xref: /OK3568_Linux_fs/kernel/scripts/dtc/include-prefixes/arm64/rockchip/rk3566-evb-mipitest-v10.dtsi (revision 4882a59341e53eb6f0b4789bf948001014eff981)

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3566.dtsi"
#include "rk3566-evb.dtsi"

/ {
	model = "Rockchip RK3566 EVB MIPITEST V10 Board";
	compatible = "rockchip,rk3566-evb-mipitest-v10", "rockchip,rk3566";

	vcc3v3_pcie: gpio-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_pcie";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <5000>;
		vin-supply = <&dc_12v>;
	};

	rk_headset: rk-headset {
		compatible = "rockchip_headset";
		headset_gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&hp_det>;
	};

	vcc3v3_vga: vcc3v3-vga {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_vga";
		regulator-always-on;
		regulator-boot-on;
		gpio = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		vin-supply = <&vcc3v3_sys>;
	};

	vcc_camera: vcc-camera-regulator {
		compatible = "regulator-fixed";
		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&camera_pwr>;
		regulator-name = "vcc_camera";
		enable-active-high;
		regulator-always-on;
		regulator-boot-on;
	};
};

&audiopwmout_diff {
	status = "disabled";
};

&combphy1_usq {
	status = "okay";
};

&combphy2_psq {
	status = "okay";
};

&csi2_dphy_hw {
	status = "okay";
};

&csi2_dphy1 {
	status = "okay";

	/*
	 * dphy1 only used for split mode,
	 * can be used  concurrently  with dphy2
	 * full mode and split mode are mutually exclusive
	 */
	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			dphy1_in: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&ov5695_out>;
				data-lanes = <1 2>;
			};
		};

		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			dphy1_out: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&isp0_in>;
			};
		};
	};
};

&csi2_dphy2 {
	status = "okay";

	/*
	 * dphy2 only used for split mode,
	 * can be used  concurrently  with dphy1
	 * full mode and split mode are mutually exclusive
	 */
	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			dphy2_in: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&ov02k10_out>;
				data-lanes = <1 2>;
			};
		};

		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			dphy2_out: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&mipi_csi2_input>;
			};
		};
	};
};

&dig_acodec {
	status = "disabled";
	rockchip,pwm-output-mode;
	pinctrl-names = "default";
	pinctrl-0 = <&audiopwm_loutp
		&audiopwm_loutn
		&audiopwm_routp
		&audiopwm_routn
	>;
};

/*
 * video_phy0 needs to be enabled
 * when dsi0 is enabled
 */
&dsi0 {
	status = "okay";
};

&dsi0_in_vp0 {
	status = "disabled";
};

&dsi0_in_vp1 {
	status = "okay";
};

&dsi0_panel {
	power-supply = <&vcc3v3_lcd0_n>;
	reset-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default";
	pinctrl-0 = <&lcd0_rst_gpio>;
};

/*
 * video_phy1 needs to be enabled
 * when dsi1 is enabled
 */
&dsi1 {
	status = "disabled";
};

&dsi1_in_vp0 {
	status = "disabled";
};

&dsi1_in_vp1 {
	status = "disabled";
};

&dsi1_panel {
	power-supply = <&vcc3v3_lcd1_n>;
	reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default";
	pinctrl-0 = <&lcd1_rst_gpio>;
};

&edp {
	hpd-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&edp_phy {
	status = "okay";
};

&edp_in_vp0 {
	status = "okay";
};

&edp_in_vp1 {
	status = "disabled";
};

/*
 * power-supply should switche to vcc3v3_lcd1_n
 * when mipi panel is connected to dsi1.
 */
&gt1x {
	status = "disabled";
	power-supply = <&vcc3v3_lcd0_n>;
};

&hdmi {
	status = "disabled";
};

&i2c2 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2m1_xfer>;

