xref: /OK3568_Linux_fs/rkbin/doc/release/RK3528_EN.md (revision 4882a59341e53eb6f0b4789bf948001014eff981)
1# RK3528 Release Note
2
3## rk3528_bl31_v1.15.elf
4
5| Date       | File                  | Build commit | Severity  |
6| ---------- | :-------------------- | ------------ | --------- |
7| 2023-07-17 | rk3528_bl31_v1.15.elf | d8ae91904    | important |
8
9### New
10
111. Add support for rk3528A.
12
13------
14
15## rk3528_ddr_1056MHz_{2L_PCB,4BIT_PCB_}v1.06.bin
16
17| Date       | File                                           | Build commit | Severity  |
18| ---------- | ---------------------------------------------- | ------------ | --------- |
19| 2023-06-05 | rk3528_ddr_1056MHz_{2L_PCB,4BIT_PCB_}v1.06.bin | 1ab0bfbe2d   | important |
20
21### New
22
231. Support modified CA de-skew by ddrbin_tool.
24
25------
26
27## rk3528_bl31_v1.14.elf
28
29| Date       | File                  | Build commit | Severity  |
30| ---------- | :-------------------- | ------------ | --------- |
31| 2023-05-19 | rk3528_bl31_v1.14.elf | 1b2124ab7    | important |
32
33### New
34
351. Move  BL31 base to 0x80000.
362. Support ddr frequency scale.
37
38------
39
40## rk3528_ddr_1056MHz_{2L_PCB,4BIT_PCB_}v1.05.bin
41
42| Date       | File                                           | Build commit | Severity  |
43| ---------- | ---------------------------------------------- | ------------ | --------- |
44| 2023-04-14 | rk3528_ddr_1056MHz_{2L_PCB,4BIT_PCB_}v1.05.bin | 2eef4a672d   | important |
45
46### New
47
481. Add new ddrbin  for 4BIT PCB configurations.
492. Add the configuration of LP3 CA skew.
50
51### Fixed
52
53| Index | Severity  | Update                                                       | Issue description                                            | Issue source |
54| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ |
55| 1     | important | Fix the phase problem of DDR3 RAS in 2T mode.                | Abnormal RAS phase in DDR3 2T mode.                          | -            |
56| 2     | important | Fixed the abnormal ODT output problem in LP3 training under multi-rank. | The ODT output is abnormal when LP3 does cs1 write training under multi-rank. | -            |
57
58------
59
60## rk3528_bl32_v1.02.bin
61
62| Date       | File                  | Build commit | Severity  |
63| ---------- | :-------------------- | ------------ | --------- |
64| 2023-04-12 | rk3528_bl32_v1.02.bin | c73fd5531    | important |
65
66### New
67
681. Added crypto/trng/keylad module support.
69
70------
71
72## rk3528_bl31_v1.13.elf
73
74| Date       | File                  | Build commit | Severity  |
75| ---------- | :-------------------- | ------------ | --------- |
76| 2023-04-12 | rk3528_bl31_v1.13.elf | 642369d9b    | important |
77
78### New
79
801. Modify pvtpll table for cpu and gpu.
81
82------
83
84## rk3528_spl_v1.04.bin
85
86| Date       | File                 | Build commit | Severity  |
87| ---------- | :----------------- - | ------------ | --------- |
88| 2023-04-11 | rk3528_spl_v1.04.bin | 0fbedd06     | important |
89
90### Fixed
91
92| Index | Severity  | Update                             | Issue description   | Issue source |
93| ----- | --------- | ---------------------------------- | ------------------- | ------------ |
94| 1     | important | Fix matrix 339M freq set/get error | EMMC transfer error | -            |
95
96------
97
98## rk3528_usbplug_v1.03.bin
99
100| Date       | File                  | Build commit | Severity  |
101| ---------- | :----------------------- | ---------- | -------- |
102| 2023-04-08 | rk3528_usbplug_v1.03.bin | dbdfea79b  | important |
103
104### Fixed
105
106| Index | Severity  | Update                 | Issue description                  | Issue source |
107| ----- | --------- | ---------------------- | ------------------------ | ------------ |
108| 1     | important | Fix sometime emmc upgrade fail.        | Emmc upgrade fail sometime.     | -            |
