1 /* 2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * (C) Copyright 2007-2011 5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 6 * Tom Cubie <tangliang@allwinnertech.com> 7 * 8 * Configuration settings for the Allwinner sunxi series of boards. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _SUNXI_COMMON_CONFIG_H 14 #define _SUNXI_COMMON_CONFIG_H 15 16 #include <asm/arch/cpu.h> 17 #include <linux/stringify.h> 18 19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 20 /* 21 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 22 * expense of restricting some features, so the regular machine id values can 23 * be used. 24 */ 25 # define CONFIG_MACH_TYPE_COMPAT_REV 0 26 #else 27 /* 28 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 29 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 30 * beyond the machine id check. 31 */ 32 # define CONFIG_MACH_TYPE_COMPAT_REV 1 33 #endif 34 35 #ifdef CONFIG_ARM64 36 #define CONFIG_BUILD_TARGET "u-boot.itb" 37 #endif 38 39 /* Serial & console */ 40 #define CONFIG_SYS_NS16550_SERIAL 41 /* ns16550 reg in the low bits of cpu reg */ 42 #define CONFIG_SYS_NS16550_CLK 24000000 43 #ifndef CONFIG_DM_SERIAL 44 # define CONFIG_SYS_NS16550_REG_SIZE -4 45 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 46 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 47 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 48 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 49 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 50 #endif 51 52 /* CPU */ 53 #define COUNTER_FREQUENCY 24000000 54 55 /* 56 * The DRAM Base differs between some models. We cannot use macros for the 57 * CONFIG_FOO defines which contain the DRAM base address since they end 58 * up unexpanded in include/autoconf.mk . 59 * 60 * So we have to have this #ifdef #else #endif block for these. 61 */ 62 #ifdef CONFIG_MACH_SUN9I 63 #define SDRAM_OFFSET(x) 0x2##x 64 #define CONFIG_SYS_SDRAM_BASE 0x20000000 65 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 66 #define CONFIG_SYS_TEXT_BASE 0x2a000000 67 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 68 * since it needs to fit in with the other values. By also #defining it 69 * we get warnings if the Kconfig value mismatches. */ 70 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 71 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 72 #else 73 #define SDRAM_OFFSET(x) 0x4##x 74 #define CONFIG_SYS_SDRAM_BASE 0x40000000 75 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 76 /* V3s do not have enough memory to place code at 0x4a000000 */ 77 #ifndef CONFIG_MACH_SUN8I_V3S 78 #define CONFIG_SYS_TEXT_BASE 0x4a000000 79 #else 80 #define CONFIG_SYS_TEXT_BASE 0x42e00000 81 #endif 82 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 83 * since it needs to fit in with the other values. By also #defining it 84 * we get warnings if the Kconfig value mismatches. */ 85 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 86 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 87 #endif 88 89 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 90 91 #ifdef CONFIG_SUNXI_HIGH_SRAM 92 /* 93 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 94 * slightly bigger. Note that it is possible to map the first 32 KiB of the 95 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 96 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 97 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 98 */ 99 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 100 #define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ 101 #else 102 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 103 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 104 #endif 105 106 #define CONFIG_SYS_INIT_SP_OFFSET \ 107 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 108 #define CONFIG_SYS_INIT_SP_ADDR \ 109 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 110 111 #define CONFIG_NR_DRAM_BANKS 1 112 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 113 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 114 115 #ifdef CONFIG_AHCI 116 #define CONFIG_LIBATA 117 #define CONFIG_SCSI_AHCI 118 #define CONFIG_SCSI_AHCI_PLAT 119 #define CONFIG_SUNXI_AHCI 120 #define CONFIG_SYS_64BIT_LBA 121 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 122 #define CONFIG_SYS_SCSI_MAX_LUN 1 123 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 124 CONFIG_SYS_SCSI_MAX_LUN) 125 #endif 126 127 #define CONFIG_SETUP_MEMORY_TAGS 128 #define CONFIG_CMDLINE_TAG 129 #define CONFIG_INITRD_TAG 130 #define CONFIG_SERIAL_TAG 131 132 #ifdef CONFIG_NAND_SUNXI 133 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 134 #define CONFIG_SYS_NAND_ONFI_DETECTION 135 #define CONFIG_SYS_MAX_NAND_DEVICE 8 136 #endif 137 138 #ifdef CONFIG_SPL_SPI_SUNXI 139 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 140 #endif 141 142 /* mmc config */ 143 #ifdef CONFIG_MMC 144 #define CONFIG_MMC_SUNXI_SLOT 0 145 #endif 146 147 #if defined(CONFIG_ENV_IS_IN_MMC) 148 #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ 149 #define CONFIG_SYS_MMC_MAX_DEVICE 4 150 #elif defined(CONFIG_ENV_IS_NOWHERE) 151 #define CONFIG_ENV_SIZE (128 << 10) 152 #endif 153 154 #ifndef CONFIG_MACH_SUN8I_V3S 155 /* 64MB of malloc() pool */ 156 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 157 #else 158 /* 2MB of malloc() pool */ 159 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 160 #endif 161 162 /* 163 * Miscellaneous configurable options 164 */ 165 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 166 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 167 168 /* standalone support */ 169 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 170 171 /* FLASH and environment organization */ 172 173 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 174 175 #define CONFIG_SPL_FRAMEWORK 176 177 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 178 #define CONFIG_SPL_BOARD_LOAD_IMAGE 179 #endif 180 181 #ifdef CONFIG_SUNXI_HIGH_SRAM 182 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 183 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 184 #ifdef CONFIG_ARM64 185 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 186 #define LOW_LEVEL_SRAM_STACK 0x00054000 187 #else 188 #define LOW_LEVEL_SRAM_STACK 0x00018000 189 #endif /* !CONFIG_ARM64 */ 190 #else 191 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 192 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 193 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 194 #endif 195 196 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 197 198 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 199 200 201 /* I2C */ 202 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 203 defined CONFIG_SY8106A_POWER 204 #endif 205 206 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 207 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 208 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 209 #define CONFIG_SYS_I2C_MVTWSI 210 #ifndef CONFIG_DM_I2C 211 #define CONFIG_SYS_I2C 212 #define CONFIG_SYS_I2C_SPEED 400000 213 #define CONFIG_SYS_I2C_SLAVE 0x7f 214 #endif 215 #endif 216 217 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 218 #define CONFIG_SYS_I2C_SOFT 219 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 220 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 221 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 222 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 223 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 224 #ifndef __ASSEMBLY__ 225 extern int soft_i2c_gpio_sda; 226 extern int soft_i2c_gpio_scl; 227 #endif 228 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 229 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 230 #else 231 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 232 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 233 #endif 234 235 /* PMU */ 236 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 237 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 238 defined CONFIG_SY8106A_POWER 239 #endif 240 241 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 242 #if CONFIG_CONS_INDEX == 1 243 #ifdef CONFIG_MACH_SUN9I 244 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 245 #else 246 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 247 #endif 248 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 249 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 250 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 251 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 252 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 253 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 254 #else 255 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 256 #endif 257 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 258 259 /* GPIO */ 260 #define CONFIG_SUNXI_GPIO 261 262 #ifdef CONFIG_VIDEO 263 /* 264 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 265 * to use as framebuffer. This must be a multiple of 4096. 266 */ 267 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 268 269 /* Do we want to initialize a simple FB? */ 270 #define CONFIG_VIDEO_DT_SIMPLEFB 271 272 #define CONFIG_VIDEO_SUNXI 273 274 #define CONFIG_VIDEO_LOGO 275 #define CONFIG_VIDEO_STD_TIMINGS 276 #define CONFIG_I2C_EDID 277 #define VIDEO_LINE_LEN (pGD->plnSizeX) 278 279 /* allow both serial and cfb console. */ 280 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 281 282 #endif /* CONFIG_VIDEO */ 283 284 /* Ethernet support */ 285 #ifdef CONFIG_SUNXI_EMAC 286 #define CONFIG_PHY_ADDR 1 287 #define CONFIG_MII /* MII PHY management */ 288 #endif 289 290 #ifdef CONFIG_SUN7I_GMAC 291 #define CONFIG_PHY_ADDR 1 292 #define CONFIG_MII /* MII PHY management */ 293 #define CONFIG_PHY_REALTEK 294 #endif 295 296 #ifdef CONFIG_USB_EHCI_HCD 297 #define CONFIG_USB_OHCI_NEW 298 #define CONFIG_USB_OHCI_SUNXI 299 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 300 #endif 301 302 #ifdef CONFIG_USB_MUSB_SUNXI 303 #define CONFIG_USB_MUSB_PIO_ONLY 304 #endif 305 306 #ifdef CONFIG_USB_MUSB_GADGET 307 #define CONFIG_USB_FUNCTION_MASS_STORAGE 308 #endif 309 310 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE 311 #endif 312 313 #ifdef CONFIG_USB_KEYBOARD 314 #define CONFIG_PREBOOT 315 #endif 316 317 #define CONFIG_MISC_INIT_R 318 319 #ifndef CONFIG_SPL_BUILD 320 #include <config_distro_defaults.h> 321 322 #ifdef CONFIG_ARM64 323 /* 324 * Boards seem to come with at least 512MB of DRAM. 325 * The kernel should go at 512K, which is the default text offset (that will 326 * be adjusted at runtime if needed). 