	/* split mode: lane0/1 */
	ov5695: ov5695@36 {
		status = "okay";
		compatible = "ovti,ov5695";
		reg = <0x36>;
		clocks = <&cru CLK_CAM0_OUT>;
		clock-names = "xvclk";
		power-domains = <&power RK3568_PD_VI>;
		pinctrl-names = "default";
		pinctrl-0 = <&cam_clkout0>;
		reset-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
		pwdn-gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
		/*power-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;*/
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "back";
		rockchip,camera-module-name = "TongJu";
		rockchip,camera-module-lens-name = "CHT842-MD";
		port {
			ov5695_out: endpoint {
				remote-endpoint = <&dphy1_in>;
				data-lanes = <1 2>;
			};
		};
	};

	ov02k10: ov02k10@36 {
		status = "okay";
		compatible = "ovti,ov02k10";
		reg = <0x36>;
		clocks = <&cru CLK_CAM1_OUT>;
		clock-names = "xvclk";
		pinctrl-names = "default";
		pinctrl-0 = <&cam_clkout1>;
		reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
		pwdn-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
		power-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "back";
		rockchip,camera-module-name = "TongJu";
		rockchip,camera-module-lens-name = "CHT842-MD";
		port {
			ov02k10_out: endpoint {
				remote-endpoint = <&dphy2_in>;
				data-lanes = <1 2>;
			};
		};
	};
};

&i2s3_2ch {
	status = "disabled";
};

&mipi_csi2 {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			mipi_csi2_input: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&dphy2_out>;
				data-lanes = <1 2>;
			};
		};

		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			mipi_csi2_output: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&cif_mipi_in>;
				data-lanes = <1 2>;
			};
		};
	};
};

&video_phy0 {
	status = "okay";
};

&video_phy1 {
	status = "disabled";
};

&pcie2x1 {
	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "disabled";
};

&pdm {
	status = "disabled";
	pinctrl-names = "default";
	pinctrl-0 = <&pdmm1_clk1
		     &pdmm1_sdi1
		     &pdmm1_sdi2
		     &pdmm1_sdi3>;
};

&pdmics {
	status = "disabled";
};

&pdm_mic_array {
	status = "disabled";
};

&rkcif {
	status = "okay";
};

&rkcif_mipi_lvds {
	status = "okay";

	port {
		cif_mipi_in: endpoint {
			remote-endpoint = <&mipi_csi2_output>;
			data-lanes = <1 2>;
		};
	};
};

&rkcif_mmu {
	status = "okay";
};

&rkisp {
	status = "okay";
};

&rkisp_mmu {
	status = "okay";
};

&rkisp_vir0 {
	status = "okay";

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		isp0_in: endpoint@0 {
			reg = <0>;
			remote-endpoint = <&dphy1_out>;
		};
	};
};

&route_dsi0 {
	status = "okay";
	connect = <&vp1_out_dsi0>;
};

&sdmmc2 {
	max-frequency = <150000000>;
	no-sd;
	no-mmc;
	bus-width = <4>;
	disable-wp;
	cap-sd-highspeed;
	cap-sdio-irq;
	keep-power-in-suspend;
	mmc-pwrseq = <&sdio_pwrseq>;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
	sd-uhs-sdr104;
	status = "okay";
};

&uart1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn>;
};

&u2phy1_host {
	status = "disabled";
};

&u2phy1_otg {
	status = "disabled";
};

&usb2phy1 {
	status = "disabled";
};

&usb_host1_ohci {
	status = "disabled";
};

&vcc3v3_lcd0_n {
	gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
	enable-active-high;
};

&vcc3v3_lcd1_n {
	gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
	enable-active-high;
};

&wireless_bluetooth {
	uart_rts_gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default", "rts_gpio";
	pinctrl-0 = <&uart1m1_rtsn>;
	pinctrl-1 = <&uart1_gpios>;
	BT,reset_gpio    = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
	BT,wake_gpio     = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
	BT,wake_host_irq = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
	status = "disabled";
};

&wireless_wlan {
	status = "disabled";
	pinctrl-names = "default";
	pinctrl-0 = <&wifi_host_wake_irq>;
	WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
};

&pinctrl {
	cam {
		camera_pwr: camera-pwr {
			rockchip,pins =
				/* camera power en */
				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	headphone {
		hp_det: hp-det {
			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	lcd0 {
		lcd0_rst_gpio: lcd0-rst-gpio {
			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	lcd1 {
		lcd1_rst_gpio: lcd1-rst-gpio {
			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	wireless-wlan {
		wifi_host_wake_irq: wifi-host-wake-irq {
			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	wireless-bluetooth {
		uart1_gpios: uart1-gpios {
			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};