM_STACK_SIZE		UL(0x440)
#endif

#define MAX_IO_DEVICES			3
#define MAX_IO_HANDLES			4

/* Reserve the last block of flash for PSCI MEM PROTECT flag */
#define PLAT_ARM_FLASH_IMAGE_BASE	V2M_FLASH0_BASE
#define PLAT_ARM_FLASH_IMAGE_MAX_SIZE	(V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)

#if ARM_GPT_SUPPORT && IMAGE_BL1
/*
 * Offset of the FIP in the GPT image. BL1 component uses this option
 * as it does not load the partition table to get the FIP base
 * address. At sector 34 by default (i.e. after reserved sectors 0-33)
 * Offset = 34 * 512(sector size) = 17408 i.e. 0x4400
 */
#define PLAT_ARM_FIP_OFFSET_IN_GPT	0x4400
#endif /* ARM_GPT_SUPPORT */

#define PLAT_ARM_NVM_BASE		V2M_FLASH0_BASE
#define PLAT_ARM_NVM_SIZE		(V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)

/*
 * PL011 related constants
 */
#define PLAT_ARM_BOOT_UART_BASE		V2M_IOFPGA_UART0_BASE
#define PLAT_ARM_BOOT_UART_CLK_IN_HZ	V2M_IOFPGA_UART0_CLK_IN_HZ

#define PLAT_ARM_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
#define PLAT_ARM_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ

#define PLAT_ARM_CRASH_UART_BASE	PLAT_ARM_RUN_UART_BASE
#define PLAT_ARM_CRASH_UART_CLK_IN_HZ	PLAT_ARM_RUN_UART_CLK_IN_HZ

#define PLAT_ARM_TSP_UART_BASE		V2M_IOFPGA_UART2_BASE
#define PLAT_ARM_TSP_UART_CLK_IN_HZ	V2M_IOFPGA_UART2_CLK_IN_HZ

#define PLAT_ARM_TRP_UART_BASE		V2M_IOFPGA_UART3_BASE
#define PLAT_ARM_TRP_UART_CLK_IN_HZ	V2M_IOFPGA_UART3_CLK_IN_HZ

#define PLAT_FVP_SMMUV3_BASE		UL(0x2b400000)
#define PLAT_ARM_SMMUV3_ROOT_REG_OFFSET UL(0x20000)

/* CCI related constants */
#define PLAT_FVP_CCI400_BASE		UL(0x2c090000)
#define PLAT_FVP_CCI400_CLUS0_SL_PORT	3
#define PLAT_FVP_CCI400_CLUS1_SL_PORT	4

/* CCI-500/CCI-550 on Base platform */
#define PLAT_FVP_CCI5XX_BASE		UL(0x2a000000)
#define PLAT_FVP_CCI5XX_CLUS0_SL_PORT	5
#define PLAT_FVP_CCI5XX_CLUS1_SL_PORT	6

/* CCN related constants. Only CCN 502 is currently supported */
#define PLAT_ARM_CCN_BASE		UL(0x2e000000)
#define PLAT_ARM_CLUSTER_TO_CCN_ID_MAP	1, 5, 7, 11

/* System timer related constants */
#define PLAT_ARM_NSTIMER_FRAME_ID	U(1)

/* Mailbox base address */
#define PLAT_ARM_TRUSTED_MAILBOX_BASE	ARM_TRUSTED_SRAM_BASE

/* PCIe memory region 1 (Base Platform RevC only) */
#define PLAT_ARM_PCI_MEM_1_BASE		(ULL(0x50000000))
#define PLAT_ARM_PCI_MEM_1_SIZE		(SZ_256M) /* 256MB */

/*
 * PCIe memory region 2 (Base Platform RevC only)
 * The full size of the second PCI memory region is 256GB
 * but for now we only allocate the L1 GPTs for the first 3GB.
 */
#define PLAT_ARM_PCI_MEM_2_BASE		(ULL(0x4000000000))
#define	PLAT_ARM_PCI_MEM_2_SIZE		(3 * SZ_1G) /* 3GB */

/* TrustZone controller related constants
 *
 * Currently only filters 0 and 2 are connected on Base FVP.
 * Filter 0 : CPU clusters (no access to DRAM by default)
 * Filter 1 : not connected
 * Filter 2 : LCDs (access to VRAM allowed by default)
 * Filter 3 : not connected
 * Programming unconnected filters will have no effect at the
 * moment. These filter could, however, be connected in future.
 * So care should be taken not to configure the unused filters.
 *
 * Allow only non-secure access to all DRAM to supported devices.
 * Give access to the CPUs and Virtio. Some devices
 * would normally use the default ID so allow that too.
 */
#define PLAT_ARM_TZC_BASE		UL(0x2a4a0000)
#define PLAT_ARM_TZC_FILTERS		TZC_400_REGION_ATTR_FILTER_BIT(0)

