1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /****************************************************************************** 3 * 4 * Copyright(c) 2013 - 2017 Realtek Corporation. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of version 2 of the GNU General Public License as 8 * published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, but WITHOUT 11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 * more details. 14 * 15 *****************************************************************************/ 16 #ifdef CONFIG_BT_COEXIST 17 18 #ifndef __RTW_BTCOEX_H__ 19 #define __RTW_BTCOEX_H__ 20 21 #include <drv_types.h> 22 23 /* For H2C: H2C_BT_MP_OPER. Return status definition to the user layer */ 24 typedef enum _BT_CTRL_STATUS { 25 BT_STATUS_SUCCESS = 0x00, /* Success */ 26 BT_STATUS_BT_OP_SUCCESS = 0x01, /* bt fw op execution success */ 27 BT_STATUS_H2C_SUCCESS = 0x02, /* H2c success */ 28 BT_STATUS_H2C_FAIL = 0x03, /* H2c fail */ 29 BT_STATUS_H2C_LENGTH_EXCEEDED = 0x04, /* H2c command length exceeded */ 30 BT_STATUS_H2C_TIMTOUT = 0x05, /* H2c timeout */ 31 BT_STATUS_H2C_BT_NO_RSP = 0x06, /* H2c sent, bt no rsp */ 32 BT_STATUS_C2H_SUCCESS = 0x07, /* C2h success */ 33 BT_STATUS_C2H_REQNUM_MISMATCH = 0x08, /* bt fw wrong rsp */ 34 BT_STATUS_OPCODE_U_VERSION_MISMATCH = 0x08, /* Upper layer OP code version mismatch. */ 35 BT_STATUS_OPCODE_L_VERSION_MISMATCH = 0x0a, /* Lower layer OP code version mismatch. */ 36 BT_STATUS_UNKNOWN_OPCODE_U = 0x0b, /* Unknown Upper layer OP code */ 37 BT_STATUS_UNKNOWN_OPCODE_L = 0x0c, /* Unknown Lower layer OP code */ 38 BT_STATUS_PARAMETER_FORMAT_ERROR_U = 0x0d, /* Wrong parameters sent by upper layer. */ 39 BT_STATUS_PARAMETER_FORMAT_ERROR_L = 0x0e, /* bt fw parameter format is not consistency */ 40 BT_STATUS_PARAMETER_OUT_OF_RANGE_U = 0x0f, /* uppery layer parameter value is out of range */ 41 BT_STATUS_PARAMETER_OUT_OF_RANGE_L = 0x10, /* bt fw parameter value is out of range */ 42 BT_STATUS_UNKNOWN_STATUS_L = 0x11, /* bt returned an defined status code */ 43 BT_STATUS_UNKNOWN_STATUS_H = 0x12, /* driver need to do error handle or not handle-well. */ 44 BT_STATUS_WRONG_LEVEL = 0x13, /* should be under passive level */ 45 BT_STATUS_NOT_IMPLEMENT = 0x14, /* op code not implemented yet */ 46 BT_STATUS_BT_STACK_OP_SUCCESS = 0x15, /* bt stack op execution success */ 47 BT_STATUS_BT_STACK_NOT_SUPPORT = 0x16, /* stack version not support this. */ 48 BT_STATUS_BT_STACK_SEND_HCI_EVENT_FAIL = 0x17, /* send hci