xref: /OK3568_Linux_fs/u-boot/arch/arm/mach-rockchip/Kconfig (revision 4882a59341e53eb6f0b4789bf948001014eff981)

if ARCH_ROCKCHIP

config ROCKCHIP_PX30
	bool "Support Rockchip PX30"
	select ARM64 if !ARM64_BOOT_AARCH32
	select GICV2
	select ARM_SMCCC
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL if !ARM64_BOOT_AARCH32
	select TPL if !ARM64_BOOT_AARCH32
	select TPL_TINY_FRAMEWORK if TPL

	imply SPL_SEPARATE_BSS
	imply SPL_SERIAL_SUPPORT
	imply TPL_SERIAL_SUPPORT
	help
	  The Rockchip PX30 is a ARM-based SoC with a quad-core Cortex-A35
	  including NEON and GPU, Mali-400 graphics, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.

if ROCKCHIP_PX30

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"

config TPL_TEXT_BASE
	default 0xff0e1000

config TPL_MAX_SIZE
	default 10240

config ROCKCHIP_RK3326
	bool "Support Rockchip RK3326 "
	help
	  RK3326 can use most code from PX30, but at some situations we have
	  to distinguish between RK3326 and PX30, so this macro gives help.
	  It is usually selected in rk3326 board defconfig.
endif

config ROCKCHIP_RK3036
	bool "Support Rockchip RK3036"
	select CPU_V7
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select TPL
	select BOARD_LATE_INIT
	select ROCKCHIP_BROM_HELPER
	select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	select ARM_SMCCC
	help
	  The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7
	  including NEON and GPU, Mali-400 graphics, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.

config ROCKCHIP_RK3128
	bool "Support Rockchip RK3128"
	select CPU_V7
	select GICV2
	select ARM_SMCCC
	help
	  The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7
	  including NEON and GPU, Mali-400 graphics, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.

if ROCKCHIP_RK3128

config ROCKCHIP_RK3126
	bool "Support Rockchip RK3126 "
	help
	  RK3126 can use most code from RK3128, but at some situations we have
	  to distinguish between RK3126 and RK3128, so this macro gives help.
	  It is usually selected in rk3126 board defconfig.

config ROCKCHIP_PX3SE
	bool "Support Rockchip PX3SE"
	help
	  PX3SE is a variant of RK3128, it shares codes with RK3128, but we still
	  need this macro to distinguish PX3SE and RK3128.
endif

config ROCKCHIP_RK3066
	bool "Support Rockchip RK3066"
	select CPU_V7
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select TPL
	select BOARD_LATE_INIT
	select ROCKCHIP_BROM_HELPER
	select SPL_ROCKCHIP_EARLYRETURN_TO_BROM
	help
	  The Rockchip RK3066 is a ARM-based SoC with a dual-core Cortex-A9
	  including NEON and GPU, Mali-400 graphics, several DDR3 options
	  and video codec support. Peripherals include ethernet, USB2 host
	  and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.

config ROCKCHIP_RK3188
	bool "Support Rockchip RK3188"
	select CPU_V7
	select SPL_BOARD_INIT if SPL
	select SUPPORT_SPL
	select SPL
	select SPL_CLK
	select SPL_REGMAP
	select SPL_SYSCON
	select SPL_RAM
	select SPL_DRIVERS_MISC_SUPPORT
	select SPL_ROCKCHIP_EARLYRETURN_TO_BROM
	select BOARD_LATE_INIT
	select ROCKCHIP_BROM_HELPER
	help
	  The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9
	  including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two
	  video interfaces, several memory options and video codec support.
	  Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S,
	  UART, SPI, I2C and PWMs.

config ROCKCHIP_RK322X
	bool "Support Rockchip RK3228/RK3229"
	select CPU_V7
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select TPL
	select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	select SPL_DRIVERS_MISC_SUPPORT
	imply SPL_SERIAL_SUPPORT
	imply TPL_SERIAL_SUPPORT
	select ROCKCHIP_BROM_HELPER
	select TPL_LIBCOMMON_SUPPORT
	select TPL_LIBGENERIC_SUPPORT
	select GICV2
	select ARM_SMCCC
	help
	  The Rockchip RK3229 is a ARM-based SoC with a dual-core Cortex-A7
	  including NEON and GPU, Mali-400 graphics, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.

