1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) Freescale Semiconductor, Inc. 2006.
4 * Author: Jason Jin<Jason.jin@freescale.com>
5 * Zhang Wei<wei.zhang@freescale.com>
6 *
7 * with the reference on libata and ahci drvier in kernel
8 *
9 * This driver provides a SCSI interface to SATA.
10 */
11 #include <common.h>
12 #include <blk.h>
13 #include <log.h>
14 #include <linux/bitops.h>
15 #include <linux/delay.h>
16
17 #include <command.h>
18 #include <dm.h>
19 #include <pci.h>
20 #include <asm/processor.h>
21 #include <linux/errno.h>
22 #include <asm/io.h>
23 #include <malloc.h>
24 #include <memalign.h>
25 #include <pci.h>
26 #include <scsi.h>
27 #include <libata.h>
28 #include <linux/ctype.h>
29 #include <ahci.h>
30 #include <dm/device-internal.h>
31 #include <dm/lists.h>
32
33 static int ata_io_flush(struct ahci_uc_priv *uc_priv, u8 port);
34
35 #ifndef CONFIG_DM_SCSI
36 struct ahci_uc_priv *probe_ent = NULL;
37 #endif
38
39 #define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0)
40
41 /*
42 * Some controllers limit number of blocks they can read/write at once.
43 * Contemporary SSD devices work much faster if the read/write size is aligned
44 * to a power of 2. Let's set default to 128 and allowing to be overwritten if
45 * needed.
46 */
47 #ifndef MAX_SATA_BLOCKS_READ_WRITE
48 #define MAX_SATA_BLOCKS_READ_WRITE 0x80
49 #endif
50
51 /* Maximum timeouts for each event */
52 #define WAIT_MS_SPINUP 20000
53 #define WAIT_MS_DATAIO 10000
54 #define WAIT_MS_FLUSH 5000
55 #define WAIT_MS_LINKUP 200
56
57 #define AHCI_CAP_S64A BIT(31)
58
ahci_port_base(void __iomem * base,u32 port)59 __weak void __iomem *ahci_port_base(void __iomem *base, u32 port)
60 {
61 return base + 0x100 + (port * 0x80);
62 }
63
64 #define msleep(a) udelay(a * 1000)
65
ahci_dcache_flush_range(unsigned long begin,unsigned long len)66 static void ahci_dcache_flush_range(unsigned long begin, unsigned long len)
67 {
68 const unsigned long start = begin;
69 const unsigned long end = start + len;
70
71 debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end);
72 flush_dcache_range(start, end);
73 }
74
75 /*
76 * SATA controller DMAs to physical RAM. Ensure data from the
77 * controller is invalidated from dcache; next access comes from
78 * physical RAM.
79 */
ahci_dcache_invalidate_range(unsigned long begin,unsigned long len)80 static void ahci_dcache_invalidate_range(unsigned long begin, unsigned long len)
81 {
82 const unsigned long start = begin;
83 const unsigned long end = start + len;
84
85 debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end);
86 invalidate_dcache_range(start, end);
87 }
88
89 /*
90 * Ensure data for SATA controller is flushed out of dcache and
91 * written to physical memory.
92 */
ahci_dcache_flush_sata_cmd(struct ahci_ioports * pp)93 static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp)
94 {
95 ahci_dcache_flush_range((unsigned long)pp->cmd_slot,
96 AHCI_PORT_PRIV_DMA_SZ);
97 }
98
waiting_for_cmd_completed(void __iomem * offset,int timeout_msec,u32 sign)99 static int waiting_for_cmd_completed(void __iomem *offset,
100 int timeout_msec,
101 u32 sign)
102 {
103 int i;
104 u32 status;
105
106 for (i = 0; ((status = readl(offset)) & sign) && i < timeout_msec; i++)
107 msleep(1);
108
109 return (i < timeout_msec) ? 0 : -1;
110 }
111
ahci_link_up(struct ahci_uc_priv * uc_priv,u8 port)112 int __weak ahci_link_up(struct ahci_uc_priv *uc_priv, u8 port)
113 {
114 u32 tmp;
115 int j = 0;
116 void __iomem *port_mmio = uc_priv->port[port].port_mmio;
117
118 /*
119 * Bring up SATA link.
120 * SATA link bringup time is usually less than 1 ms; only very
121 * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
122 */
123 while (j < WAIT_MS_LINKUP) {
124 tmp = readl(port_mmio + PORT_SCR_STAT);
125 tmp &= PORT_SCR_STAT_DET_MASK;
126 if (tmp == PORT_SCR_STAT_DET_PHYRDY)
127 return 0;
128 udelay(1000);
129 j++;
130 }
131 return 1;
132 }
133
134 #ifdef CONFIG_SUNXI_AHCI
135 /* The sunxi AHCI controller requires this undocumented setup */
sunxi_dma_init(void __iomem * port_mmio)136 static void sunxi_dma_init(void __iomem *port_mmio)
137 {
138 clrsetbits_le32(port_mmio + PORT_P0DMACR, 0x0000ff00, 0x00004400);
139 }
140 #endif
141
ahci_reset(void __iomem * base)142 int ahci_reset(void __iomem *base)
143 {
144 int i = 1000;
145 u32 __iomem *host_ctl_reg = base + HOST_CTL;
146 u32 tmp = readl(host_ctl_reg); /* global controller reset */
147
148 if ((tmp & HOST_RESET) == 0)
149 writel_with_flush(tmp | HOST_RESET, host_ctl_reg);
150
151 /*
152 * reset must complete within 1 second, or
153 * the hardware should be considered fried.