109
110------
111
112## rk3528_bl32_v1.01.bin
113
114| Date       | File                  | Build commit | Severity |
115| ---------- | :-------------------- | ------------ | -------- |
116| 2023-04-03 | rk3528_bl32_v1.01.bin | c5251becc    | moderate |
117
118### New
119
1201. Add some internal TA interface.
121
122------
123
124## rk3528_bl31_v1.12.elf
125
126| Date       | File                  | Build commit | Severity  |
127| ---------- | :-------------------- | ------------ | --------- |
128| 2023-03-16 | rk3528_bl31_v1.12.elf | 70c5c8d9c    | important |
129
130### New
131
1321. Improve trng performance.
133
134------
135
136## rk3528_ddr_1056MHz_{2L_PCB_}v1.04.bin
137
138| Date       | File                                  | Build commit | Severity  |
139| ---------- | ------------------------------------- | ------------ | --------- |
140| 2023-03-15 | rk3528_ddr_1056MHz_{2L_PCB_}v1.04.bin | dce46ffe73   | important |
141
142### New
143
1441. Add new OTP configurations support.
145
146------
147
148## rk3528_bl31_v1.11.elf
149
150| Date       | File                  | Build commit | Severity  |
151| ---------- | :-------------------- | ------------ | --------- |
152| 2023-03-09 | rk3528_bl31_v1.11.elf | 389e6e47     | important |
153
154### New
155
1561. Modify the ddr configuration flow during system suspend.
157
158------
159
160## rk3528_ddr_1056MHz_{2L_PCB_}v1.03.bin
161
162| Date       | File                                  | Build commit | Severity  |
163| ---------- | ------------------------------------- | ------------ | --------- |
164| 2023-03-09 | rk3528_ddr_1056MHz_{2L_PCB_}v1.03.bin | f0be8490c4   | important |
165
166### New
167
1681. Add support for chips with different OTP configurations.
169
170### Fixed
171
172| Index | Severity  | Update                                                | Issue description                                            | Issue source |
173| ----- | --------- | ----------------------------------------------------- | ------------------------------------------------------------ | ------------ |
174| 1     | important | Fixed LP3 x16 capacity error problem.                 | The ddr capacity anomalies occur when the phy at lp3 x16 mode. | -            |
175| 2     | important | Fixed DDR unstabled when in low frequency(<=400Mhz) . | The kernel will panic when DDR run in low frequency(<=400Mhz). | -            |
176
177------
178
179## rk3528_ddr_1056MHz_{2L_PCB_}v1.02.bin
180
181| Date       | File                                  | Build commit | Severity  |
182| ---------- | ------------------------------------- | ------------ | --------- |
183| 2023-02-15 | rk3528_ddr_1056MHz_{2L_PCB_}v1.02.bin | 60403d388d   | important |
184
185### New
186
1871. Support config derate refresh, per-bank refresh.
1882. Support AXI split.
1893. Enable LP4, LP4X read/write DBI function.
190
191### Fixed
192
193| Index | Severity  | Update                                             | Issue description                              | Issue source |
194| ----- | --------- | -------------------------------------------------- | ---------------------------------------------- | ------------ |
195| 1     | important | Fixed 2L PCB unstabled when DDR in high frequency. | The DDR run in 1056MHz will case system panic. | -            |