if ROCKCHIP_RK322X

config ROCKCHIP_RK3128X
	bool "Support Rockchip RK3128X "
	help
	  RK3128X can use most code from RK322X, but at some situations we have
	  to distinguish between RK3128X and RK322X, so this macro gives help.
	  It is usually selected in RK3128X board defconfig.
endif

config ROCKCHIP_RK3288
	bool "Support Rockchip RK3288"
	select CPU_V7
	select SPL_BOARD_INIT if SPL
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select TPL
	select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	imply TPL_SERIAL_SUPPORT
	select GICV2
	select ARM_SMCCC
	select SPL_OPTEE
	select FIT
	select SPL_LOAD_FIT
	select TPL_LIBCOMMON_SUPPORT
	select TPL_LIBGENERIC_SUPPORT
	select TPL_SYS_MALLOC_SIMPLE
	select TPL_BOOTROM_SUPPORT
	select TPL_DRIVERS_MISC_SUPPORT
	select TPL_OF_CONTROL
	select TPL_DM
	select TPL_REGMAP
	select TPL_SYSCON
	select TPL_RAM
	select TPL_CLK
	select TPL_TINY_MEMSET
	help
	  The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17
	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
	  video interfaces supporting HDMI and eDP, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.

if ROCKCHIP_RK3288
config SPL_FIT_GENERATOR
	default "arch/arm/mach-rockchip/make_fit_optee.sh"

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl.lds"

config TPL_TEXT_BASE
	default 0xff704000

config TPL_MAX_SIZE
	default 32768

config TPL_STACK
	default 0xff718000

endif

config ROCKCHIP_RK3308
	bool "Support Rockchip RK3308"
	select ARM64 if !ARM64_BOOT_AARCH32
	select ARM_SMCCC
	imply GICV2
	select SUPPORT_SPL if !ARM64_BOOT_AARCH32
	select SUPPORT_TPL if !ARM64_BOOT_AARCH32
	select SPL if !ARM64_BOOT_AARCH32
	select TPL if !ARM64_BOOT_AARCH32
	imply SPL_CLK
	imply SPL_REGMAP
	imply SPL_SYSCON
	imply SPL_RAM
	imply SPL_SERIAL_SUPPORT
	imply TPL_SERIAL_SUPPORT
	imply SPL_SEPARATE_BSS
	help
	  The Rockchip RK3308 is a ARM-based Soc which embeded with quad
	  Cortex-A35 and highly integrated audio interfaces.

if ROCKCHIP_RK3308

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"

config TPL_TEXT_BASE
	default 0xfff81000

config TPL_MAX_SIZE
	default 10240

config TPL_STACK
	default 0xfff84000

endif

config ROCKCHIP_RK3328
	bool "Support Rockchip RK3328"
	select ARM64
	select GICV2
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select TPL
	select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	imply SPL_SERIAL_SUPPORT
	imply TPL_SERIAL_SUPPORT
	imply SPL_SEPARATE_BSS
	select ARM_SMCCC
	help
	  The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53.
	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
	  video interfaces supporting HDMI and eDP, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.

if ROCKCHIP_RK3328

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"

config TPL_TEXT_BASE
        default 0xff091000

config TPL_MAX_SIZE
        default 28672

config TPL_STACK
        default 0xff098000

endif

config ROCKCHIP_RK3368
	bool "Support Rockchip RK3368"
	select ARM64
	select SUPPORT_SPL
	select SUPPORT_TPL
	select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	imply SPL_SEPARATE_BSS
	imply SPL_SERIAL_SUPPORT
	imply TPL_SERIAL_SUPPORT
	select GICV2
	select ARM_SMCCC
	help
	  The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised
	  into a big and little cluster with 4 cores each) Cortex-A53 including
	  AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache
	  (for the little cluster), PowerVR G6110 based graphics, one video
	  output processor supporting LVDS/HDMI/eDP, several DDR3 options and
	  video codec support.

	  On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO,
	  I2S, UARTs, SPI, I2C and PWMs.

if ROCKCHIP_RK3368

config ROCKCHIP_PX5
	bool "Support Rockchip PX5"
	help
	  PX5 is a variant of RK3368, it shares codes with RK3368, but we still
	  need this macro to distinguish PX5 and RK3368.