event fail */ 49 BT_STATUS_BT_STACK_NOT_BIND = 0x18, /* stack not bind wifi driver */ 50 BT_STATUS_BT_STACK_NO_RSP = 0x19, /* stack doesn't have any rsp. */ 51 BT_STATUS_MAX 52 } BT_CTRL_STATUS, *PBT_CTRL_STATUS; 53 54 typedef enum _BTCOEX_SUSPEND_STATE { 55 BTCOEX_SUSPEND_STATE_RESUME = 0x0, 56 BTCOEX_SUSPEND_STATE_SUSPEND = 0x1, 57 BTCOEX_SUSPEND_STATE_SUSPEND_KEEP_ANT = 0x2, 58 BTCOEX_SUSPEND_STATE_MAX 59 } BTCOEX_SUSPEND_STATE, *PBTCOEX_SUSPEND_STATE; 60 61 #define SET_BT_MP_OPER_RET(OpCode, StatusCode) ((OpCode << 8) | StatusCode) 62 #define GET_OP_CODE_FROM_BT_MP_OPER_RET(RetCode) ((RetCode & 0xF0) >> 8) 63 #define GET_STATUS_CODE_FROM_BT_MP_OPER_RET(RetCode) (RetCode & 0x0F) 64 #define CHECK_STATUS_CODE_FROM_BT_MP_OPER_RET(RetCode, StatusCode) (GET_STATUS_CODE_FROM_BT_MP_OPER_RET(RetCode) == StatusCode) 65 66 #ifdef CONFIG_BT_COEXIST_SOCKET_TRX 67 68 #define NETLINK_USER 31 69 #define CONNECT_PORT 30000 70 #define CONNECT_PORT_BT 30001 71 #define KERNEL_SOCKET_OK 0x01 72 #define NETLINK_SOCKET_OK 0x02 73 74 #define OTHER 0 75 #define RX_ATTEND_ACK 1 76 #define RX_LEAVE_ACK 2 77 #define RX_BT_LEAVE 3 78 #define RX_INVITE_REQ 4 79 #define RX_ATTEND_REQ 5 80 #define RX_INVITE_RSP 6 81 82 #define invite_req "INVITE_REQ" 83 #define invite_rsp "INVITE_RSP" 84 #define attend_req "ATTEND_REQ" 85 #define attend_ack "ATTEND_ACK" 86 #define wifi_leave "WIFI_LEAVE" 87 #define leave_ack "LEAVE_ACK" 88 #define bt_leave "BT_LEAVE" 89 90 #define BT_INFO_NOTIFY_CMD 0x0106 91 #define BT_INFO_LEN 8 92 93 typedef struct _HCI_LINK_INFO { 94 u16 ConnectHandle; 95 u8 IncomingTrafficMode; 96 u8 OutgoingTrafficMode; 97 u8 BTProfile; 98 u8 BTCoreSpec; 99 s8 BT_RSSI; 100 u8 TrafficProfile; 101 u8 linkRole; 102 } HCI_LINK_INFO, *PHCI_LINK_INFO; 103 104 #define MAX_BT_ACL_LINK_NUM 8 105 106 typedef struct _HCI_EXT_CONFIG { 107 HCI_LINK_INFO aclLink[MAX_BT_ACL_LINK_NUM]; 108 u8 btOperationCode; 109 u16 CurrentConnectHandle; 110 u8 CurrentIncomingTrafficMode; 111 u8 CurrentOutgoingTrafficMode; 112 113 u8 NumberOfACL; 114 u8 NumberOfSCO; 115 u8 CurrentBTStatus; 116 u16 HCIExtensionVer; 117 118 BOOLEAN bEnableWifiScanNotify; 119 } HCI_EXT_CONFIG, *PHCI_EXT_CONFIG; 120 121 typedef struct _HCI_PHY_LINK_BSS_INFO { 122 u16 bdCap; /* capability information */ 123 124 /* Qos related. Added by Annie, 2005-11-01. */ 125 /* BSS_QOS BssQos; */ 126 127 } HCI_PHY_LINK_BSS_INFO, *PHCI_PHY_LINK_BSS_INFO; 128 129 typedef enum _BT_CONNECT_TYPE { 130 BT_CONNECT_AUTH_REQ = 0x00, 131 BT_CONNECT_AUTH_RSP = 0x01, 132 BT_CONNECT_ASOC_REQ = 0x02, 133 BT_CONNECT_ASOC_RSP = 0x03, 134 BT_DISCONNECT = 0x04 135 } BT_CONNECT_TYPE, *PBT_CONNECT_TYPE; 136 137 138 typedef struct _PACKET_IRP_HCIEVENT_DATA { 139 u8 EventCode; 140 u8 Length; /* total cmd length = extension event length+1(extension event code length) */ 141 u8 Data[1]; /* byte1 is extension event code */ 142 } rtw_HCI_event; 143 144 145 struct btinfo_8761ATV { 146 u8 cid; 147 u8 len; 148 149 u8 bConnection:1; 150 u8 bSCOeSCO:1; 151 u8 bInQPage:1; 152 u8 bACLBusy:1; 153 u8 bSCOBusy:1; 154 u8 bHID:1; 155 u8 bA2DP:1; 156 u8 bFTP:1; 157 158 u8 retry_cnt:4; 159 u8 rsvd_34:1; 160 u8 bPage:1; 161 u8 TRxMask:1; 162 u8 Sniff_attempt:1; 163 164 u8 rssi; 165 166 u8 A2dp_rate:1; 167 u8 ReInit:1; 168 u8 MaxPower:1; 169 u8 bEnIgnoreWlanAct:1; 170 u8 TxPowerLow:1; 171 u8 TxPowerHigh:1; 172 u8 eSCO_SCO:1; 173 u8 Master_Slave:1; 174 175 u8 ACL_TRx_TP_low; 176 u8 ACL_TRx_TP_high; 177 }; 178 179 #define HCIOPCODE(_OCF, _OGF) ((_OGF)<<10|(_OCF)) 180 #define HCIOPCODELOW(_OCF, _OGF) (u8)(HCIOPCODE(_OCF, _OGF) & 0x00ff) 181 #define HCIOPCODEHIGHT(_OCF, _OGF) (u8)(HCIOPCODE(_OCF, _OGF)>>8) 182 #define HCI_OGF(opCode) (unsigned char)((0xFC00 & (opCode)) >> 10) 183 #define HCI_OCF(opCode) (0x3FF & (opCode)) 184 185 186 typedef enum _HCI_STATUS { 187 HCI_STATUS_SUCCESS = 0x00, /* Success */ 188 HCI_STATUS_UNKNOW_HCI_CMD = 0x01, /* Unknown HCI Command */ 189 HCI_STATUS_UNKNOW_CONNECT_ID = 0X02, /* Unknown Connection Identifier */ 190 HCI_STATUS_HW_FAIL = 0X03, /* Hardware Failure */ 191 HCI_STATUS_PAGE_TIMEOUT = 0X04, /* Page Timeout */ 192 HCI_STATUS_AUTH_FAIL = 0X05, /* Authentication Failure */ 193 HCI_STATUS_PIN_OR_KEY_MISSING = 0X06, /* PIN or Key Missing */ 194 HCI_STATUS_MEM_CAP_EXCEED = 0X07, /* Memory Capacity Exceeded */ 195 HCI_STATUS_CONNECT_TIMEOUT = 0X08, /* Connection Timeout */ 196 HCI_STATUS_CONNECT_LIMIT = 0X09, /* Connection Limit Exceeded */ 197 HCI_STATUS_SYN_CONNECT_LIMIT = 0X0a, /* Synchronous Connection Limit To A Device Exceeded */ 198 HCI_STATUS_ACL_CONNECT_EXISTS = 0X0b, /* ACL Connection Already Exists */ 199 HCI_STATUS_CMD_DISALLOW = 0X0c, /* Command Disallowed */ 200 HCI_STATUS_CONNECT_RJT_LIMIT_RESOURCE = 0X0d, /* Connection Rejected due to Limited Resources */ 201 HCI_STATUS_CONNECT_RJT_SEC_REASON = 0X0e, /* Connection Rejected Due To Security Reasons */ 202 HCI_STATUS_CONNECT_RJT_UNACCEPT_BD_ADDR = 0X0f, /* Connection Rejected due to Unacceptable BD_ADDR */ 203 HCI_STATUS_CONNECT_ACCEPT_TIMEOUT = 0X10, /* Connection Accept Timeout Exceeded */ 204 HCI_STATUS_UNSUPPORT_FEATURE_PARA_VALUE = 0X11, /* Unsupported Feature or Parameter Value */ 205 HCI_STATUS_INVALID_HCI_CMD_PARA_VALUE = 0X12, /* Invalid HCI Command Parameters */ 206 HCI_STATUS_REMOTE_USER_TERMINATE_CONNECT = 0X13, /* Remote User Terminated Connection */ 207 HCI_STATUS_REMOTE_DEV_TERMINATE_LOW_RESOURCE = 0X14, /* Remote Device Terminated Connection due to Low Resources */ 208 HCI_STATUS_REMOTE_DEV_TERMINATE_CONNECT_POWER_OFF = 0X15, /* Remote Device Terminated Connection due to Power Off */ 209 HCI_STATUS_CONNECT_TERMINATE_LOCAL_HOST = 0X16, /* Connection Terminated By Local Host */ 210 HCI_STATUS_REPEATE_ATTEMPT = 0X17, /* Repeated Attempts */ 211 HCI_STATUS_PAIR_NOT_ALLOW = 0X18, /* Pairing Not Allowed */ 212 HCI_STATUS_UNKNOW_LMP_PDU = 0X19, /* Unknown LMP PDU */ 213 HCI_STATUS_UNSUPPORT_REMOTE_LMP_FEATURE = 0X1a, /* Unsupported Remote Feature / Unsupported LMP Feature */ 214 HCI_STATUS_SOC_OFFSET_REJECT = 0X1b, /* SCO Offset Rejected */ 215 HCI_STATUS_SOC_INTERVAL_REJECT = 0X1c, /* SCO Interval Rejected */ 216 HCI_STATUS_SOC_AIR_MODE_REJECT = 0X1d, /* SCO Air Mode Rejected */ 217 HCI_STATUS_INVALID_LMP_PARA = 0X1e, /* Invalid LMP Parameters */ 218 HCI_STATUS_UNSPECIFIC_ERROR = 0X1f, /* Unspecified Error */ 219 HCI_STATUS_UNSUPPORT_LMP_PARA_VALUE = 0X20, /* Unsupported LMP Parameter Value */ 220 HCI_STATUS_ROLE_CHANGE_NOT_ALLOW = 0X21, /* Role Change Not Allowed */ 221 HCI_STATUS_LMP_RESPONSE_TIMEOUT = 0X22, /* LMP Response Timeout */ 222 HCI_STATUS_LMP_ERROR_TRANSACTION_COLLISION = 0X23, /* LMP Error Transaction Collision */ 223 HCI_STATUS_LMP_PDU_NOT_ALLOW = 0X24, /* LMP PDU Not Allowed */ 224 HCI_STATUS_ENCRYPTION_MODE_NOT_ALLOW = 0X25, /* Encryption Mode Not Acceptable */ 225 HCI_STATUS_LINK_KEY_CAN_NOT_CHANGE = 0X26, /* Link Key Can Not be Changed */ 226 HCI_STATUS_REQUEST_QOS_NOT_SUPPORT = 0X27, /* Requested QoS Not Supported */ 227 HCI_STATUS_INSTANT_PASSED = 0X28, /* Instant Passed */ 228 HCI_STATUS_PAIRING_UNIT_KEY_NOT_SUPPORT = 0X29, /* Pairing With Unit Key Not Supported */ 229 HCI_STATUS_DIFFERENT_TRANSACTION_COLLISION = 0X2a, /* Different Transaction Collision */ 230 HCI_STATUS_RESERVE_1 = 0X2b, /* Reserved */ 231 HCI_STATUS_QOS_UNACCEPT_PARA = 0X2c, /* QoS Unacceptable Parameter */ 232 HCI_STATUS_QOS_REJECT = 0X2d, /* QoS Rejected */ 233 HCI_STATUS_CHNL_CLASSIFICATION_NOT_SUPPORT = 0X2e, /* Channel Classification Not Supported */ 234 HCI_STATUS_INSUFFICIENT_SECURITY = 0X2f, /* Insufficient Security */ 235 HCI_STATUS_PARA_OUT_OF_RANGE = 0x30, /* Parameter Out Of Mandatory Range */ 236 HCI_STATUS_RESERVE_2 = 0X31, /* Reserved */ 237 HCI_STATUS_ROLE_SWITCH_PENDING = 0X32, /* Role Switch Pending */ 238 HCI_STATUS_RESERVE_3 = 0X33, /* Reserved */ 239 HCI_STATUS_RESERVE_SOLT_VIOLATION = 0X34, /* Reserved Slot Violation */ 240 HCI_STATUS_ROLE_SWITCH_FAIL = 0X35, /* Role Switch Failed */ 241 HCI_STATUS_EXTEND_INQUIRY_RSP_TOO_LARGE = 0X36, /* Extended Inquiry Response Too Large */ 242 HCI_STATUS_SEC_SIMPLE_PAIRING_NOT_SUPPORT = 0X37, /* Secure Simple Pairing Not Supported By Host. */ 243 HCI_STATUS_HOST_BUSY_PAIRING = 0X38, /* Host Busy - Pairing */ 244 HCI_STATUS_CONNECT_REJ_NOT_SUIT_CHNL_FOUND = 0X39, /* Connection Rejected due to No Suitable Channel Found */ 245 HCI_STATUS_CONTROLLER_BUSY = 0X3a /* CONTROLLER BUSY */ 246 } RTW_HCI_STATUS; 247 248 #define HCI_EVENT_COMMAND_COMPLETE 0x0e 249 250 #define OGF_EXTENSION 0X3f 251 typedef enum HCI_EXTENSION_COMMANDS { 252 HCI_SET_ACL_LINK_DATA_FLOW_MODE = 0x0010, 253 HCI_SET_ACL_LINK_STATUS = 0x0020, 254 HCI_SET_SCO_LINK_STATUS = 0x0030, 255 HCI_SET_RSSI_VALUE = 0x0040, 256 HCI_SET_CURRENT_BLUETOOTH_STATUS = 0x0041, 257 258 /* The following is for RTK8723 */ 259 HCI_EXTENSION_VERSION_NOTIFY = 0x0100, 260 HCI_LINK_STATUS_NOTIFY = 0x0101, 261 HCI_BT_OPERATION_NOTIFY = 0x0102, 262 HCI_ENABLE_WIFI_SCAN_NOTIFY = 0x0103, 263 HCI_QUERY_RF_STATUS = 0x0104, 264 HCI_BT_ABNORMAL_NOTIFY = 0x0105, 265 HCI_BT_INFO_NOTIFY = 0x0106, 266 HCI_BT_COEX_NOTIFY = 0x0107, 267 HCI_BT_PATCH_VERSION_NOTIFY = 0x0108, 268 HCI_BT_AFH_MAP_NOTIFY = 0x0109, 269 HCI_BT_REGISTER_VALUE_NOTIFY = 0x010a, 270 271 /* The following is for IVT */ 272 HCI_WIFI_CURRENT_CHANNEL = 0x0300, 273 HCI_WIFI_CURRENT_BANDWIDTH = 0x0301, 274 HCI_WIFI_CONNECTION_STATUS = 0x0302 275 } RTW_HCI_EXT_CMD; 276 277 #define HCI_EVENT_EXTENSION_RTK 0xfe 278 typedef enum HCI_EXTENSION_EVENT_RTK { 279 HCI_EVENT_EXT_WIFI_SCAN_NOTIFY = 0x01, 280 HCI_EVENT_EXT_WIFI_RF_STATUS_NOTIFY = 0x02, 281 HCI_EVENT_EXT_BT_INFO_CONTROL = 0x03, 282 HCI_EVENT_EXT_BT_COEX_CONTROL = 0x04 283 } RTW_HCI_EXT_EVENT; 284 285 typedef enum _BT_TRAFFIC_MODE { 286 BT_MOTOR_EXT_BE = 0x00, /* Best Effort. Default. for HCRP, PAN, SDP, RFCOMM-based profiles like FTP,OPP, SPP, DUN, etc. */ 287 BT_MOTOR_EXT_GUL = 0x01, /* Guaranteed Latency. This type of traffic is used e.g. for HID and AVRCP. */ 288 BT_MOTOR_EXT_GUB = 0X02, /* Guaranteed Bandwidth. */ 289 BT_MOTOR_EXT_GULB = 0X03 /* Guaranteed Latency and Bandwidth. for A2DP and VDP. */ 290 } BT_TRAFFIC_MODE; 291 292 typedef enum _BT_TRAFFIC_MODE_PROFILE { 293 BT_PROFILE_NONE, 294 BT_PROFILE_A2DP, 295 BT_PROFILE_PAN , 296 BT_PROFILE_HID, 297 BT_PROFILE_SCO 298 } BT_TRAFFIC_MODE_PROFILE; 299 300 typedef enum _HCI_EXT_BT_OPERATION { 301 HCI_BT_OP_NONE = 0x0, 302 HCI_BT_OP_INQUIRY_START = 0x1, 303 HCI_BT_OP_INQUIRY_FINISH = 0x2, 304 HCI_BT_OP_PAGING_START = 0x3, 305 HCI_BT_OP_PAGING_SUCCESS = 0x4, 306 HCI_BT_OP_PAGING_UNSUCCESS = 0x5, 307 HCI_BT_OP_PAIRING_START = 0x6, 308 HCI_BT_OP_PAIRING_FINISH = 0x7, 309 HCI_BT_OP_BT_DEV_ENABLE = 0x8, 310 HCI_BT_OP_BT_DEV_DISABLE = 0x9, 311 HCI_BT_OP_MAX 312 } HCI_EXT_BT_OPERATION, *PHCI_EXT_BT_OPERATION; 313 314 typedef struct _BT_MGNT { 315 BOOLEAN bBTConnectInProgress; 316 BOOLEAN bLogLinkInProgress; 317 BOOLEAN bPhyLinkInProgress; 318 BOOLEAN bPhyLinkInProgressStartLL; 319 u8 BtCurrentPhyLinkhandle; 320 u16 BtCurrentLogLinkhandle; 321 u8 CurrentConnectEntryNum; 322 u8 DisconnectEntryNum; 323 u8 CurrentBTConnectionCnt; 324 BT_CONNECT_TYPE BTCurrentConnectType; 325 BT_CONNECT_TYPE BTReceiveConnectPkt; 326 u8 BTAuthCount; 327 u8 BTAsocCount; 328 BOOLEAN bStartSendSupervisionPkt; 329 BOOLEAN BtOperationOn; 330 BOOLEAN BTNeedAMPStatusChg; 331 BOOLEAN JoinerNeedSendAuth; 332 HCI_PHY_LINK_BSS_INFO bssDesc; 333 HCI_EXT_CONFIG ExtConfig; 334 BOOLEAN bNeedNotifyAMPNoCap; 335 BOOLEAN bCreateSpportQos; 336 BOOLEAN bSupportProfile; 337 u8 BTChannel; 338 BOOLEAN CheckChnlIsSuit; 339 BOOLEAN bBtScan; 340 BOOLEAN btLogoTest; 341 BOOLEAN bRfStatusNotified; 342 BOOLEAN bBtRsvedPageDownload; 343 } BT_MGNT, *PBT_MGNT; 344 345 struct bt_coex_info { 346 /* For Kernel Socket */ 347 struct socket *udpsock; 348 struct sockaddr_in wifi_sockaddr; /*wifi socket*/ 349 struct sockaddr_in bt_sockaddr;/* BT socket */ 350 struct sock *sk_store;/*back up socket for UDP RX int*/ 351 352 /* store which socket is OK */ 353 u8 sock_open; 354 355 u8 BT_attend; 356 u8 is_exist; /* socket exist */ 357 BT_MGNT BtMgnt; 358 struct workqueue_struct *btcoex_wq; 359 struct delayed_work recvmsg_work; 360 }; 361 #endif /* CONFIG_BT_COEXIST_SOCKET_TRX */ 362 363 #define PACKET_NORMAL 0 364 #define PACKET_DHCP 1 365 #define PACKET_ARP 2 366 #define PACKET_EAPOL 3 367 368 void rtw_btcoex_Initialize(PADAPTER); 369 void rtw_btcoex_PowerOnSetting(PADAPTER padapter); 370 void rtw_btcoex_AntInfoSetting(PADAPTER padapter); 371 void rtw_btcoex_PowerOffSetting(PADAPTER padapter); 372 void