1 /* 2 * (C) Copyright 2009 3 * Net Insight <www.netinsight.net> 4 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> 5 * 6 * Based on sheevaplug.h: 7 * (C) Copyright 2009 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef _CONFIG_OPENRD_H 15 #define _CONFIG_OPENRD_H 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 21 #define CONFIG_KW88F6281 1 /* SOC Name */ 22 #define CONFIG_MACH_OPENRD_BASE /* Machine type */ 23 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 24 25 /* 26 * Commands configuration 27 */ 28 29 /* 30 * mv-common.h should be defined after CMD configs since it used them 31 * to enable certain macros 32 */ 33 #include "mv-common.h" 34 35 /* 36 * Environment variables configurations 37 */ 38 #ifdef CONFIG_CMD_NAND 39 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 40 #endif 41 /* 42 * max 4k env size is enough, but in case of nand 43 * it has to be rounded to sector size 44 */ 45 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 46 #define CONFIG_ENV_ADDR 0x60000 47 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 48 /* 49 * Environment is right behind U-Boot in flash. Make sure U-Boot 50 * doesn't grow into the environment area. 51 */ 52 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET 53 54 /* 55 * Default environment variables 56 */ 57 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 58 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 59 "${x_bootcmd_usb}; bootm 0x6400000;" 60 61 #define MTDIDS_DEFAULT "nand0=nand_mtd" 62 #define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\ 63 "0x400000@0x100000(uImage),"\ 64 "0x1fb00000@0x500000(rootfs)" 65 66 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 67 "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ 68 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 69 "x_bootcmd_usb=usb start\0" \ 70 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ 71 "mtdids="MTDIDS_DEFAULT"\0" \ 72 "mtdparts="MTDPARTS_DEFAULT"\0" 73 74 /* 75 * Ethernet Driver configuration 76 */ 77 #ifdef CONFIG_CMD_NET 78 # ifdef CONFIG_BOARD_IS_OPENRD_BASE 79 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 80 # else 81 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 82 # endif 83 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE 84 # define CONFIG_PHY_BASE_ADR 0x0 85 # define PHY_NO "88E1121" 86 # else 87 # define CONFIG_PHY_BASE_ADR 0x8 88 # define PHY_NO "88E1116" 89 # endif 90 #endif /* CONFIG_CMD_NET */ 91 92 /* 93 * SATA Driver configuration 94 */ 95 #ifdef CONFIG_MVSATA_IDE 96 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 97 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 98 #endif /*CONFIG_MVSATA_IDE*/ 99 100 #ifdef CONFIG_CMD_MMC 101 #define CONFIG_MVEBU_MMC 102 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 103 #endif /* CONFIG_CMD_MMC */ 104 105 #endif /* _CONFIG_OPENRD_BASE_H */ 106