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds"

config TPL_TEXT_BASE
        default 0xff8c1000

config TPL_MAX_SIZE
        default 28672

config TPL_STACK
        default 0xff8cffff

endif

config ROCKCHIP_RK3399
	bool "Support Rockchip RK3399"
	select ARM64
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select TPL
	select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	imply TPL_SERIAL_SUPPORT
	select SPL_SEPARATE_BSS
	select SPL_SERIAL_SUPPORT
	select SPL_DRIVERS_MISC_SUPPORT
	select GICV3
	select BOARD_LATE_INIT
	select ROCKCHIP_BROM_HELPER
	select ARM_SMCCC
	select TPL_LIBCOMMON_SUPPORT
	select TPL_LIBGENERIC_SUPPORT
	select TPL_SYS_MALLOC_SIMPLE
	select TPL_BOOTROM_SUPPORT
	select TPL_DRIVERS_MISC_SUPPORT
	select TPL_OF_CONTROL
	select TPL_DM
	select TPL_REGMAP
	select TPL_SYSCON
	select TPL_RAM
	select TPL_CLK
	select TPL_TINY_MEMSET
	help
	  The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72
	  and quad-core Cortex-A53.
	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
	  video interfaces supporting HDMI and eDP, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.

if ROCKCHIP_RK3399

config ROCKCHIP_RK3399PRO
	bool "Support Rockchip RK3399Pro"

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"

config TPL_TEXT_BASE
        default 0xff8c2000

config TPL_MAX_SIZE
        default 188416

config TPL_STACK
        default 0xff8effff

endif

config ROCKCHIP_RK3528
	bool "Support Rockchip RK3528"
	select ARM64 if !ARM64_BOOT_AARCH32
	select GICV2 if !ARM64_BOOT_AARCH32
	select SUPPORT_TPL if !ARM64_BOOT_AARCH32
	select SUPPORT_SPL if !ARM64_BOOT_AARCH32
	select TPL_TINY_FRAMEWORK if TPL
	select DEBUG_UART_BOARD_INIT
	imply TPL if !ARM64_BOOT_AARCH32
	imply SPL if !ARM64_BOOT_AARCH32
	imply TPL_SERIAL_SUPPORT
	help
	  The Rockchip RK3528 is a ARM-based SoC with a quad-core Cortex-A53.

if ROCKCHIP_RK3528

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"

config TPL_TEXT_BASE
	default 0xfe481000

config TPL_MAX_SIZE
	default 61440

endif

config ROCKCHIP_RK3562
	bool "Support Rockchip RK3562"
	select GICV2
	select ARM64
	select ARM_SMCCC
	select SUPPORT_TPL
	select SUPPORT_SPL
	select TPL_TINY_FRAMEWORK if TPL
	select DEBUG_UART_BOARD_INIT
	imply TPL
	imply SPL
	imply TPL_SERIAL_SUPPORT
	help
	  The Rockchip RK3562 is a ARM-based SoC with a quad-core Cortex-A53.

if ROCKCHIP_RK3562

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"

config TPL_TEXT_BASE
	default 0xfe481000

config TPL_MAX_SIZE
	default 61440

endif

config ROCKCHIP_RK3568
	bool "Support Rockchip RK3568"
	select ARM64 if !ARM64_BOOT_AARCH32
	select ARM_SMCCC
	select GICV3 if !ARM64_BOOT_AARCH32 && !SUPPORT_USBPLUG
	select SUPPORT_TPL if !ARM64_BOOT_AARCH32
	select SUPPORT_SPL if !ARM64_BOOT_AARCH32
	select TPL_TINY_FRAMEWORK if TPL
	select DEBUG_UART_BOARD_INIT
	imply TPL if !ARM64_BOOT_AARCH32
	imply SPL if !ARM64_BOOT_AARCH32
	imply TPL_SERIAL_SUPPORT
	help
	  The Rockchip RK3568 is a ARM-based SoC with a quad-core Cortex-A55.

if ROCKCHIP_RK3568

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"

config TPL_TEXT_BASE
	default 0xfdcc1000

config TPL_MAX_SIZE
	default 61440

endif

config ROCKCHIP_RK3588
	bool "Support Rockchip RK3588"
	select ARM64 if !ARM64_BOOT_AARCH32
	select ARM_SMCCC
	select DEBUG_UART_BOARD_INIT
	select GICV3 if !ARM64_BOOT_AARCH32 && !SUPPORT_USBPLUG
	select ROCKCHIP_BROM_HELPER
	select SUPPORT_SPL if !ARM64_BOOT_AARCH32
	select SUPPORT_TPL if !ARM64_BOOT_AARCH32
	select TPL_TINY_FRAMEWORK if TPL
	imply TPL if !ARM64_BOOT_AARCH32
	imply SPL if !ARM64_BOOT_AARCH32
	imply TPL_SERIAL_SUPPORT
	select DEBUG_UART_BOARD_INIT
	help
	  The Rockchip RK3588 is a ARM-based SoC with a quad-core Cortex-A55.

