1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * (C) Copyright 2009 8 * Frederik Kriewitz <frederik@kriewitz.eu> 9 * 10 * Configuration settings for the DevKit8000 board. 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 /* High Level Configuration Options */ 19 #define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 20 21 /* 22 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 23 * 64 bytes before this address should be set aside for u-boot.img's 24 * header. That is 0x800FFFC0--0x80100000 should not be used for any 25 * other needs. 26 */ 27 #define CONFIG_SYS_TEXT_BASE 0x80100000 28 29 #define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ 30 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 31 32 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 33 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ 34 35 /* Physical Memory Map */ 36 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 37 38 #include <configs/ti_omap3_common.h> 39 40 #define CONFIG_MISC_INIT_R 41 42 #define CONFIG_REVISION_TAG 1 43 44 /* Size of malloc() pool */ 45 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 46 /* Sector */ 47 #undef CONFIG_SYS_MALLOC_LEN 48 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 49 50 /* Hardware drivers */ 51 /* DM9000 */ 52 #define CONFIG_NET_RETRY_COUNT 20 53 #define CONFIG_DRIVER_DM9000 1 54 #define CONFIG_DM9000_BASE 0x2c000000 55 #define DM9000_IO CONFIG_DM9000_BASE 56 #define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) 57 #define CONFIG_DM9000_USE_16BIT 1 58 #define CONFIG_DM9000_NO_SROM 1 59 #undef CONFIG_DM9000_DEBUG 60 61 /* TWL4030 */ 62 #define CONFIG_TWL4030_LED 1 63 64 /* Board NAND Info */ 65 #define MTDIDS_DEFAULT "nand0=nand" 66 #define MTDPARTS_DEFAULT "mtdparts=nand:" \ 67 "512k(x-loader)," \ 68 "1920k(u-boot)," \ 69 "128k(u-boot-env)," \ 70 "4m(kernel)," \ 71 "-(fs)" 72 73 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 74 /* to access nand */ 75 #define CONFIG_JFFS2_NAND 76 /* nand device jffs2 lives on */ 77 #define CONFIG_JFFS2_DEV "nand0" 78 /* start of jffs2 partition */ 79 #define CONFIG_JFFS2_PART_OFFSET 0x680000 80 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 81 /* partition */ 82 83 #undef CONFIG_SUPPORT_RAW_INITRD 84 85 /* BOOTP/DHCP options */ 86 #define CONFIG_BOOTP_SUBNETMASK 87 #define CONFIG_BOOTP_GATEWAY 88 #define CONFIG_BOOTP_HOSTNAME 89 #define CONFIG_BOOTP_NISDOMAIN 90 #define CONFIG_BOOTP_BOOTPATH 91 #define CONFIG_BOOTP_BOOTFILESIZE 92 #define CONFIG_BOOTP_DNS 93 #define CONFIG_BOOTP_DNS2 94 #define CONFIG_BOOTP_SEND_HOSTNAME 95 #define CONFIG_BOOTP_NTPSERVER 96 #define CONFIG_BOOTP_TIMEOFFSET 97 #undef CONFIG_BOOTP_VENDOREX 98 99 /* Environment information */ 100 #define CONFIG_EXTRA_ENV_SETTINGS \ 101 "loadaddr=0x82000000\0" \ 102 "console=ttyO2,115200n8\0" \ 103 "mmcdev=0\0" \ 104 "vram=12M\0" \ 105 "dvimode=1024x768MR-16@60\0" \ 106 "defaultdisplay=dvi\0" \ 107 "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \ 108 "kernelopts=rw\0" \ 109 "commonargs=" \ 110 "setenv bootargs console=${console} " \ 111 "vram=${vram} " \ 112 "omapfb.mode=dvi:${dvimode} " \ 113 "omapdss.def_disp=${defaultdisplay}\0" \ 114 "mmcargs=" \ 115 "run commonargs; " \ 116 "setenv bootargs ${bootargs} " \ 117 "root=/dev/mmcblk0p2 " \ 118 "rootwait " \ 119 "${kernelopts}\0" \ 120 "nandargs=" \ 121 "run commonargs; " \ 122 "setenv bootargs ${bootargs} " \ 123 "omapfb.mode=dvi:${dvimode} " \ 124 "omapdss.def_disp=${defaultdisplay} " \ 125 "root=/dev/mtdblock4 " \ 126 "rootfstype=jffs2 " \ 127 "${kernelopts}\0" \ 128 "netargs=" \ 129 "run commonargs; " \ 130 "setenv bootargs ${bootargs} " \ 131 "root=/dev/nfs " \ 132 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 133 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \ 134 "${kernelopts} " \ 135 "dnsip1=${dnsip} " \ 136 "dnsip2=${dnsip2}\0" \ 137 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 138 "bootscript=echo Running bootscript from mmc ...; " \ 139 "source ${loadaddr}\0" \ 140 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 141 "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ 142 "mmcboot=echo Booting from mmc ...; " \ 143 "run mmcargs; " \ 144 "bootm ${loadaddr}\0" \ 145 "nandboot=echo Booting from nand ...; " \ 146 "run nandargs; " \ 147 "nand read ${loadaddr} 280000 400000; " \ 148 "bootm ${loadaddr}\0" \ 149 "netboot=echo Booting from network ...; " \ 150 "dhcp ${loadaddr}; " \ 151 "run netargs; " \ 152 "bootm ${loadaddr}\0" \ 153 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ 154 "if run loadbootscript; then " \ 155 "run bootscript; " \ 156 "else " \ 157 "if run loaduimage; then " \ 158 "run mmcboot; " \ 159 "else run nandboot; " \ 160 "fi; " \ 161 "fi; " \ 162 "else run nandboot; fi\0" 163 164 #define CONFIG_BOOTCOMMAND "run autoboot" 165 166 /* Boot Argument Buffer Size */ 167 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) 168 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ 169 0x01000000) /* 16MB */ 170 171 /* NAND and environment organization */ 172 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 173 174 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 175 176 /* SRAM config */ 177 #define CONFIG_SYS_SRAM_START 0x40200000 178 #define CONFIG_SYS_SRAM_SIZE 0x10000 179 180 /* Defines for SPL */ 181 182 #undef CONFIG_SPL_TEXT_BASE 183 #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ 184 185 /* NAND boot config */ 186 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 187 #define CONFIG_SYS_NAND_PAGE_COUNT 64 188 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 189 #define CONFIG_SYS_NAND_OOBSIZE 64 190 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 191 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 192 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 193 10, 11, 12, 13} 194 195 #define CONFIG_SYS_NAND_ECCSIZE 512 196 #define CONFIG_SYS_NAND_ECCBYTES 3 197 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 198 199 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 200 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 201 202 /* SPL OS boot options */ 203 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 204 205 #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 206 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 207 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 208 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */ 209 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */ 210 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */ 211 212 #undef CONFIG_SYS_SPL_ARGS_ADDR 213 #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) 214 215 #endif /* __CONFIG_H */ 216