196
197------
198
199## rk3528_bl31_v1.10.elf
200
201| Date       | File                  | Build commit | Severity  |
202| ---------- | :-------------------- | ------------ | --------- |
203| 2023-02-15 | rk3528_bl31_v1.10.elf | d74b03e10    | important |
204
205### New
206
2071. Add trng scmi clk support.
208
209------
210
211## rk3528_bl31_v1.09.elf
212
213| Date       | File                  | Build commit | Severity  |
214| ---------- | :-------------------- | ------------ | --------- |
215| 2023-02-03 | rk3528_bl31_v1.09.elf | 16574c7f3    | important |
216
217### New
218
2191. Support all gpio wakeup.
2202. Improve the stability of fiq-debugger.
221
222------
223
224## rk3528_bl31_v1.08.elf
225
226| Date       | File                  | Build commit | Severity  |
227| ---------- | :-------------------- | ------------ | --------- |
228| 2023-01-10 | rk3528_bl31_v1.08.elf | 082486b74    | important |
229
230### New
231
2321. Support crypto/crypto_s/klad clock.
233
234------
235
236## rk3528_bl31_v1.07.elf
237
238| Date       | File                  | Build commit | Severity  |
239| ---------- | :-------------------- | ------------ | --------- |
240| 2022-12-26 | rk3528_bl31_v1.07.elf | da191fda0    | important |
241
242### New
243
2441. Support poweroff VDD_LOGIC when system suspend.
2452. Hptimer use soft adjust mode.
2463. Enable PLAT_RK_OPTEED_SYS_CTRL.
247
248------
249
250## rk3528_spl_v1.03.bin
251
252| Date       | File                 | Build commit | Severity |
253| ---------- | :------------------- | ----------- | -------- |
254| 2022-12-14 | rk3528_spl_v1.03.bin | f09ed5ff4f  | important|
255
256### Fixed
257
258| Index | Severity  | Update                 | Issue description                  | Issue source |
259| ----- | --------- | ---------------------- | ---------------------------------- | ------------ |
260| 1     | important | Support HS400ES        | fix HS400 compatibility issues     | -            |
261| 2     | important | config EMMC DS to 1.5X | fix some EMMC compatibility issues | -            |
262
263------
264
265## rk3528_bl31_v1.06.elf
266
267| Date       | File                  | Build commit | Severity  |
268| ---------- | :-------------------- | ------------ | --------- |
269| 2022-12-08 | rk3528_bl31_v1.06.elf | 61102ec13    | important |
270
271### New
272
2731. Support USB wakeup.
274
275------
276
277## rk3528_spl_v1.02.bin
278
279| Date       | File                 | Build commit | Severity  |
280| ---------- | :------------------- | ------------ | --------- |
281| 2022-12-02 | rk3528_spl_v1.02.bin | eee09e1f72   | important |
282
283### Fixed
284
285| Index | Severity  | Update                    | Issue description                                            | Issue source |
286| ----- | --------- | ------------------------- | ------------------------------------------------------------ | ------------ |
287| 1     | important | Fix matrix clk rate error | clk_200m:396000 KHz、clk_300m:594000 KHz、clk_339m:264000 KHz. It may influence storage module. | -            |
288
289------
290
291## rk3528_bl31_v1.05.elf
292
293| Date       | File                  | Build commit | Severity |
294| ---------- | :-------------------- | ------------ | -------- |
295| 2022-12-01 | rk3528_bl31_v1.05.elf | b10341386    | moderate |
296
297### New
298
2991. Add TSP clock support.
300
301------
302
303## rk3528_bl31_v1.04.elf
304
305| Date       | File                  | Build commit | Severity  |
306| ---------- | :-------------------- | ------------ | --------- |
307| 2022-11-30 | rk3528_bl31_v1.04.elf | 63ba7e8e1    | important |
308
309### New
310
3111. Support HDMI wakeup.
312
313------
314
315## rk3528_{ddr,spl,usbplug}_v1.x.bin
316
317| Date       | File                              | Build commit                                | Severity  |
318| ---------- | :-------------------------------- | ------------------------------------------- | --------- |
319| 2022-11-28 | rk3528_{ddr,spl,usbplug}_v1.x.bin | ddr:0799b9b10a#spl:c52427059#usbplug:4eade6 | important |
320
321### New
322
3231. Initial version.
324
325------
326
327## rk3528_{bl31,bl32,mcu}_v1.x.bin
328
329| Date       | File                            | Build commit                              | Severity  |
330| ---------- | :------------------------------ | ----------------------------------------- | --------- |
331| 2022-11-28 | rk3528_{bl31,bl32,mcu}_v1.x.bin | bl31:a1a47bee6#bl32:3c36a5cb#mcu:76d14059 | important |
332
333### New
334
3351. Initial version.
336
337------
338
339