if ROCKCHIP_RK3588

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"

config TPL_TEXT_BASE
	default 0xfdcc1000

config TPL_MAX_SIZE
	default 61440
endif

config ROCKCHIP_RK1808
	bool "Support Rockchip RK1808"
	select ARM64
	select ARM_SMCCC
	select GICV3 if !COPROCESSOR_RK1808
	select SUPPORT_SPL if !COPROCESSOR_RK1808
	select SUPPORT_TPL if !COPROCESSOR_RK1808
	help
	  The Rockchip RK1808 is a ARM-based Soc which embedded with dual
	  Cortex-A35.

if ROCKCHIP_RK1808

config ROCKCHIP_RK1806
	bool "Support Rockchip RK1806"
	help
	  The Rockchip RK1806 is a ARM-based Soc which embedded with dual
	  Cortex-A35.

config COPROCESSOR_RK1808
	bool "RK1808 coprocessor"
	help
	  This indicates the RK1808 is working as a coprocessor for another
	  more powerful SoC.

endif

config ROCKCHIP_RV1106
	bool "Support Rockchip RV1106"
	select CPU_V7
	select DEBUG_UART_BOARD_INIT
	imply SUPPORT_SPL
	imply SUPPORT_TPL
	imply SPL
	imply TPL
	imply TPL_SERIAL_SUPPORT
	imply TPL_TINY_FRAMEWORK if TPL
	imply BOARD_LATE_INIT
	imply ROCKCHIP_GPIO_V2
	help
	  The Rockchip RV1106 is a ARM-based SoC with a Cortex-A7 and
	  other modules.

if ROCKCHIP_RV1106

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl.lds"

config TPL_TEXT_BASE
	default 0xff701000

config TPL_MAX_SIZE
	default 32768
endif

config ROCKCHIP_RV1108
	bool "Support Rockchip RV1108"
	select CPU_V7
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select TPL
	select BOARD_LATE_INIT
	help
	  The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7
	  and a DSP.

if ROCKCHIP_RV1108

config TPL_LDSCRIPT
        default "arch/arm/mach-rockchip/u-boot-tpl.lds"

config TPL_TEXT_BASE
        default 0x10080800

config TPL_MAX_SIZE
        default 6144

config TPL_STACK
        default 0x10082000

endif

config ROCKCHIP_RV1126
	bool "Support Rockchip RV1126"
	select CPU_V7
	imply SUPPORT_TPL
	imply SUPPORT_SPL
	imply TPL_TINY_FRAMEWORK if TPL
	select DEBUG_UART_BOARD_INIT
	imply TPL
	imply SPL
	imply GICV2
	imply ARM_SMCCC
	imply BOARD_LATE_INIT
	imply ROCKCHIP_GPIO_V2
	imply TPL_SERIAL_SUPPORT
	help
	  The Rockchip RV1126 is a ARM-based SoC with a quad-core Cortex-A7
	  and a risc-v core.

if ROCKCHIP_RV1126

config TPL_LDSCRIPT
	default "arch/arm/mach-rockchip/u-boot-tpl.lds"

config TPL_TEXT_BASE
	default 0xff701000

config TPL_MAX_SIZE
	default 32768
endif

config SPL_ROCKCHIP_BACK_TO_BROM
	bool "SPL returns to bootrom"
	default y if ROCKCHIP_RK3036
	select ROCKCHIP_BROM_HELPER
	depends on SPL
	help
	  Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled,
          SPL will return to the boot rom, which will then load the U-Boot
          binary to keep going on.

config TPL_ROCKCHIP_BACK_TO_BROM
	bool "TPL returns to bootrom"
	default y
	select ROCKCHIP_BROM_HELPER
	depends on TPL
	help
	  Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled,
          SPL will return to the boot rom, which will then load the U-Boot
          binary to keep going on.

config ARM64_BOOT_AARCH32
	bool "Support Boot an ARM64 on AArch32 execution state, ie. U-Boot is in AArch32"
	select CPU_V7
	default n
	help
	  If you want to boot an ARM64 processor on 32-bit mode, say y here.

config ARM64_SWITCH_TO_AARCH32
	bool "Support AArch64 U-Boot boot AArch32 kernel"
	default n
	help
	  If you want AArch64 U-Boot to boot AArch32 kernel, say y here.
	  This feature needs ATF to help switch the PE state.

