1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * Configuation settings for the AT91SAM9RLEK board. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #include <asm/hardware.h> 15 16 #define CONFIG_SYS_TEXT_BASE 0x21F00000 17 18 /* ARM asynchronous clock */ 19 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 20 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */ 21 22 #define CONFIG_AT91SAM9RLEK 1 /* It's an AT91SAM9RLEK Board */ 23 24 #define CONFIG_ARCH_CPU_INIT 25 #define CONFIG_SKIP_LOWLEVEL_INIT 26 27 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 28 #define CONFIG_SETUP_MEMORY_TAGS 1 29 #define CONFIG_INITRD_TAG 1 30 31 #define CONFIG_ATMEL_LEGACY 32 33 /* 34 * Hardware drivers 35 */ 36 37 /* LCD */ 38 #define LCD_BPP LCD_COLOR8 39 #define CONFIG_LCD_LOGO 1 40 #undef LCD_TEST_PATTERN 41 #define CONFIG_LCD_INFO 1 42 #define CONFIG_LCD_INFO_BELOW_LOGO 1 43 #define CONFIG_ATMEL_LCD 1 44 #define CONFIG_ATMEL_LCD_RGB565 1 45 /* Let board_init_f handle the framebuffer allocation */ 46 #undef CONFIG_FB_ADDR 47 48 /* SDRAM */ 49 #define CONFIG_NR_DRAM_BANKS 1 50 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 51 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 52 53 #define CONFIG_SYS_INIT_SP_ADDR \ 54 (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE) 55 56 /* NAND flash */ 57 #ifdef CONFIG_CMD_NAND 58 #define CONFIG_SYS_MAX_NAND_DEVICE 1 59 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 60 #define CONFIG_SYS_NAND_DBW_8 1 61 /* our ALE is AD21 */ 62 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 63 /* our CLE is AD22 */ 64 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 65 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6 66 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17 67 68 #endif 69 70 /* Ethernet - not present */ 71 72 /* USB - not supported */ 73 74 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 75 76 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 77 #define CONFIG_SYS_MEMTEST_END 0x23e00000 78 79 #ifdef CONFIG_SYS_USE_DATAFLASH 80 81 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 82 #define CONFIG_ENV_OFFSET 0x4200 83 #define CONFIG_ENV_SIZE 0x4200 84 #define CONFIG_ENV_SECT_SIZE 0x210 85 #define CONFIG_ENV_SPI_MAX_HZ 15000000 86 #define CONFIG_BOOTCOMMAND "sf probe 0; " \ 87 "sf read 0x22000000 0x84000 0x294000; " \ 88 "bootm 0x22000000" 89 90 #elif CONFIG_SYS_USE_NANDFLASH 91 92 /* bootstrap + u-boot + env + linux in nandflash */ 93 #define CONFIG_ENV_OFFSET 0x120000 94 #define CONFIG_ENV_OFFSET_REDUND 0x100000 95 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 96 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x600000; " \ 97 "nand read 0x21000000 0x180000 0x80000; " \ 98 "bootz 0x22000000 - 0x21000000" 99 100 #else /* CONFIG_SYS_USE_MMC */ 101 102 /* bootstrap + u-boot + env + linux in mmc */ 103 #define CONFIG_ENV_SIZE 0x4000 104 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \ 105 "fatload mmc 0:1 0x22000000 zImage; " \ 106 "bootz 0x22000000 - 0x21000000" 107 #endif 108 109 #define CONFIG_SYS_LONGHELP 1 110 #define CONFIG_CMDLINE_EDITING 1 111 #define CONFIG_AUTO_COMPLETE 112 113 /* 114 * Size of malloc() pool 115 */ 116 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 117 118 #endif 119