154 */
155 do {
156 udelay(1000);
157 tmp = readl(host_ctl_reg);
158 i--;
159 } while ((i > 0) && (tmp & HOST_RESET));
160
161 if (i == 0) {
162 printf("controller reset failed (0x%x)\n", tmp);
163 return -1;
164 }
165
166 return 0;
167 }
168
ahci_host_init(struct ahci_uc_priv * uc_priv)169 static int ahci_host_init(struct ahci_uc_priv *uc_priv)
170 {
171 #if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
172 # ifdef CONFIG_DM_PCI
173 struct udevice *dev = uc_priv->dev;
174 struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
175 # else
176 pci_dev_t pdev = uc_priv->dev;
177 unsigned short vendor;
178 # endif
179 u16 tmp16;
180 #endif
181 void __iomem *mmio = uc_priv->mmio_base;
182 u32 tmp, cap_save, cmd;
183 int i, j, ret;
184 void __iomem *port_mmio;
185 u32 port_map;
186
187 debug("ahci_host_init: start\n");
188
189 cap_save = readl(mmio + HOST_CAP);
190 cap_save &= ((1 << 28) | (1 << 17));
191 cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */
192
193 ret = ahci_reset(uc_priv->mmio_base);
194 if (ret)
195 return ret;
196
197 writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL);
198 writel(cap_save, mmio + HOST_CAP);
199 writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
200
201 #if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
202 # ifdef CONFIG_DM_PCI
203 if (pplat->vendor == PCI_VENDOR_ID_INTEL) {
204 u16 tmp16;
205
206 dm_pci_read_config16(dev, 0x92, &tmp16);
207 dm_pci_write_config16(dev, 0x92, tmp16 | 0xf);
208 }
209 # else
210 pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
211
212 if (vendor == PCI_VENDOR_ID_INTEL) {
213 u16 tmp16;
214 pci_read_config_word(pdev, 0x92, &tmp16);
215 tmp16 |= 0xf;
216 pci_write_config_word(pdev, 0x92, tmp16);
217 }
218 # endif
219 #endif
220 uc_priv->cap = readl(mmio + HOST_CAP);
221 uc_priv->port_map = readl(mmio + HOST_PORTS_IMPL);
222 port_map = uc_priv->port_map;
223 uc_priv->n_ports = (uc_priv->cap & 0x1f) + 1;
224
225 debug("cap 0x%x port_map 0x%x n_ports %d\n",
226 uc_priv->cap, uc_priv->port_map, uc_priv->n_ports);
227
228 #if !defined(CONFIG_DM_SCSI)
229 if (uc_priv->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID)
230 uc_priv->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID;
231 #endif
232
233 for (i = 0; i < uc_priv->n_ports; i++) {
234 if (!(port_map & (1 << i)))
235 continue;
236 uc_priv->port[i].port_mmio = ahci_port_base(mmio, i);
237 port_mmio = (u8 *)uc_priv->port[i].port_mmio;
238
239 /* make sure port is not active */
240 tmp = readl(port_mmio + PORT_CMD);
241 if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
242 PORT_CMD_FIS_RX | PORT_CMD_START)) {
243 debug("Port %d is active. Deactivating.\n", i);
244 tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
245 PORT_CMD_FIS_RX | PORT_CMD_START);
246 writel_with_flush(tmp, port_mmio + PORT_CMD);
247
248 /* spec says 500 msecs for each bit, so
249 * this is slightly incorrect.
250 */
251 msleep(500);
252 }
253
254 #ifdef CONFIG_SUNXI_AHCI
255 sunxi_dma_init(port_mmio);
256 #endif
257
258 /* Add the spinup command to whatever mode bits may
259 * already be on in the command register.
260 */
261 cmd = readl(port_mmio + PORT_CMD);
262 cmd |= PORT_CMD_SPIN_UP;
263 writel_with_flush(cmd, port_mmio + PORT_CMD);
264
265 /* Bring up SATA link. */
266 ret = ahci_link_up(uc_priv, i);
267 if (ret) {
268 printf("SATA link %d timeout.\n", i);
269 continue;
270 } else {
271 debug("SATA link ok.\n");
272 }
273
274 /* Clear error status */
275 tmp = readl(port_mmio + PORT_SCR_ERR);
276 if (tmp)
277 writel(tmp, port_mmio + PORT_SCR_ERR);
278
279 debug("Spinning up device on SATA port %d... ", i);
280
281 j = 0;
282 while (j < WAIT_MS_SPINUP) {
283 tmp = readl(port_mmio + PORT_TFDATA);
284 if (!(tmp & (ATA_BUSY | ATA_DRQ)))
285 break;
286 udelay(1000);
287 tmp = readl(port_mmio + PORT_SCR_STAT);
288 tmp &= PORT_SCR_STAT_DET_MASK;
289 if (tmp == PORT_SCR_STAT_DET_PHYRDY)
290 break;
291 j++;
292 }
293
294 tmp = readl(port_mmio + PORT_SCR_STAT) & PORT_SCR_STAT_DET_MASK;
295 if (tmp == PORT_SCR_STAT_DET_COMINIT) {
296 debug("SATA link %d down (COMINIT received), retrying...\n", i);
297 i--;
298 continue;
299 }
300
301 printf("Target spinup took %d ms.\n", j);
302 if (j == WAIT_MS_SPINUP)
303 debug("timeout.\n");
304 else
305 debug("ok.\n");
306
307 tmp = readl(port_mmio + PORT_SCR_ERR);
308 debug("PORT_SCR_ERR 0x%x\n", tmp);
309 writel(tmp, port_mmio + PORT_SCR_ERR);
310
311 /* ack any pending irq events for this port */