config ROCKCHIP_BOOT_MODE_REG
	hex "Rockchip boot mode flag register address"
	default 0xff010200 if ROCKCHIP_PX30
	default 0x200081c8 if ROCKCHIP_RK3036
	default 0x100a0038 if ROCKCHIP_RK3128
	default 0x20004040 if ROCKCHIP_RK3188
	default 0x110005c8 if ROCKCHIP_RK322X
	default 0xff730094 if ROCKCHIP_RK3288
	default 0xff000500 if ROCKCHIP_RK3308
	default 0xff1005c8 if ROCKCHIP_RK3328
	default 0xff738200 if ROCKCHIP_RK3368
	default 0xff320300 if ROCKCHIP_RK3399
	default 0xff370200 if ROCKCHIP_RK3528
	default 0xff010220 if ROCKCHIP_RK3562
	default 0xfdc20200 if ROCKCHIP_RK3568
	default 0xfd588080 if ROCKCHIP_RK3588
	default 0xfe020200 if ROCKCHIP_RK1808
	default 0xff020200 if ROCKCHIP_RV1106
	default 0x10300580 if ROCKCHIP_RV1108
	default 0xfe020200 if ROCKCHIP_RV1126
	default 0
	help
	  The Soc will enter to different boot mode(defined in asm/arch/boot_mode.h)
	  according to the value from this register.

config ROCKCHIP_STIMER_BASE
	hex "Rockchip Secure timer base address"
	default 0xff220020 if ROCKCHIP_PX30
	default 0x200440a0 if ROCKCHIP_RK3036
	default 0x2000e000 if ROCKCHIP_RK3066
	default 0x20018020 if ROCKCHIP_RK3126
	default 0x200440a0 if ROCKCHIP_RK3128
	default 0x2000e000 if ROCKCHIP_RK3188
	default 0x110d0020 if ROCKCHIP_RK322X
	default 0xff810020 if ROCKCHIP_RK3288
	default 0xff1b00a0 if ROCKCHIP_RK3308
	default 0xff1d0020 if ROCKCHIP_RK3328
	default 0xff830020 if ROCKCHIP_RK3368
	default 0xff8680a0 if ROCKCHIP_RK3399
	default 0xff620000 if ROCKCHIP_RK3528
	default 0xffa90020 if ROCKCHIP_RK3562
	default 0xfdd1c020 if ROCKCHIP_RK3568
	default 0xfd8c8000 if ROCKCHIP_RK3588
	default 0xff590020 if ROCKCHIP_RV1106
	default 0x10350020 if ROCKCHIP_RV1108
	default 0xff670020 if ROCKCHIP_RV1126
	default 0
	help
	  The secure timer inited in SPL/TPL in secure word, ARM generic timer
	  works after this timer work.

config ROCKCHIP_IRAM_START_ADDR
	hex "Rockchip Secure timer base address"
	default 0xff0e0000 if ROCKCHIP_PX30
	default 0x10080000 if ROCKCHIP_RK3036
	default 0x10080000 if ROCKCHIP_RK3128
	default 0x10080000 if ROCKCHIP_RK3188
	default 0x10080000 if ROCKCHIP_RK322X
	default 0xff700000 if ROCKCHIP_RK3288
	default 0xfff80000 if ROCKCHIP_RK3308
	default 0xff091000 if ROCKCHIP_RK3328
	default 0xff8c0000 if ROCKCHIP_RK3368
	default 0xff8c0000 if ROCKCHIP_RK3399
	default 0xfe480000 if ROCKCHIP_RK3528
	default 0xfe480000 if ROCKCHIP_RK3562
	default 0xfdcc0000 if ROCKCHIP_RK3568
	default 0xff000000 if ROCKCHIP_RK3588
	default 0xff6c0000 if ROCKCHIP_RV1106
	default 0x10080000 if ROCKCHIP_RV1108
	default 0xff700000 if ROCKCHIP_RV1126
	default 0
	help
	  The IRAM start addr is to locate variant of the boot device from
	  bootrom.

config ROCKCHIP_SPL_RESERVE_IRAM
	hex "Size of IRAM reserved in SPL"
	default 0
	help
	  SPL may need reserve memory for firmware loaded by SPL, whose load
	  address is in IRAM and may overlay with SPL text area if not
	  reserved.

config ROCKCHIP_BROM_HELPER
	bool

config SPL_ROCKCHIP_EARLYRETURN_TO_BROM
        bool "SPL requires early-return (for RK3188-style BROM) to BROM"
	depends on SPL && ENABLE_ARM_SOC_BOOT0_HOOK
	help
	  Some Rockchip BROM variants (e.g. on the RK3188) load the
	  first stage in segments and enter multiple times. E.g. on
	  the RK3188, the first 1KB of the first stage are loaded
	  first and entered; after returning to the BROM, the
	  remainder of the first stage is loaded, but the BROM
	  re-enters at the same address/to the same code as previously.

