xref: /OK3568_Linux_fs/u-boot/include/miiphy.h (revision 4882a59341e53eb6f0b4789bf948001014eff981)
1 /*
2  * SPDX-License-Identifier:	GPL-2.0	IBM-pibs
3  *
4  * Additions (C) Copyright 2009 Industrie Dial Face S.p.A.
5  */
6 /*----------------------------------------------------------------------------+
7 |
8 |  File Name:	miiphy.h
9 |
10 |  Function:	Include file defining PHY registers.
11 |
12 |  Author:	Mark Wisner
13 |
14 +----------------------------------------------------------------------------*/
15 #ifndef _miiphy_h_
16 #define _miiphy_h_
17 
18 #include <common.h>
19 #include <linux/mii.h>
20 #include <linux/list.h>
21 #include <net.h>
22 #include <phy.h>
23 
24 int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
25 		 unsigned short *value);
26 int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
27 		  unsigned short value);
28 int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui,
29 		 unsigned char *model, unsigned char *rev);
30 int miiphy_reset(const char *devname, unsigned char addr);
31 int miiphy_speed(const char *devname, unsigned char addr);
32 int miiphy_duplex(const char *devname, unsigned char addr);
33 int miiphy_is_1000base_x(const char *devname, unsigned char addr);
34 #ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
35 int miiphy_link(const char *devname, unsigned char addr);
36 #endif
37 
38 void miiphy_init(void);
39 
40 int miiphy_set_current_dev(const char *devname);
41 const char *miiphy_get_current_dev(void);
42 struct mii_dev *mdio_get_current_dev(void);
43 struct mii_dev *miiphy_get_dev_by_name(const char *devname);
44 struct phy_device *mdio_phydev_for_ethname(const char *devname);
45 
46 void miiphy_listdev(void);
47 
48 struct mii_dev *mdio_alloc(void);
49 void mdio_free(struct mii_dev *bus);
50 int mdio_register(struct mii_dev *bus);
51 
52 /**
53  * mdio_register_seq - Register mdio bus with sequence number
54  * @bus: mii device structure
55  * @seq: sequence number
56  *
57  * Return: 0 if success, negative value if error
58  */
59 int mdio_register_seq(struct mii_dev *bus, int seq);
60 int mdio_unregister(struct mii_dev *bus);
61 void mdio_list_devices(void);
62 
63 #ifdef CONFIG_BITBANGMII
64 
65 #define BB_MII_DEVNAME	"bb_miiphy"
66 
67 struct bb_miiphy_bus {
68 	char name[16];
69 	int (*init)(struct bb_miiphy_bus *bus);
70 	int (*mdio_active)(struct bb_miiphy_bus *bus);
71 	int (*mdio_tristate)(struct bb_miiphy_bus *bus);
72 	int (*set_mdio)(struct bb_miiphy_bus *bus, int v);
73 	int (*get_mdio)(struct bb_miiphy_bus *bus, int *v);
74 	int (*set_mdc)(struct bb_miiphy_bus *bus, int v);
75 	int (*delay)(struct bb_miiphy_bus *bus);
76 #ifdef CONFIG_BITBANGMII_MULTI
77 	void *priv;
78 #endif
79 };
80 
81 extern struct bb_miiphy_bus bb_miiphy_buses[];
82 extern int bb_miiphy_buses_num;
83 
84 void bb_miiphy_init(void);
85 int bb_miiphy_read(struct mii_dev *miidev, int addr, int devad, int reg);
86 int bb_miiphy_write(struct mii_dev *miidev, int addr, int devad, int reg,
87 		    u16 value);
88 #endif
89 
90 /* phy seed setup */
91 #define AUTO			99
92 #define _1000BASET		1000
93 #define _100BASET		100
94 #define _10BASET		10
95 #define HALF			22
96 #define FULL			44
97 
98 /* phy register offsets */
99 #define MII_MIPSCR		0x11
100 
101 /* MII_LPA */
102 #define PHY_ANLPAR_PSB_802_3	0x0001
103 #define PHY_ANLPAR_PSB_802_9	0x0002
104 
105 /* MII_CTRL1000 masks */
106 #define PHY_1000BTCR_1000FD	0x0200
107 #define PHY_1000BTCR_1000HD	0x0100
108 
109 /* MII_STAT1000 masks */
110 #define PHY_1000BTSR_MSCF	0x8000
111 #define PHY_1000BTSR_MSCR	0x4000
112 #define PHY_1000BTSR_LRS	0x2000
113 #define PHY_1000BTSR_RRS	0x1000
114 #define PHY_1000BTSR_1000FD	0x0800
115 #define PHY_1000BTSR_1000HD	0x0400
116 
117 /* phy EXSR */
118 #define ESTATUS_1000XF		0x8000
119 #define ESTATUS_1000XH		0x4000
120 
121 #ifdef CONFIG_DM_MDIO
122 
123 /**
124  * struct mdio_perdev_priv - Per-device class data for MDIO DM
125  *
126  * @mii_bus: Supporting MII legacy bus
127  */
128 struct mdio_perdev_priv {
129 	struct mii_dev *mii_bus;
130 };
131 
132 /**
133  * struct mdio_ops - MDIO bus operations
134  *
135  * @read: Read from a PHY register
136  * @write: Write to a PHY register
137  * @reset: Reset the MDIO bus, NULL if not supported
138  */
139 struct mdio_ops {
140 	int (*read)(struct udevice *mdio_dev, int addr, int devad, int reg);
141 	int (*write)(struct udevice *mdio_dev, int addr, int devad, int reg,
142 		     u16 val);
143 	int (*reset)(struct udevice *mdio_dev);
144 };
145 
146 #define mdio_get_ops(dev) ((struct mdio_ops *)(dev)->driver->ops)
147 
148 /**
149  * dm_mdio_probe_devices - Call probe on all MII devices, currently used for
150  * MDIO console commands.
151  */
152 void dm_mdio_probe_devices(void);
153 
154 /**
155  * dm_mdio_phy_connect - Wrapper over phy_connect for DM MDIO
156  *
157  * @dev: mdio dev
158  * @addr: PHY address on MDIO bus
159  * @ethdev: ethernet device to connect to the PHY
160  * @interface: MAC-PHY protocol
161  *
162  * @return pointer to phy_device, or 0 on error
163  */
164 struct phy_device *dm_mdio_phy_connect(struct udevice *dev, int addr,
165 				       struct udevice *ethdev,
166 				       phy_interface_t interface);
167 
168 #endif
169 
170 #endif
171