312 tmp = readl(port_mmio + PORT_IRQ_STAT);
313 debug("PORT_IRQ_STAT 0x%x\n", tmp);
314 if (tmp)
315 writel(tmp, port_mmio + PORT_IRQ_STAT);
316
317 writel(1 << i, mmio + HOST_IRQ_STAT);
318
319 /* register linkup ports */
320 tmp = readl(port_mmio + PORT_SCR_STAT);
321 debug("SATA port %d status: 0x%x\n", i, tmp);
322 if ((tmp & PORT_SCR_STAT_DET_MASK) == PORT_SCR_STAT_DET_PHYRDY)
323 uc_priv->link_port_map |= (0x01 << i);
324 }
325
326 tmp = readl(mmio + HOST_CTL);
327 debug("HOST_CTL 0x%x\n", tmp);
328 writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
329 tmp = readl(mmio + HOST_CTL);
330 debug("HOST_CTL 0x%x\n", tmp);
331 #if !defined(CONFIG_DM_SCSI)
332 #ifndef CONFIG_SCSI_AHCI_PLAT
333 # ifdef CONFIG_DM_PCI
334 dm_pci_read_config16(dev, PCI_COMMAND, &tmp16);
335 tmp |= PCI_COMMAND_MASTER;
336 dm_pci_write_config16(dev, PCI_COMMAND, tmp16);
337 # else
338 pci_read_config_word(pdev, PCI_COMMAND, &tmp16);
339 tmp |= PCI_COMMAND_MASTER;
340 pci_write_config_word(pdev, PCI_COMMAND, tmp16);
341 # endif
342 #endif
343 #endif
344 return 0;
345 }
346
347
ahci_print_info(struct ahci_uc_priv * uc_priv)348 static void ahci_print_info(struct ahci_uc_priv *uc_priv)
349 {
350 #if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
351 # if defined(CONFIG_DM_PCI)
352 struct udevice *dev = uc_priv->dev;
353 # else
354 pci_dev_t pdev = uc_priv->dev;
355 # endif
356 u16 cc;
357 #endif
358 void __iomem *mmio = uc_priv->mmio_base;
359 u32 vers, cap, cap2, impl, speed;
360 const char *speed_s;
361 const char *scc_s;
362
363 vers = readl(mmio + HOST_VERSION);
364 cap = uc_priv->cap;
365 cap2 = readl(mmio + HOST_CAP2);
366 impl = uc_priv->port_map;
367
368 speed = (cap >> 20) & 0xf;
369 if (speed == 1)
370 speed_s = "1.5";
371 else if (speed == 2)
372 speed_s = "3";
373 else if (speed == 3)
374 speed_s = "6";
375 else
376 speed_s = "?";
377
378 #if defined(CONFIG_SCSI_AHCI_PLAT) || defined(CONFIG_DM_SCSI)
379 scc_s = "SATA";
380 #else
381 # ifdef CONFIG_DM_PCI
382 dm_pci_read_config16(dev, 0x0a, &cc);
383 # else
384 pci_read_config_word(pdev, 0x0a, &cc);
385 # endif
386 if (cc == 0x0101)
387 scc_s = "IDE";
388 else if (cc == 0x0106)
389 scc_s = "SATA";
390 else if (cc == 0x0104)
391 scc_s = "RAID";
392 else
393 scc_s = "unknown";
394 #endif
395 printf("AHCI %02x%02x.%02x%02x "
396 "%u slots %u ports %s Gbps 0x%x impl %s mode\n",
397 (vers >> 24) & 0xff,
398 (vers >> 16) & 0xff,
399 (vers >> 8) & 0xff,
400 vers & 0xff,
401 ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
402
403 printf("flags: "
404 "%s%s%s%s%s%s%s"
405 "%s%s%s%s%s%s%s"
406 "%s%s%s%s%s%s\n",
407 cap & (1 << 31) ? "64bit " : "",
408 cap & (1 << 30) ? "ncq " : "",
409 cap & (1 << 28) ? "ilck " : "",
410 cap & (1 << 27) ? "stag " : "",
411 cap & (1 << 26) ? "pm " : "",
412 cap & (1 << 25) ? "led " : "",
413 cap & (1 << 24) ? "clo " : "",
414 cap & (1 << 19) ? "nz " : "",
415 cap & (1 << 18) ? "only " : "",
416 cap & (1 << 17) ? "pmp " : "",
417 cap & (1 << 16) ? "fbss " : "",
418 cap & (1 << 15) ? "pio " : "",
419 cap & (1 << 14) ? "slum " : "",
420 cap & (1 << 13) ? "part " : "",
421 cap & (1 << 7) ? "ccc " : "",
422 cap & (1 << 6) ? "ems " : "",
423 cap & (1 << 5) ? "sxs " : "",
424 cap2 & (1 << 2) ? "apst " : "",
425 cap2 & (1 << 1) ? "nvmp " : "",
426 cap2 & (1 << 0) ? "boh " : "");
427 }
428
429 #if defined(CONFIG_DM_SCSI) || !defined(CONFIG_SCSI_AHCI_PLAT)
430 # if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
ahci_init_one(struct ahci_uc_priv * uc_priv,struct udevice * dev)431 static int ahci_init_one(struct ahci_uc_priv *uc_priv, struct udevice *dev)
432 # else
433 static int ahci_init_one(struct ahci_uc_priv *uc_priv, pci_dev_t dev)
434 # endif
435 {
436 #if !defined(CONFIG_DM_SCSI)
437 u16 vendor;
438 #endif
439 int rc;
440
441 uc_priv->dev = dev;
442
443 uc_priv->host_flags = ATA_FLAG_SATA
444 | ATA_FLAG_NO_LEGACY
445 | ATA_FLAG_MMIO
446 | ATA_FLAG_PIO_DMA
447 | ATA_FLAG_NO_ATAPI;
448 uc_priv->pio_mask = 0x1f;
449 uc_priv->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
450
451 #if !defined(CONFIG_DM_SCSI)
452 #ifdef CONFIG_DM_PCI
453 uc_priv->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5,
454 PCI_REGION_MEM);
455
456 /* Take from kernel:
457 * JMicron-specific fixup:
458 * make sure we're in AHCI mode
459 */
460 dm_pci_read_config16(dev, PCI_VENDOR_ID, &vendor);
461 if (vendor == 0x197b)
462 dm_pci_write_config8(dev, 0x41, 0xa1);
463 #else
464 uc_priv->mmio_base = pci_map_bar(dev, PCI_BASE_ADDRESS_5,
465 PCI_REGION_MEM);