	  This enables support code in the BOOT0 hook for the SPL stage
	  to allow multiple entries.

config TPL_ROCKCHIP_EARLYRETURN_TO_BROM
        bool "TPL requires early-return (for RK3188-style BROM) to BROM"
	depends on TPL && ENABLE_ARM_SOC_BOOT0_HOOK
	help
	  Some Rockchip BROM variants (e.g. on the RK3188) load the
	  first stage in segments and enter multiple times. E.g. on
	  the RK3188, the first 1KB of the first stage are loaded
	  first and entered; after returning to the BROM, the
	  remainder of the first stage is loaded, but the BROM
	  re-enters at the same address/to the same code as previously.

	  This enables support code in the BOOT0 hook for the TPL stage
	  to allow multiple entries.

config SPL_MMC_SUPPORT
	default y if !SPL_ROCKCHIP_BACK_TO_BROM && MMC

config RKIMG_BOOTLOADER
	bool "Support for Rockchip platform features"
	default y
	help
	  Actually this is a compatible configure for code compilation.

config RKIMG_ANDROID_BOOTMODE_LEGACY
	bool "Support set androidboot.mode with legacy rule"
	depends on RKIMG_BOOTLOADER
	default n
	help
	  Rockchip set "androidboot.mode=" as "charger" or boot media for android,
	  which is a rockchip private solution(SDK < 8.1) and deprecated.

config ROCKCHIP_BOOTDEV
	string "Set the boot device for multiple storage board"
	default ""
	help
	  On the multiple storage on board, set this to determine what we really
	  want to be the boot device, which contains kernel, rootfs and etc.
	  Fall through to get from preloader or scan list when it's NULL.

config ROCKCHIP_RESOURCE_IMAGE
	bool "Enable support for rockchip resource image"
	depends on RKIMG_BOOTLOADER
	default y
	help
	  This enables support to get dtb or logo files from
	  rockchip resource image format partition.

config ROCKCHIP_DTB_VERIFY
	bool "Enable hash verify for DTB in the resource file"
	depends on ROCKCHIP_RESOURCE_IMAGE
	select SHA1 if !DM_CRYPTO
	select SHA256 if !DM_CRYPTO
	default y
	help
	  This enables the hash verify for DTB in the resource file, it means we
	  always read DTB from second position even the DTB position is present.

config ROCKCHIP_USB_BOOT
	bool "Enable support for rockchip U-disk boot"
	depends on USB
	default n
	help
	  This enables support for rockchip U-disk boot.

config ROCKCHIP_FIT_IMAGE
	bool "Enable support for FIT image"
	depends on FIT
	select CMD_BOOT_FIT
	default n
	help
	  This enables loading dtb from fit image.

config ROCKCHIP_UIMAGE
	bool "Enable support for legacy uImage"
	depends on !FIT_SIGNATURE && USING_KERNEL_DTB
	select CMD_BOOT_UIMAGE
	default n
	help
	  This enables loading dtb from uImage image.

config ROCKCHIP_EARLY_DISTRO_DTB
	bool "Enable support for distro dtb early"
	depends on DISTRO_DEFAULTS && USING_KERNEL_DTB && CMD_FS_GENERIC
	default n
	help
	  This enables loading dtb from distro bootable partition when there
	  is no valid dtb in android boot.img and rockchip resource.img.

if ROCKCHIP_EARLY_DISTRO_DTB

config ROCKCHIP_EARLY_DISTRO_DTB_PATH
	string "/rk-kernel.dtb"
	help
	  "DTB file path in the bootable partition image"
endif

config ROCKCHIP_HWID_DTB
	bool "Enable support for selecting DTB by hardware id"
	depends on ROCKCHIP_RESOURCE_IMAGE
	default n
	help
	  This enables select the expected DTB from sets by hardware id,
	  i.e. GPIO or ADC value.

config ROCKCHIP_VENDOR_PARTITION
	bool "Rockchip vendor storage partition support"
	depends on RKIMG_BOOTLOADER
	help
	  This enable support to read/write vendor configuration data from/to
	  this partition.

config USING_KERNEL_DTB
	bool "Using dtb from Kernel/resource for U-Boot"
	depends on RKIMG_BOOTLOADER && OF_LIVE
	default y
	help
	  This enable support to read dtb from resource and use it for U-Boot,
	  the uart and emmc will still using U-Boot dtb, but other devices like
	  regulator/pmic, display, usb will use dts node from kernel.