rtw_btcoex_PreLoadFirmware(PADAPTER padapter); 373 void rtw_btcoex_HAL_Initialize(PADAPTER padapter, u8 bWifiOnly); 374 void rtw_btcoex_IpsNotify(PADAPTER, u8 type); 375 void rtw_btcoex_LpsNotify(PADAPTER, u8 type); 376 void rtw_btcoex_ScanNotify(PADAPTER, u8 type); 377 void rtw_btcoex_MediaStatusNotify(PADAPTER, u8 mediaStatus); 378 void rtw_btcoex_SpecialPacketNotify(PADAPTER, u8 pktType); 379 void rtw_btcoex_IQKNotify(PADAPTER padapter, u8 state); 380 void rtw_btcoex_BtInfoNotify(PADAPTER, u8 length, u8 *tmpBuf); 381 void rtw_btcoex_BtMpRptNotify(PADAPTER, u8 length, u8 *tmpBuf); 382 void rtw_btcoex_SuspendNotify(PADAPTER, u8 state); 383 void rtw_btcoex_HaltNotify(PADAPTER); 384 void rtw_btcoex_switchband_notify(u8 under_scan, u8 band_type); 385 void rtw_btcoex_WlFwDbgInfoNotify(PADAPTER padapter, u8* tmpBuf, u8 length); 386 void rtw_btcoex_rx_rate_change_notify(PADAPTER padapter, u8 is_data_frame, u8 rate_id); 387 void rtw_btcoex_SwitchBtTRxMask(PADAPTER); 388 void rtw_btcoex_Switch(PADAPTER, u8 enable); 389 u8 rtw_btcoex_IsBtDisabled(PADAPTER); 390 void rtw_btcoex_Handler(PADAPTER); 391 s32 rtw_btcoex_IsBTCoexRejectAMPDU(PADAPTER padapter); 392 s32 rtw_btcoex_IsBTCoexCtrlAMPDUSize(PADAPTER); 393 u32 rtw_btcoex_GetAMPDUSize(PADAPTER); 394 void rtw_btcoex_SetManualControl(PADAPTER, u8 bmanual); 395 u8 rtw_btcoex_1Ant(PADAPTER); 396 u8 rtw_btcoex_IsBtControlLps(PADAPTER); 397 u8 rtw_btcoex_IsLpsOn(PADAPTER); 398 u8 rtw_btcoex_RpwmVal(PADAPTER); 399 u8 rtw_btcoex_LpsVal(PADAPTER); 400 u32 rtw_btcoex_GetRaMask(PADAPTER); 401 u8 rtw_btcoex_query_reduced_wl_pwr_lvl(PADAPTER padapter); 402 void rtw_btcoex_set_reduced_wl_pwr_lvl(PADAPTER padapter, u8 val); 403 void rtw_btcoex_do_reduce_wl_pwr_lvl(PADAPTER padapter); 404 void rtw_btcoex_RecordPwrMode(PADAPTER, u8 *pCmdBuf, u8 cmdLen); 405 void rtw_btcoex_DisplayBtCoexInfo(PADAPTER, u8 *pbuf, u32 bufsize); 406 void rtw_btcoex_SetDBG(PADAPTER, u32 *pDbgModule); 407 u32 rtw_btcoex_GetDBG(PADAPTER, u8 *pStrBuf, u32 bufSize); 408 u8 rtw_btcoex_IncreaseScanDeviceNum(PADAPTER); 409 u8 rtw_btcoex_IsBtLinkExist(PADAPTER); 410 void rtw_btcoex_pta_off_on_notify(PADAPTER padapter, u8 bBTON); 411 412 #ifdef CONFIG_RF4CE_COEXIST 413 void rtw_btcoex_SetRf4ceLinkState(PADAPTER padapter, u8 state); 414 u8 rtw_btcoex_GetRf4ceLinkState(PADAPTER padapter); 415 #endif 416 417 #ifdef CONFIG_BT_COEXIST_SOCKET_TRX 418 void rtw_btcoex_SetBtPatchVersion(PADAPTER padapter, u16 btHciVer, u16 btPatchVer); 419 void rtw_btcoex_SetHciVersion(PADAPTER