466
467 /* Take from kernel:
468 * JMicron-specific fixup:
469 * make sure we're in AHCI mode
470 */
471 pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
472 if (vendor == 0x197b)
473 pci_write_config_byte(dev, 0x41, 0xa1);
474 #endif
475 #else
476 struct scsi_platdata *plat = dev_get_uclass_platdata(dev);
477 uc_priv->mmio_base = (void *)plat->base;
478 #endif
479
480 debug("ahci mmio_base=0x%p\n", uc_priv->mmio_base);
481 /* initialize adapter */
482 rc = ahci_host_init(uc_priv);
483 if (rc)
484 goto err_out;
485
486 ahci_print_info(uc_priv);
487
488 return 0;
489
490 err_out:
491 return rc;
492 }
493 #endif
494
495 #define MAX_DATA_BYTE_COUNT (4*1024*1024)
496
ahci_fill_sg(struct ahci_uc_priv * uc_priv,u8 port,unsigned char * buf,int buf_len)497 static int ahci_fill_sg(struct ahci_uc_priv *uc_priv, u8 port,
498 unsigned char *buf, int buf_len)
499 {
500 struct ahci_ioports *pp = &(uc_priv->port[port]);
501 struct ahci_sg *ahci_sg = pp->cmd_tbl_sg;
502 u32 sg_count;
503 int i;
504
505 sg_count = ((buf_len - 1) / MAX_DATA_BYTE_COUNT) + 1;
506 if (sg_count > AHCI_MAX_SG) {
507 printf("Error:Too much sg!\n");
508 return -1;
509 }
510
511 for (i = 0; i < sg_count; i++) {
512 /* We assume virt=phys */
513 phys_addr_t pa = (unsigned long)buf + i * MAX_DATA_BYTE_COUNT;
514
515 ahci_sg->addr = cpu_to_le32(lower_32_bits(pa));
516 ahci_sg->addr_hi = cpu_to_le32(upper_32_bits(pa));
517 if (ahci_sg->addr_hi && !(uc_priv->cap & AHCI_CAP_S64A)) {
518 printf("Error: DMA address too high\n");
519 return -1;
520 }
521 ahci_sg->flags_size = cpu_to_le32(0x3fffff &
522 (buf_len < MAX_DATA_BYTE_COUNT
523 ? (buf_len - 1)
524 : (MAX_DATA_BYTE_COUNT - 1)));
525 ahci_sg++;
526 buf_len -= MAX_DATA_BYTE_COUNT;
527 }
528
529 return sg_count;
530 }
531
532
ahci_fill_cmd_slot(struct ahci_ioports * pp,u32 opts)533 static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts)
534 {
535 pp->cmd_slot->opts = cpu_to_le32(opts);
536 pp->cmd_slot->status = 0;
537 pp->cmd_slot->tbl_addr = cpu_to_le32((u32)pp->cmd_tbl & 0xffffffff);
538 #ifdef CONFIG_PHYS_64BIT
539 pp->cmd_slot->tbl_addr_hi =
540 cpu_to_le32((u32)(((pp->cmd_tbl) >> 16) >> 16));
541 #endif
542 }
543
wait_spinup(void __iomem * port_mmio)544 static int wait_spinup(void __iomem *port_mmio)
545 {
546 ulong start;
547 u32 tf_data;
548
549 start = get_timer(0);
550 do {
551 tf_data = readl(port_mmio + PORT_TFDATA);
552 if (!(tf_data & ATA_BUSY))
553 return 0;
554 } while (get_timer(start) < WAIT_MS_SPINUP);
555
556 return -ETIMEDOUT;
557 }
558
ahci_port_start(struct ahci_uc_priv * uc_priv,u8 port)559 static int ahci_port_start(struct ahci_uc_priv *uc_priv, u8 port)
560 {
561 struct ahci_ioports *pp = &(uc_priv->port[port]);
562 void __iomem *port_mmio = pp->port_mmio;
563 u64 dma_addr;
564 u32 port_status;
565 void __iomem *mem;
566
567 debug("Enter start port: %d\n", port);
568 port_status = readl(port_mmio + PORT_SCR_STAT);
569 debug("Port %d status: %x\n", port, port_status);
570 if ((port_status & 0xf) != 0x03) {
571 printf("No Link on this port!\n");
572 return -1;
573 }
574
575 mem = memalign(2048, AHCI_PORT_PRIV_DMA_SZ);
576 if (!mem) {
577 free(pp);
578 printf("%s: No mem for table!\n", __func__);
579 return -ENOMEM;
580 }
581 memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
582
583 /*
584 * First item in chunk of DMA memory: 32-slot command table,
585 * 32 bytes each in size
586 */
587 pp->cmd_slot =
588 (struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem);
589 debug("cmd_slot = %p\n", pp->cmd_slot);
590 mem += (AHCI_CMD_SLOT_SZ + 224);
591
592 /*
593 * Second item: Received-FIS area
594 */
595 pp->rx_fis = virt_to_phys((void *)mem);
596 mem += AHCI_RX_FIS_SZ;
597
598 /*
599 * Third item: data area for storing a single command
600 * and its scatter-gather table
601 */
602 pp->cmd_tbl = virt_to_phys((void *)mem);
603 debug("cmd_tbl_dma = %lx\n", pp->cmd_tbl);
604
605 mem += AHCI_CMD_TBL_HDR;
606 pp->cmd_tbl_sg =
607 (struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem);
608
609 dma_addr = (ulong)pp->cmd_slot;
610 writel_with_flush(dma_addr, port_mmio + PORT_LST_ADDR);
611 writel_with_flush(dma_addr >> 32, port_mmio + PORT_LST_ADDR_HI);
612 dma_addr = (ulong)pp->rx_fis;
613 writel_with_flush(dma_addr, port_mmio + PORT_FIS_ADDR);
614 writel_with_flush(dma_addr >> 32, port_mmio + PORT_FIS_ADDR_HI);
615
616 #ifdef CONFIG_SUNXI_AHCI
617 sunxi_dma_init(port_mmio);
618 #endif
619
620 writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