config USING_KERNEL_DTB_V2
	bool "Version 2 of kernel dtb mechanism"
	depends on USING_KERNEL_DTB
	default n
	help
	  The V2 mechanism:
	    - both of U-Boot and kernel's *ALL* devices are exist in dm tree.
	    - put the necessary U-Boot devices in the head of device uclass list.
	    - the both existence policy don't require phandle fixup any more.
	    - it is for the next generation(rk3588 ...) or necessary platforms.
	  The V1 mechanism(legacy):
	    - U-Boot: only some necessary U-Boot devices(storage, crypto...) in dm tree.
	    - kernel: all the devices(except the U-Boot only) in dm tree.

config EMBED_KERNEL_DTB
	bool "Enable embedded dtb support"
	default n
	help
	  Enable embedded dtb support.

config EMBED_KERNEL_DTB_PATH
	string "Embedded kernel dtb file path"
	depends on EMBED_KERNEL_DTB && USING_KERNEL_DTB
	default "dts/kern.dtb"
	help
	  This file will auto be appended to the u-boot.bin.

config EMBED_KERNEL_DTB_ALWAYS
	bool "Always using embedded kernel dtb"
	depends on EMBED_KERNEL_DTB && USING_KERNEL_DTB
	default n
	help
	  Allow fallback to always use a prepared kernel dtb even USING_KERNEL_DTB
	  is set. This makes U-Boot stage more stable but not flexible any more to
	  compatible different boards.

config ROCKCHIP_CRC
	bool "Rockchip CRC verify images"
	help
	  This enable support Rockchip CRC verify images. It takes a lot of time,
	  so it is better only used for debug.

config ROCKCHIP_SMCCC
	bool "Rockchip SMCCC"
	default y if ARM_SMCCC
	help
	  This enable support for Rockchip SMC calls

config ROCKCHIP_DEBUGGER
	bool "Rockchip debugger"
	depends on IRQ
	help
	  This enable support for Rockchip debugger. Now we install a timer interrupt
	  and dump pt_regs when the timeout event trigger. This helps us to know cpu
	  state when system hang.

config ROCKCHIP_CRASH_DUMP
	bool "Rockchip crash dump registers"
	help
	  This enable dump registers when system crash, the registers you would like
	  to dump can be added in show_regs().

config ROCKCHIP_PRELOADER_ATAGS
	bool "Rockchip pre-loader atags"
	default y if ARCH_ROCKCHIP
	help
	  This enable support Rockchip atags among pre-loaders, i.e. ddr, miniloader, ATF,
	  tos, U-Boot, etc. It delivers boot and configure information, shared with pre-loaders
	  and finally ends with U-Boot.

config ROCKCHIP_META
	bool "Rockchip Meta"
	depends on SPL_KERNEL_BOOT && SPL_LIBDISK_SUPPORT
	help
	  This support to load Rockchip meta data which like isp parameter, peripheral
	  parameters, etc.

config ROCKCHIP_PRELOADER_SERIAL
	bool "Rockchip pre-loader serial"
	default y if ROCKCHIP_PRELOADER_ATAGS
	help
	  This enable U-Boot using pre-loader atags serial configure to initialize console.
	  It denpends on serial aliases to find pre-loader serial number.

config ROCKCHIP_IMAGE_TINY
	bool "Rockchip tiny Image generation"
	default n
	help
	  This enable tiny image generation

config ROCKCHIP_FIT_IMAGE_PACK
	bool "Rockchip fit image pack of U-Boot and TEE"
	depends on ROCKCHIP_FIT_IMAGE
	default n
	help
	  This enable fit image pack of U-Boot and TEE, it's used for make.sh script.

config ROCKCHIP_UART_MUX_SEL_M
	int "UART mux select"
	default 0
	depends on TPL
	help
	  This select uart multiplexer for debug uart iomux in board_debug_uart_init.

config ROCKCHIP_REBOOT_TEST
	bool "Rockchip reboot stress test before kernel"
	default n
	help
	  It's a reboot stress test before kernel stages.

config ROCKCHIP_NEW_IDB
	bool "Rockchip new IDB header"
	default n
	help
	  The new IDB header was introduced from RK356X.

config ROCKCHIP_HOTKEY
	bool "Rockchip hotkey"
	default y
	help
	  Define a lot of hotkeys for debug.