#define PLAT_ARM_TZC_NS_DEV_ACCESS	(				\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT)	|	\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI)		|	\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP)		|	\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO)	|	\
		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD))

/*
 * GIC related constants to cater for both GICv2 and GICv3 instances of an
 * FVP. They could be overridden at runtime in case the FVP implements the
 * legacy VE memory map.
 */
#define PLAT_ARM_GICD_BASE		BASE_GICD_BASE
#define PLAT_ARM_GICR_BASE		BASE_GICR_BASE
#define PLAT_ARM_GICC_BASE		BASE_GICC_BASE

/*
 * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
 * terminology. On a GICv2 system or mode, the lists will be merged and treated
 * as Group 0 interrupts.
 */
#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
	ARM_G1S_IRQ_PROPS(grp), \
	INTR_PROP_DESC(FVP_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, (grp), \
			GIC_INTR_CFG_LEVEL), \
	INTR_PROP_DESC(FVP_IRQ_SEC_SYS_TIMER, GIC_HIGHEST_SEC_PRIORITY, (grp), \
			GIC_INTR_CFG_LEVEL)

#define PLAT_ARM_G0_IRQ_PROPS(grp)	ARM_G0_IRQ_PROPS(grp)

#if SDEI_IN_FCONF
#define PLAT_SDEI_DP_EVENT_MAX_CNT	ARM_SDEI_DP_EVENT_MAX_CNT
#define PLAT_SDEI_DS_EVENT_MAX_CNT	ARM_SDEI_DS_EVENT_MAX_CNT
#else
  #if PLATFORM_TEST_RAS_FFH || PLATFORM_TEST_FFH_LSP_RAS_SP
  #define PLAT_ARM_PRIVATE_SDEI_EVENTS \
	ARM_SDEI_PRIVATE_EVENTS, \
	SDEI_EXPLICIT_EVENT(5000, SDEI_MAPF_NORMAL), \
	SDEI_EXPLICIT_EVENT(5001, SDEI_MAPF_NORMAL), \
	SDEI_EXPLICIT_EVENT(5002, SDEI_MAPF_NORMAL), \
	SDEI_EXPLICIT_EVENT(5003, SDEI_MAPF_CRITICAL), \
	SDEI_EXPLICIT_EVENT(5004, SDEI_MAPF_CRITICAL)
  #else
  #define PLAT_ARM_PRIVATE_SDEI_EVENTS	ARM_SDEI_PRIVATE_EVENTS
  #endif
#define PLAT_ARM_SHARED_SDEI_EVENTS	ARM_SDEI_SHARED_EVENTS
#endif

#define PLAT_ARM_SP_IMAGE_STACK_BASE	(PLAT_SPM_BUF_BASE + \
					 PLAT_SPM_BUF_SIZE)

#define PLAT_SP_PRI			0x20

/*
 * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
 */
#ifdef __aarch64__
#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
#else
#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
#endif

/*
 * Maximum size of Event Log buffer used in Measured Boot Event Log driver
 * TODO: calculate maximum EventLog size using the calculation:
 * Maximum size of Event Log * Number of images
 */
#if (defined(SPD_spmd)) || (ENABLE_RME && (defined(SPD_tspd) || defined(SPD_opteed)))
/*
 * Account for additional measurements of secure partitions and SPM.
 * Also, account for OP-TEE running with maximum number of SPs.
 */
#define PLAT_ARM_EVENT_LOG_MAX_SIZE		UL(0x800)
#elif defined(IMAGE_BL1) && TRANSFER_LIST
#define PLAT_ARM_EVENT_LOG_MAX_SIZE		UL(0x200)
#else
#define PLAT_ARM_EVENT_LOG_MAX_SIZE		UL(0x400)
#endif

/*
 * Maximum size of Event Log buffer used for DRTM
 */
#define PLAT_DRTM_EVENT_LOG_MAX_SIZE		UL(0x300)

/*
 * Number of MMAP entries used by DRTM implementation
 */
#define PLAT_DRTM_MMAP_ENTRIES			PLAT_ARM_MMAP_ENTRIES

#endif /* PLATFORM_DEF_H */