621 PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
622 PORT_CMD_START, port_mmio + PORT_CMD);
623
624 debug("Exit start port %d\n", port);
625
626 /*
627 * Make sure interface is not busy based on error and status
628 * information from task file data register before proceeding
629 */
630 return wait_spinup(port_mmio);
631 }
632
633
ahci_device_data_io(struct ahci_uc_priv * uc_priv,u8 port,u8 * fis,int fis_len,u8 * buf,int buf_len,u8 is_write)634 static int ahci_device_data_io(struct ahci_uc_priv *uc_priv, u8 port, u8 *fis,
635 int fis_len, u8 *buf, int buf_len, u8 is_write)
636 {
637
638 struct ahci_ioports *pp = &(uc_priv->port[port]);
639 void __iomem *port_mmio = pp->port_mmio;
640 u32 opts;
641 u32 port_status;
642 int sg_count;
643
644 debug("Enter %s: for port %d\n", __func__, port);
645
646 if (port > uc_priv->n_ports) {
647 printf("Invalid port number %d\n", port);
648 return -1;
649 }
650
651 port_status = readl(port_mmio + PORT_SCR_STAT);
652 if ((port_status & 0xf) != 0x03) {
653 debug("No Link on port %d!\n", port);
654 return -1;
655 }
656
657 memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len);
658
659 sg_count = ahci_fill_sg(uc_priv, port, buf, buf_len);
660 opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6);
661 ahci_fill_cmd_slot(pp, opts);
662
663 ahci_dcache_flush_sata_cmd(pp);
664 ahci_dcache_flush_range((unsigned long)buf, (unsigned long)buf_len);
665
666 writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
667
668 if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
669 WAIT_MS_DATAIO, 0x1)) {
670 printf("timeout exit!\n");
671 return -1;
672 }
673
674 ahci_dcache_invalidate_range((unsigned long)buf,
675 (unsigned long)buf_len);
676 debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status);
677
678 return 0;
679 }
680
681
ata_id_strcpy(u16 * target,u16 * src,int len)682 static char *ata_id_strcpy(u16 *target, u16 *src, int len)
683 {
684 int i;
685 for (i = 0; i < len / 2; i++)
686 target[i] = swab16(src[i]);
687 return (char *)target;
688 }
689
690 /*
691 * SCSI INQUIRY command operation.
692 */
ata_scsiop_inquiry(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb)693 static int ata_scsiop_inquiry(struct ahci_uc_priv *uc_priv,
694 struct scsi_cmd *pccb)
695 {
696 static const u8 hdr[] = {
697 0,
698 0,
699 0x5, /* claim SPC-3 version compatibility */
700 2,
701 95 - 4,
702 };
703 u8 fis[20];
704 u16 *idbuf;
705 ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
706 u8 port;
707
708 /* Clean ccb data buffer */
709 memset(pccb->pdata, 0, pccb->datalen);
710
711 memcpy(pccb->pdata, hdr, sizeof(hdr));
712
713 if (pccb->datalen <= 35)
714 return 0;
715
716 memset(fis, 0, sizeof(fis));
717 /* Construct the FIS */
718 fis[0] = 0x27; /* Host to device FIS. */
719 fis[1] = 1 << 7; /* Command FIS. */
720 fis[2] = ATA_CMD_ID_ATA; /* Command byte. */
721
722 /* Read id from sata */
723 port = pccb->target;
724
725 if (ahci_device_data_io(uc_priv, port, (u8 *)&fis, sizeof(fis),
726 (u8 *)tmpid, ATA_ID_WORDS * 2, 0)) {
727 debug("scsi_ahci: SCSI inquiry command failure.\n");
728 return -EIO;
729 }
730
731 if (!uc_priv->ataid[port]) {
732 uc_priv->ataid[port] = malloc(ATA_ID_WORDS * 2);
733 if (!uc_priv->ataid[port]) {
734 printf("%s: No memory for ataid[port]\n", __func__);
735 return -ENOMEM;
736 }
737 }
738
739 idbuf = uc_priv->ataid[port];
740
741 memcpy(idbuf, tmpid, ATA_ID_WORDS * 2);
742 ata_swap_buf_le16(idbuf, ATA_ID_WORDS);
743
744 memcpy(&pccb->pdata[8], "ATA ", 8);
745 ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16);
746 ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4);
747
748 #ifdef DEBUG
749 ata_dump_id(idbuf);
750 #endif
751 return 0;
752 }
753
754
755 /*
756 * SCSI READ10/WRITE10 command operation.
757 */
ata_scsiop_read_write(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb,u8 is_write)758 static int ata_scsiop_read_write(struct ahci_uc_priv *uc_priv,
759 struct scsi_cmd *pccb, u8 is_write)
760 {
761 lbaint_t lba = 0;
762 u16 blocks = 0;
763 u8 fis[20];
764 u8 *user_buffer = pccb->pdata;
765 u32 user_buffer_size = pccb->datalen;
766
767 /* Retrieve the base LBA number from the ccb structure. */
768 if (pccb->cmd[0] == SCSI_READ16) {
769 memcpy(&lba, pccb->cmd + 2, 8);
770 lba = be64_to_cpu(lba);
771 } else {
772 u32 temp;
773 memcpy(&temp, pccb->cmd + 2, 4);
774 lba = be32_to_cpu(temp);
775 }
776
777 /*
778 * Retrieve the base LBA number and the block count from
779 * the ccb structure.