padapter, u16 hciVersion); 420 void rtw_btcoex_StackUpdateProfileInfo(void); 421 void rtw_btcoex_init_socket(_adapter *padapter); 422 void rtw_btcoex_close_socket(_adapter *padapter); 423 void rtw_btcoex_dump_tx_msg(u8 *tx_msg, u8 len, u8 *msg_name); 424 u8 rtw_btcoex_sendmsgbysocket(_adapter *padapter, u8 *msg, u8 msg_size, bool force); 425 u8 rtw_btcoex_create_kernel_socket(_adapter *padapter); 426 void rtw_btcoex_close_kernel_socket(_adapter *padapter); 427 void rtw_btcoex_recvmsgbysocket(void *data); 428 u16 rtw_btcoex_parse_recv_data(u8 *msg, u8 msg_size); 429 u8 rtw_btcoex_btinfo_cmd(PADAPTER padapter, u8 *pbuf, u16 length); 430 void rtw_btcoex_parse_hci_cmd(_adapter *padapter, u8 *cmd, u16 len); 431 void rtw_btcoex_SendEventExtBtCoexControl(PADAPTER Adapter, u8 bNeedDbgRsp, u8 dataLen, void *pData); 432 void rtw_btcoex_SendEventExtBtInfoControl(PADAPTER Adapter, u8 dataLen, void *pData); 433 void rtw_btcoex_SendScanNotify(PADAPTER padapter, u8 scanType); 434 #define BT_SendEventExtBtCoexControl(Adapter, bNeedDbgRsp, dataLen, pData) rtw_btcoex_SendEventExtBtCoexControl(Adapter, bNeedDbgRsp, dataLen, pData) 435 #define BT_SendEventExtBtInfoControl(Adapter, dataLen, pData) rtw_btcoex_SendEventExtBtInfoControl(Adapter, dataLen, pData) 436 #endif /* CONFIG_BT_COEXIST_SOCKET_TRX */ 437 u16 rtw_btcoex_btreg_read(PADAPTER padapter, u8 type, u16 addr, u32 *data); 438 u16 rtw_btcoex_btreg_write(PADAPTER padapter, u8 type, u16 addr, u16 val); 439 u8 rtw_btcoex_get_reduce_wl_txpwr(PADAPTER padapter); 440 u8 rtw_btcoex_get_bt_coexist(PADAPTER padapter); 441 u8 rtw_btcoex_get_chip_type(PADAPTER padapter); 442 u8 rtw_btcoex_get_pg_ant_num(PADAPTER padapter); 443 u8 rtw_btcoex_get_pg_single_ant_path(PADAPTER padapter); 444 u8 rtw_btcoex_get_pg_rfe_type(PADAPTER padapter); 445 u8 rtw_btcoex_is_tfbga_package_type(PADAPTER padapter); 446 u8 rtw_btcoex_get_ant_div_cfg(PADAPTER padapter); 447 u16 rtw_btcoex_btset_testmode(PADAPTER padapter, u8 type); 448 449 /* ================================================== 450 * Below Functions are called by BT-Coex 451 * ================================================== */ 452 void rtw_btcoex_rx_ampdu_apply(PADAPTER padapter); 453 void rtw_btcoex_LPS_Enter(PADAPTER padapter); 454 u8 rtw_btcoex_LPS_Leave(PADAPTER padapter); 455 456 #endif /* __RTW_BTCOEX_H__ */ 457 #endif /* CONFIG_BT_COEXIST */ 458 459 void rtw_btcoex_set_ant_info(PADAPTER padapter); 460 void rtw_btcoex_connect_notify(PADAPTER, u8 join_type); 461 462