1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2// Copyright (c) 2021 Rockchip Electronics Co., Ltd. 3 4/dts-v1/; 5 6#include "rk3588-evb2-lp4.dtsi" 7#include "rk3588-android.dtsi" 8 9/ { 10 model = "Rockchip RK3588 EVB2 LP4 V10 eDP Board"; 11 compatible = "rockchip,rk3588-evb2-lp4-v10-edp", "rockchip,rk3588"; 12 13 panel-edp1 { 14 compatible = "simple-panel"; 15 backlight = <&backlight>; 16 power-supply = <&vcc3v3_lcd>; 17 prepare-delay-ms = <120>; 18 enable-delay-ms = <120>; 19 unprepare-delay-ms = <120>; 20 disable-delay-ms = <120>; 21 width-mm = <129>; 22 height-mm = <171>; 23 24 panel-timing { 25 clock-frequency = <200000000>; 26 hactive = <1536>; 27 vactive = <2048>; 28 hfront-porch = <12>; 29 hsync-len = <16>; 30 hback-porch = <48>; 31 vfront-porch = <8>; 32 vsync-len = <4>; 33 vback-porch = <8>; 34 hsync-active = <0>; 35 vsync-active = <0>; 36 de-active = <0>; 37 pixelclk-active = <0>; 38 }; 39 40 port { 41 panel_in_edp1: endpoint { 42 remote-endpoint = <&edp1_out_panel>; 43 }; 44 }; 45 }; 46 47 vcc3v3_lcd: vcc3v3-lcd { 48 compatible = "regulator-fixed"; 49 regulator-name = "vcc3v3_lcd"; 50 vin-supply = <&vcc_3v3_s0>; 51 }; 52}; 53 54&backlight { 55 enable-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; 56}; 57 58&dp0_in_vp0 { 59 status = "disabled"; 60}; 61 62&dp0_in_vp1 { 63 status = "okay"; 64}; 65 66&dp0_in_vp2 { 67 status = "disabled"; 68}; 69 70&dp1_in_vp0 { 71 status = "disabled"; 72}; 73 74&dp1_in_vp1 { 75 status = "okay"; 76}; 77 78&dp1_in_vp2 { 79 status = "disabled"; 80}; 81 82&dsi1 { 83 status = "disabled"; 84}; 85 86&edp1 { 87 force-hpd; 88 status = "okay"; 89 90 ports { 91 port@1 { 92 reg = <1>; 93 94 edp1_out_panel: endpoint { 95 remote-endpoint = <&panel_in_edp1>; 96 }; 97 }; 98 }; 99}; 100 101&edp1_in_vp0 { 102 status = "disabled"; 103}; 104 105&edp1_in_vp1 { 106 status = "disabled"; 107}; 108 109&edp1_in_vp2 { 110 status = "okay"; 111}; 112 113>1x { 114 status = "disabled"; 115}; 116 117&hdptxphy1 { 118 status = "okay"; 119}; 120 121&i2c6 { 122 clock-frequency = <400000>; 123 status = "okay"; 124 125 gsl3673@40 { 126 compatible = "GSL,GSL3673"; 127 reg = <0x40>; 128 screen_max_x = <1536>; 129 screen_max_y = <2048>; 130 irq_gpio_number = <&gpio0 RK_PD3 IRQ_TYPE_LEVEL_LOW>; 131 rst_gpio_number = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; 132 }; 133}; 134 135&vcc3v3_lcd_n { 136 /delete-property/ gpio; 137}; 138