780 *
781 * For 10-byte and 16-byte SCSI R/W commands, transfer
782 * length 0 means transfer 0 block of data.
783 * However, for ATA R/W commands, sector count 0 means
784 * 256 or 65536 sectors, not 0 sectors as in SCSI.
785 *
786 * WARNING: one or two older ATA drives treat 0 as 0...
787 */
788 if (pccb->cmd[0] == SCSI_READ16)
789 blocks = (((u16)pccb->cmd[13]) << 8) | ((u16) pccb->cmd[14]);
790 else
791 blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
792
793 debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n",
794 is_write ? "write" : "read", blocks, lba);
795
796 /* Preset the FIS */
797 memset(fis, 0, sizeof(fis));
798 fis[0] = 0x27; /* Host to device FIS. */
799 fis[1] = 1 << 7; /* Command FIS. */
800 /* Command byte (read/write). */
801 fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT;
802
803 while (blocks) {
804 u16 now_blocks; /* number of blocks per iteration */
805 u32 transfer_size; /* number of bytes per iteration */
806
807 now_blocks = min((u16)MAX_SATA_BLOCKS_READ_WRITE, blocks);
808
809 transfer_size = ATA_SECT_SIZE * now_blocks;
810 if (transfer_size > user_buffer_size) {
811 printf("scsi_ahci: Error: buffer too small.\n");
812 return -EIO;
813 }
814
815 /*
816 * LBA48 SATA command but only use 32bit address range within
817 * that (unless we've enabled 64bit LBA support). The next
818 * smaller command range (28bit) is too small.
819 */
820 fis[4] = (lba >> 0) & 0xff;
821 fis[5] = (lba >> 8) & 0xff;
822 fis[6] = (lba >> 16) & 0xff;
823 fis[7] = 1 << 6; /* device reg: set LBA mode */
824 fis[8] = ((lba >> 24) & 0xff);
825 #ifdef CONFIG_SYS_64BIT_LBA
826 if (pccb->cmd[0] == SCSI_READ16) {
827 fis[9] = ((lba >> 32) & 0xff);
828 fis[10] = ((lba >> 40) & 0xff);
829 }
830 #endif
831
832 fis[3] = 0xe0; /* features */
833
834 /* Block (sector) count */
835 fis[12] = (now_blocks >> 0) & 0xff;
836 fis[13] = (now_blocks >> 8) & 0xff;
837
838 /* Read/Write from ahci */
839 if (ahci_device_data_io(uc_priv, pccb->target, (u8 *)&fis,
840 sizeof(fis), user_buffer, transfer_size,
841 is_write)) {
842 debug("scsi_ahci: SCSI %s10 command failure.\n",
843 is_write ? "WRITE" : "READ");
844 return -EIO;
845 }
846
847 /* If this transaction is a write, do a following flush.
848 * Writes in u-boot are so rare, and the logic to know when is
849 * the last write and do a flush only there is sufficiently
850 * difficult. Just do a flush after every write. This incurs,
851 * usually, one extra flush when the rare writes do happen.
852 */
853 if (is_write) {
854 if (-EIO == ata_io_flush(uc_priv, pccb->target))
855 return -EIO;
856 }
857 user_buffer += transfer_size;
858 user_buffer_size -= transfer_size;
859 blocks -= now_blocks;
860 lba += now_blocks;
861 }
862
863 return 0;
864 }
865
866
867 /*
868 * SCSI READ CAPACITY10 command operation.
869 */
ata_scsiop_read_capacity10(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb)870 static int ata_scsiop_read_capacity10(struct ahci_uc_priv *uc_priv,
871 struct scsi_cmd *pccb)
872 {
873 u32 cap;
874 u64 cap64;
875 u32 block_size;
876
877 if (!uc_priv->ataid[pccb->target]) {
878 printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
879 "\tNo ATA info!\n"
880 "\tPlease run SCSI command INQUIRY first!\n");
881 return -EPERM;
882 }
883
884 cap64 = ata_id_n_sectors(uc_priv->ataid[pccb->target]);
885 if (cap64 > 0x100000000ULL)
886 cap64 = 0xffffffff;
887
888 cap = cpu_to_be32(cap64);
889 memcpy(pccb->pdata, &cap, sizeof(cap));
890
891 block_size = cpu_to_be32((u32)512);
892 memcpy(&pccb->pdata[4], &block_size, 4);
893
894 return 0;
895 }
896
897
898 /*
899 * SCSI READ CAPACITY16 command operation.
900 */
ata_scsiop_read_capacity16(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb)901 static int ata_scsiop_read_capacity16(struct ahci_uc_priv *uc_priv,
902 struct scsi_cmd *pccb)
903 {
904 u64 cap;
905 u64 block_size;
906
907 if (!uc_priv->ataid[pccb->target]) {
908 printf("scsi_ahci: SCSI READ CAPACITY16 command failure. "
909 "\tNo ATA info!\n"
910 "\tPlease run SCSI command INQUIRY first!\n");
911 return -EPERM;
912 }
913
914 cap = ata_id_n_sectors(uc_priv->ataid[pccb->target]);
915 cap = cpu_to_be64(cap);
916 memcpy(pccb->pdata, &cap, sizeof(cap));
917
918 block_size = cpu_to_be64((u64)512);
919 memcpy(&pccb->pdata[8], &block_size, 8);
920
921 return 0;
922 }
923
924
925 /*
926 * SCSI TEST UNIT READY command operation.