327 * There is no compression for arm64 kernels (yet), so leave some space 328 * for really big kernels, say 256MB for now. 329 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 330 * Align the initrd to a 2MB page. 331 */ 332 #define BOOTM_SIZE __stringify(0xa000000) 333 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 334 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 335 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 336 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 337 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 338 339 #else 340 /* 341 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 342 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 343 * 1M script, 1M pxe and the ramdisk at the end. 344 */ 345 #ifndef CONFIG_MACH_SUN8I_V3S 346 #define BOOTM_SIZE __stringify(0xa000000) 347 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 348 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 349 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 350 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 351 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 352 #else 353 /* 354 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 355 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 356 * 1M script, 1M pxe and the ramdisk at the end. 357 */ 358 #define BOOTM_SIZE __stringify(0x2e00000) 359 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 360 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 361 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 362 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 363 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 364 #endif 365 #endif 366 367 #define MEM_LAYOUT_ENV_SETTINGS \ 368 "bootm_size=" BOOTM_SIZE "\0" \ 369 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 370 "fdt_addr_r=" FDT_ADDR_R "\0" \ 371 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 372 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 373 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 374 375 #define DFU_ALT_INFO_RAM \ 376 "dfu_alt_info_ram=" \ 377 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 378 "fdt ram " FDT_ADDR_R " 0x100000;" \ 379 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 380 381 #ifdef CONFIG_MMC 382 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 383 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 384 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1) 385 #else 386 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) 387 #endif 388 #else 389 #define BOOT_TARGET_DEVICES_MMC(func) 390 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) 391 #endif 392 393 #ifdef CONFIG_AHCI 394 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 395 #else 396 #define BOOT_TARGET_DEVICES_SCSI(func) 397 #endif 398 399 #ifdef CONFIG_USB_STORAGE 400 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 401 #else 402 #define BOOT_TARGET_DEVICES_USB(func) 403 #endif 404 405 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 406 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 407 "bootcmd_fel=" \ 408 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 409 "echo '(FEL boot)'; " \ 410 "source ${fel_scriptaddr}; " \ 411 "fi\0" 412 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 413 "fel " 414 415 #define BOOT_TARGET_DEVICES(func) \ 416 func(FEL, fel, na) \ 417 BOOT_TARGET_DEVICES_MMC(func) \ 418 BOOT_TARGET_DEVICES_MMC_EXTRA(func) \ 419 BOOT_TARGET_DEVICES_SCSI(func) \ 420 BOOT_TARGET_DEVICES_USB(func) \ 421 func(PXE, pxe, na) \ 422 func(DHCP, dhcp, na) 423 424 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 425 #define BOOTCMD_SUNXI_COMPAT \ 426 "bootcmd_sunxi_compat=" \ 427 "setenv root /dev/mmcblk0p3 rootwait; " \ 428 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 429 "echo Loaded environment from uEnv.txt; " \ 430 "env import -t 0x44000000 ${filesize}; " \ 431 "fi; " \ 432 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 433 "ext2load mmc 0 0x43000000 script.bin && " \ 434 "ext2load mmc 0 0x48000000 uImage && " \ 435 "bootm 0x48000000\0" 436 #else 437 #define BOOTCMD_SUNXI_COMPAT 438 #endif 439 440 #include <config_distro_bootcmd.h> 441 442 #ifdef CONFIG_USB_KEYBOARD 443 #define CONSOLE_STDIN_SETTINGS \ 444 "preboot=usb start\0" \ 445 "stdin=serial,usbkbd\0" 446 #else 447 #define CONSOLE_STDIN_SETTINGS \ 448 "stdin=serial\0" 449 #endif 450 451 #ifdef CONFIG_VIDEO 452 #define CONSOLE_STDOUT_SETTINGS \ 453 "stdout=serial,vga\0" \ 454 "stderr=serial,vga\0" 455 #elif CONFIG_DM_VIDEO 456 #define CONFIG_SYS_WHITE_ON_BLACK 457 #define CONSOLE_STDOUT_SETTINGS \ 458 "stdout=serial,vidconsole\0" \ 459 "stderr=serial,vidconsole\0" 460 #else 461 #define CONSOLE_STDOUT_SETTINGS \ 462 "stdout=serial\0" \ 463 "stderr=serial\0" 464 #endif 465 466 #ifdef CONFIG_MTDIDS_DEFAULT 467 #define SUNXI_MTDIDS_DEFAULT \ 468 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 469 #else 470 #define SUNXI_MTDIDS_DEFAULT 471 #endif 472 473 #ifdef CONFIG_MTDPARTS_DEFAULT 474 #define SUNXI_MTDPARTS_DEFAULT \ 475 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 476 #else 477 #define SUNXI_MTDPARTS_DEFAULT 478 #endif 479 480 #define CONSOLE_ENV_SETTINGS \ 481 CONSOLE_STDIN_SETTINGS \ 482 CONSOLE_STDOUT_SETTINGS 483 484 #ifdef CONFIG_ARM64 485 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 486 #else 487 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 488 #endif 489 490 #define CONFIG_EXTRA_ENV_SETTINGS \ 491 CONSOLE_ENV_SETTINGS \ 492 MEM_LAYOUT_ENV_SETTINGS \ 493 DFU_ALT_INFO_RAM \ 494 "fdtfile=" FDTFILE "\0" \ 495 "console=ttyS0,115200\0" \ 496 SUNXI_MTDIDS_DEFAULT \ 497 SUNXI_MTDPARTS_DEFAULT \ 498 BOOTCMD_SUNXI_COMPAT \ 499 BOOTENV 500 501 #else /* ifndef CONFIG_SPL_BUILD */ 502 #define CONFIG_EXTRA_ENV_SETTINGS 503 #endif 504 505 #endif /* _SUNXI_COMMON_CONFIG_H */ 506