config ROCKCHIP_CMD
	string "Rockchip specific command"
	default ""
	help
	  It defines a command to be run when the key is pressed if assigned.
	  String format: "cmd key".
	  @cmd: any U-Boot cmd.
	  @key: any key map id, '-' standard for ignore.
	  e.g. "sd_update 115", 115 is KEY_VOLUMEUP.

config GICV2
	bool "ARM GICv2"

config GICV3
	bool "ARM GICv3"

config ROCKCHIP_EMMC_IOMUX
	bool "ROCKCHIP EMMC IOMUX"
	default n
	help
	  This enable U-Boot to config EMMC iomux.

config ROCKCHIP_NAND_IOMUX
	bool "ROCKCHIP NAND IOMUX"
	default n
	help
	  This enable U-Boot to config NAND iomux.

config ROCKCHIP_SFC_IOMUX
	bool "ROCKCHIP SFC IOMUX"
	default n
	help
	  This enable U-Boot to config SFC iomux.

config ROCKCHIP_SET_SN
	bool "Rockchip set serial number"
	default y

config ROCKCHIP_SET_ETHADDR
	bool "Rockchip set eth address"
	default y

config BASE_DEFCONFIG
	string "Base defconfig of config fragment"
	default ""
	help
	  Indicate the base defconfig of config fragment.

config CHIP_NAME
	string "Chip label name"
	default ""

config LOADER_INI
	string "Name of Loader ini file in rkbin repository"
	default ""
	help
	  The ini file is used to pack loader image.

config TRUST_INI
	string "Name of Trust ini file in rkbin repository"
	default ""
	help
	  The ini file is used to pack trust image.

if !ROCKCHIP_FIT_IMAGE_PACK
config UBOOT_SIZE_KB
	int "Per u-boot.bin Image size, unit: KB"
	default 1024

config UBOOT_NUM
	int "Number of u-boot.bin image being packed into trust.img"
	default 4

config TRUST_SIZE_KB
	int "Per trust Image size, unit: KB"
	default 2048

config TRUST_NUM
	int "Number of trust image being packed into trust.img"
	default 2

config TRUST_RSA_MODE
	int "RSA mode of trust.img on ARM64"
	default 2
	help
	  The RSA mode for tools to pack, the mode id can be:
	  0: none; 1: RSA-1024; 2: RSA-2048; 3: RSA-2048-pss.

config TRUST_SHA_MODE
	int "SHA mode of trust.img on ARM64"
	default 3
	help
	  The SHA mode for tools to pack, the mode id can be:
	  0: none; 1: sha1; 2: sha256 RK big endian; 3: sha256 little endian.
endif

config PSTORE
	bool "Print log to linux pstore buffer"
	default n
	help
	  This enable Print uboot log to linux pstore buffer which address
	  is default 0x110000 for most soc.

config PERSISTENT_RAM_ADDR
	hex "Linux pstore buffer address"
	default 0x0
	depends on PSTORE
	help
	  This select linux pstore buffer address for U-Boot. When value is
	  0, U-Boot auto gets this address from preloader atags.

config PERSISTENT_RAM_SIZE
	hex "Linux pstore buffer size"
	default 0x0
	depends on (PERSISTENT_RAM_ADDR != 0)
	help
	  This select linux pstore buffer size for U-Boot, the value must be
	  set if PERSISTENT_RAM_ADDR != 0.

source "arch/arm/mach-rockchip/px30/Kconfig"
source "arch/arm/mach-rockchip/rk3036/Kconfig"
source "arch/arm/mach-rockchip/rk3066/Kconfig"
source "arch/arm/mach-rockchip/rk3128/Kconfig"
source "arch/arm/mach-rockchip/rk3188/Kconfig"
source "arch/arm/mach-rockchip/rk322x/Kconfig"
source "arch/arm/mach-rockchip/rk3288/Kconfig"
source "arch/arm/mach-rockchip/rk3308/Kconfig"
source "arch/arm/mach-rockchip/rk3328/Kconfig"
source "arch/arm/mach-rockchip/rk3368/Kconfig"
source "arch/arm/mach-rockchip/rk3399/Kconfig"
source "arch/arm/mach-rockchip/rk3528/Kconfig"
source "arch/arm/mach-rockchip/rk3562/Kconfig"
source "arch/arm/mach-rockchip/rk3568/Kconfig"
source "arch/arm/mach-rockchip/rk3588/Kconfig"
source "arch/arm/mach-rockchip/rk1808/Kconfig"
source "arch/arm/mach-rockchip/rv1106/Kconfig"
source "arch/arm/mach-rockchip/rv1108/Kconfig"
source "arch/arm/mach-rockchip/rv1126/Kconfig"

endif