927 */
ata_scsiop_test_unit_ready(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb)928 static int ata_scsiop_test_unit_ready(struct ahci_uc_priv *uc_priv,
929 struct scsi_cmd *pccb)
930 {
931 return (uc_priv->ataid[pccb->target]) ? 0 : -EPERM;
932 }
933
934
ahci_scsi_exec(struct udevice * dev,struct scsi_cmd * pccb)935 static int ahci_scsi_exec(struct udevice *dev, struct scsi_cmd *pccb)
936 {
937 struct ahci_uc_priv *uc_priv;
938 #ifdef CONFIG_DM_SCSI
939 uc_priv = dev_get_uclass_priv(dev->parent);
940 #else
941 uc_priv = probe_ent;
942 #endif
943 int ret;
944
945 switch (pccb->cmd[0]) {
946 case SCSI_READ16:
947 case SCSI_READ10:
948 ret = ata_scsiop_read_write(uc_priv, pccb, 0);
949 break;
950 case SCSI_WRITE10:
951 ret = ata_scsiop_read_write(uc_priv, pccb, 1);
952 break;
953 case SCSI_RD_CAPAC10:
954 ret = ata_scsiop_read_capacity10(uc_priv, pccb);
955 break;
956 case SCSI_RD_CAPAC16:
957 ret = ata_scsiop_read_capacity16(uc_priv, pccb);
958 break;
959 case SCSI_TST_U_RDY:
960 ret = ata_scsiop_test_unit_ready(uc_priv, pccb);
961 break;
962 case SCSI_INQUIRY:
963 ret = ata_scsiop_inquiry(uc_priv, pccb);
964 break;
965 default:
966 printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]);
967 return -ENOTSUPP;
968 }
969
970 if (ret) {
971 debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
972 return ret;
973 }
974 return 0;
975
976 }
977
ahci_start_ports(struct ahci_uc_priv * uc_priv)978 static int ahci_start_ports(struct ahci_uc_priv *uc_priv)
979 {
980 u32 linkmap;
981 int i;
982
983 linkmap = uc_priv->link_port_map;
984
985 for (i = 0; i < uc_priv->n_ports; i++) {
986 if (((linkmap >> i) & 0x01)) {
987 if (ahci_port_start(uc_priv, (u8) i)) {
988 printf("Can not start port %d\n", i);
989 continue;
990 }
991 }
992 }
993
994 return 0;
995 }
996
997 #ifndef CONFIG_DM_SCSI
scsi_low_level_init(int busdevfunc)998 void scsi_low_level_init(int busdevfunc)
999 {
1000 struct ahci_uc_priv *uc_priv;
1001
1002 #ifndef CONFIG_SCSI_AHCI_PLAT
1003 probe_ent = calloc(1, sizeof(struct ahci_uc_priv));
1004 if (!probe_ent) {
1005 printf("%s: No memory for uc_priv\n", __func__);
1006 return;
1007 }
1008 uc_priv = probe_ent;
1009 # if defined(CONFIG_DM_PCI)
1010 struct udevice *dev;
1011 int ret;
1012
1013 ret = dm_pci_bus_find_bdf(busdevfunc, &dev);
1014 if (ret)
1015 return;
1016 ahci_init_one(uc_priv, dev);
1017 # else
1018 ahci_init_one(uc_priv, busdevfunc);
1019 # endif
1020 #else
1021 uc_priv = probe_ent;
1022 #endif
1023
1024 ahci_start_ports(uc_priv);
1025 }
1026 #endif
1027
1028 #ifndef CONFIG_SCSI_AHCI_PLAT
1029 # if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
achi_init_one_dm(struct udevice * dev)1030 int achi_init_one_dm(struct udevice *dev)
1031 {
1032 struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev);
1033
1034 return ahci_init_one(uc_priv, dev);
1035 }
1036 #endif
1037 #endif
1038
achi_start_ports_dm(struct udevice * dev)1039 int achi_start_ports_dm(struct udevice *dev)
1040 {
1041 struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev);
1042
1043 return ahci_start_ports(uc_priv);
1044 }
1045
1046 #ifdef CONFIG_SCSI_AHCI_PLAT
ahci_init_common(struct ahci_uc_priv * uc_priv,void __iomem * base)1047 static int ahci_init_common(struct ahci_uc_priv *uc_priv, void __iomem *base)
1048 {
1049 int rc;
1050
1051 uc_priv->host_flags = ATA_FLAG_SATA
1052 | ATA_FLAG_NO_LEGACY
1053 | ATA_FLAG_MMIO
1054 | ATA_FLAG_PIO_DMA
1055 | ATA_FLAG_NO_ATAPI;
1056 uc_priv->pio_mask = 0x1f;
1057 uc_priv->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
1058
1059 uc_priv->mmio_base = base;
1060
1061 /* initialize adapter */
1062 rc = ahci_host_init(uc_priv);
1063 if (rc)
1064 goto err_out;
1065
1066 ahci_print_info(uc_priv);
1067
1068 rc = ahci_start_ports(uc_priv);
1069
1070 err_out:
1071 return rc;
1072 }
1073
1074 #ifndef CONFIG_DM_SCSI
ahci_init(void __iomem * base)1075 int ahci_init(void __iomem *base)
1076 {
1077 struct ahci_uc_priv *uc_priv;
1078
1079 probe_ent = malloc(sizeof(struct ahci_uc_priv));
1080 if (!probe_ent) {
1081 printf("%s: No memory for uc_priv\n", __func__);
1082 return -ENOMEM;
1083 }
1084
1085 uc_priv = probe_ent;
1086 memset(uc_priv, 0, sizeof(struct ahci_uc_priv));
1087
1088 return ahci_init_common(uc_priv, base);
1089 }
1090 #endif
1091
ahci_init_dm(struct udevice * dev,void __iomem * base)1092 int ahci_init_dm(struct udevice *dev, void __iomem *base)
1093 {
1094 struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev);
1095
1096 return ahci_init_common(uc_priv, base);
1097 }
1098
scsi_init(void)1099 void __weak scsi_init(void)
1100 {
1101 }
1102
1103 #endif /* CONFIG_SCSI_AHCI_PLAT */
1104
1105 /*
1106 * In the general case of generic rotating media it makes sense to have a
1107 * flush capability. It probably even makes sense in the case of SSDs because
1108 * one cannot always know for sure what kind of internal cache/flush mechanism
1109 * is embodied therein. At first it was planned to invoke this after the last
1110 * write to disk and before rebooting. In practice, knowing, a priori, which
1111 * is the last write is difficult. Because writing to the disk in u-boot is
1112 * very rare, this flush command will be invoked after every block write.
1113 */
ata_io_flush(struct ahci_uc_priv * uc_priv,u8 port)1114 static int ata_io_flush(struct ahci_uc_priv *uc_priv, u8 port)
1115 {
1116 u8 fis[20];
1117 struct ahci_ioports *pp = &(uc_priv->port[port]);
1118 void __iomem *port_mmio = pp->port_mmio;
1119 u32 cmd_fis_len = 5; /* five dwords */
1120
1121 /* Preset the FIS */
1122 memset(fis, 0, 20);
1123 fis[0] = 0x27; /* Host to device FIS. */
1124 fis[1] = 1 << 7; /* Command FIS. */
1125 fis[2] = ATA_CMD_FLUSH_EXT;
1126
1127 memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
1128 ahci_fill_cmd_slot(pp, cmd_fis_len);
1129 ahci_dcache_flush_sata_cmd(pp);
1130 writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
1131
1132 if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
1133 WAIT_MS_FLUSH, 0x1)) {
1134 debug("scsi_ahci: flush command timeout on port %d.\n", port);
1135 return -EIO;
1136 }
1137
1138 return 0;
1139 }
1140
ahci_scsi_bus_reset(struct udevice * dev)1141 static int ahci_scsi_bus_reset(struct udevice *dev)
1142 {
1143 /* Not implemented */
1144
1145 return 0;
1146 }
1147
1148 #ifdef CONFIG_DM_SCSI
ahci_bind_scsi(struct udevice * ahci_dev,struct udevice ** devp)1149 int ahci_bind_scsi(struct udevice *ahci_dev, struct udevice **devp)
1150 {
1151 struct udevice *dev;
1152 int ret;
1153
1154 ret = device_bind_driver(ahci_dev, "ahci_scsi", "ahci_scsi", &dev);
1155 if (ret)
1156 return ret;
1157 *devp = dev;
1158
1159 return 0;
1160 }
1161
ahci_probe_scsi(struct udevice * ahci_dev,ulong base)1162 int ahci_probe_scsi(struct udevice *ahci_dev, ulong base)
1163 {
1164 struct ahci_uc_priv *uc_priv;
1165 struct scsi_platdata *uc_plat;
1166 struct udevice *dev;
1167 int ret;
1168
1169 device_find_first_child(ahci_dev, &dev);
1170 if (!dev)
1171 return -ENODEV;
1172 uc_plat = dev_get_uclass_platdata(dev);
1173 uc_plat->base = base;
1174 uc_plat->max_lun = 1;
1175 uc_plat->max_id = 2;
1176
1177 uc_priv = dev_get_uclass_priv(ahci_dev);
1178 ret = ahci_init_one(uc_priv, dev);
1179 if (ret)
1180 return ret;
1181 ret = ahci_start_ports(uc_priv);
1182 if (ret)
1183 return ret;
1184
1185 /*
1186 * scsi_scan_dev() scans devices up-to the number of max_id.
1187 * Update max_id if the number of detected ports exceeds max_id.
1188 * This allows SCSI to scan all detected ports.
1189 */
1190 uc_plat->max_id = max_t(unsigned long, uc_priv->n_ports,
1191 uc_plat->max_id);
1192 /* If port count is less than max_id, update max_id */
1193 if (uc_priv->n_ports < uc_plat->max_id)
1194 uc_plat->max_id = uc_priv->n_ports;
1195
1196 return 0;
1197 }
1198
1199 #ifdef CONFIG_DM_PCI
ahci_probe_scsi_pci(struct udevice * ahci_dev)1200 int ahci_probe_scsi_pci(struct udevice *ahci_dev)
1201 {
1202 ulong base;
1203
1204 base = (ulong)dm_pci_map_bar(ahci_dev, PCI_BASE_ADDRESS_5,
1205 PCI_REGION_MEM);
1206
1207 return ahci_probe_scsi(ahci_dev, base);
1208 }
1209 #endif
1210
1211 struct scsi_ops scsi_ops = {
1212 .exec = ahci_scsi_exec,
1213 .bus_reset = ahci_scsi_bus_reset,
1214 };
1215
1216 U_BOOT_DRIVER(ahci_scsi) = {
1217 .name = "ahci_scsi",
1218 .id = UCLASS_SCSI,
1219 .ops = &scsi_ops,
1220 };
1221 #else
scsi_exec(struct udevice * dev,struct scsi_cmd * pccb)1222 int scsi_exec(struct udevice *dev, struct scsi_cmd *pccb)
1223 {
1224 return ahci_scsi_exec(dev, pccb);
1225 }
1226
scsi_bus_reset(struct udevice * dev)1227 __weak int scsi_bus_reset(struct udevice *dev)
1228 {
1229 return ahci_scsi_bus_reset(dev);
1230
1231 return 0;
1232 }
1233 #endif
1234