1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2013 Marek Belisko <marek@goldelico.com> 4 * 5 * Based on omap3-beagle-xm.dts 6 */ 7/dts-v1/; 8 9#include "omap36xx.dtsi" 10#include <dt-bindings/input/input.h> 11 12/ { 13 model = "OMAP3 GTA04"; 14 compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; 15 16 cpus { 17 cpu@0 { 18 cpu0-supply = <&vcc>; 19 }; 20 }; 21 22 memory@80000000 { 23 device_type = "memory"; 24 reg = <0x80000000 0x20000000>; /* 512 MB */ 25 }; 26 27 chosen { 28 stdout-path = &uart3; 29 }; 30 31 aliases { 32 display0 = &lcd; 33 display1 = &tv0; 34 /delete-property/ mmc2; 35 /delete-property/ mmc3; 36 }; 37 38 ldo_3v3: fixedregulator { 39 compatible = "regulator-fixed"; 40 regulator-name = "ldo_3v3"; 41 regulator-min-microvolt = <3300000>; 42 regulator-max-microvolt = <3300000>; 43 regulator-always-on; 44 }; 45 46 /* fixed 26MHz oscillator */ 47 hfclk_26m: oscillator { 48 #clock-cells = <0>; 49 compatible = "fixed-clock"; 50 clock-frequency = <26000000>; 51 }; 52 53 gpio-keys { 54 compatible = "gpio-keys"; 55 56 aux-button { 57 label = "aux"; 58 linux,code = <KEY_PHONE>; 59 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; 60 wakeup-source; 61 }; 62 }; 63 64 antenna-detect { 65 compatible = "gpio-keys"; 66 67 gps_antenna_button: gps-antenna-button { 68 label = "GPS_EXT_ANT"; 69 linux,input-type = <EV_SW>; 70 linux,code = <SW_LINEIN_INSERT>; 71 gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */ 72 interrupt-parent = <&gpio5>; 73 interrupts = <16 IRQ_TYPE_EDGE_BOTH>; 74 debounce-interval = <10>; 75 wakeup-source; 76 }; 77 }; 78 79 sound { 80 compatible = "ti,omap-twl4030"; 81 ti,model = "gta04"; 82 83 ti,mcbsp = <&mcbsp2>; 84 }; 85 86 /* GSM audio */ 87 sound_telephony { 88 compatible = "simple-audio-card"; 89 simple-audio-card,name = "GTA04 voice"; 90 simple-audio-card,bitclock-master = <&telephony_link_master>; 91 simple-audio-card,frame-master = <&telephony_link_master>; 92 simple-audio-card,format = "i2s"; 93 simple-audio-card,bitclock-inversion; 94 simple-audio-card,frame-inversion; 95 simple-audio-card,cpu { 96 sound-dai = <&mcbsp4>; 97 }; 98 99 telephony_link_master: simple-audio-card,codec { 100 sound-dai = <>m601_codec>; 101 }; 102 }; 103 104 gtm601_codec: gsm_codec { 105 compatible = "option,gtm601"; 106 #sound-dai-cells = <0>; 107 }; 108 109 spi_lcd: spi_lcd { 110 compatible = "spi-gpio"; 111 #address-cells = <0x1>; 112 #size-cells = <0x0>; 113 pinctrl-names = "default"; 114 pinctrl-0 = <&spi_gpio_pins>; 115 116 gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; 117 gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; 118 gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; 119 cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; 120 num-chipselects = <1>; 121 122 /* lcd panel */ 123 lcd: td028ttec1@0 { 124 compatible = "tpo,td028ttec1"; 125 reg = <0>; 126 spi-max-frequency = <100000>; 127 spi-cpol; 128 spi-cpha; 129 130 backlight= <&backlight>; 131 label = "lcd"; 132 port { 133 lcd_in: endpoint { 134 remote-endpoint = <&dpi_out>; 135 }; 136 }; 137 }; 138 }; 139 140 backlight: backlight { 141 compatible = "pwm-backlight"; 142 pwms = <&pwm11 0 12000000 0>; 143 pwm-names = "backlight"; 144 brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>; 145 default-brightness-level = <9>; /* => 90 */ 146 pinctrl-names = "default"; 147 pinctrl-0 = <&backlight_pins>; 148 }; 149 150 pwm11: dmtimer-pwm { 151 compatible = "ti,omap-dmtimer-pwm"; 152 ti,timers = <&timer11>; 153 #pwm-cells = <3>; 154 ti,clock-source = <0x01>; 155 }; 156 157 hsusb2_phy: hsusb2_phy { 158 compatible = "usb-nop-xceiv"; 159 reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; 160 #phy-cells = <0>; 161 }; 162 163 tv0: connector { 164 compatible = "composite-video-connector"; 165 label = "tv"; 166 167 port { 168 tv_connector_in: endpoint { 169 remote-endpoint = <&opa_out>; 170 }; 171 }; 172 }; 173 174 tv_amp: opa362 { 175 compatible = "ti,opa362"; 176 enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */ 177 178 ports { 179 #address-cells = <1>; 180 #size-cells = <0>; 181 182 port@0 { 183 reg = <0>; 184 opa_in: endpoint { 185 remote-endpoint = <&venc_out>; 186 }; 187 }; 188 189 port@1 { 190 reg = <1>; 191 opa_out: endpoint { 192 remote-endpoint = <&tv_connector_in>; 193 }; 194 }; 195 }; 196 }; 197 198 wifi_pwrseq: wifi_pwrseq { 199 compatible = "mmc-pwrseq-simple"; 200 reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */ 201 }; 202 203 /* devconf0 setup for mcbsp1 clock pins */ 204 pinmux_mcbsp1@48002274 { 205 compatible = "pinctrl-single"; 206 reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */ 207 #address-cells = <1>; 208 #size-cells = <0>; 209 pinctrl-single,bit-per-mux; 210 pinctrl-single,register-width = <32>; 211 pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */ 212 #pinctrl-cells = <2>; 213 pinctrl-names = "default"; 214 pinctrl-0 = <&mcbsp1_devconf0_pins>; 215 mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins { 216 /* offset bits mask */ 217 pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */ 218 }; 219 }; 220 221 /* devconf1 setup for tvout pins */ 222 pinmux_tv_out@480022d8 { 223 compatible = "pinctrl-single"; 224 reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */ 225 #address-cells = <1>; 226 #size-cells = <0>; 227 pinctrl-single,bit-per-mux; 228 pinctrl-single,register-width = <32>; 229 pinctrl-single,function-mask = <0x81>; /* TV out pin control */ 230 #pinctrl-cells = <2>; 231 pinctrl-names = "default"; 232 pinctrl-0 = <&tv_acbias_devconf1_pins>; 233 tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins { 234 /* offset bits mask */ 235 pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */ 236 }; 237 }; 238}; 239 240&omap3_pmx_wkup { 241 gpio1_pins: pinmux_gpio1_pins { 242 pinctrl-single,pins = < 243 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ 244 OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */ 245 >; 246 }; 247}; 248 249&omap3_pmx_core { 250 pinctrl-names = "default"; 251 pinctrl-0 = < 252 &hsusb2_pins 253 >; 254 255 hsusb2_pins: pinmux_hsusb2_pins { 256 pinctrl-single,pins = < 257 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ 258 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ 259 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ 260 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ 261 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ 262 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ 263 >; 264 }; 265 266 uart1_pins: pinmux_uart1_pins { 267 pinctrl-single,pins = < 268 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ 269 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ 270 >; 271 }; 272 273 uart2_pins: pinmux_uart2_pins { 274 pinctrl-single,pins = < 275 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ 276 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ 277 >; 278 }; 279 280 uart3_pins: pinmux_uart3_pins { 281 pinctrl-single,pins = < 282 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ 283 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ 284 >; 285 }; 286 287 mmc1_pins: pinmux_mmc1_pins { 288 pinctrl-single,pins = < 289 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ 290 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ 291 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ 292 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 293 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 294 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ 295 >; 296 }; 297 298 backlight_pins: backlight_pins_pinmux { 299 pinctrl-single,pins = < 300 OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ 301 >; 302 }; 303 304 dss_dpi_pins: pinmux_dss_dpi_pins { 305 pinctrl-single,pins = < 306 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ 307 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ 308 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ 309 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ 310 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ 311 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ 312 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ 313 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ 314 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ 315 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ 316 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ 317 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ 318 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ 319 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ 320 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ 321 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ 322 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ 323 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ 324 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ 325 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ 326 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ 327 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ 328 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ 329 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ 330 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ 331 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ 332 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ 333 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ 334 >; 335 }; 336 337 gps_pins: pinmux_gps_pins { 338 pinctrl-single,pins = < 339 OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ 340 >; 341 }; 342 343 hdq_pins: hdq_pins { 344 pinctrl-single,pins = < 345 OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ 346 >; 347 }; 348 349 bmp085_pins: pinmux_bmp085_pins { 350 pinctrl-single,pins = < 351 OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */ 352 >; 353 }; 354 355 bma180_pins: pinmux_bma180_pins { 356 pinctrl-single,pins = < 357 OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ 358 >; 359 }; 360 361 itg3200_pins: pinmux_itg3200_pins { 362 pinctrl-single,pins = < 363 OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */ 364 >; 365 }; 366 367 hmc5843_pins: pinmux_hmc5843_pins { 368 pinctrl-single,pins = < 369 OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ 370 >; 371 }; 372 373 penirq_pins: pinmux_penirq_pins { 374 pinctrl-single,pins = < 375 /* here we could enable to wakeup the cpu from suspend by a pen touch */ 376 OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */ 377 >; 378 }; 379 380 camera_pins: pinmux_camera_pins { 381 pinctrl-single,pins = < 382 /* set up parallel camera interface */ 383 OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */ 384 OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */ 385 OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ 386 OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */ 387 OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */ 388 OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */ 389 OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */ 390 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */ 391 OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */ 392 OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */ 393 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */ 394 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */ 395 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */ 396 OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */ 397 OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */ 398 OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ 399 OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ 400 OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */ 401 OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */ 402 OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */ 403 >; 404 }; 405 406 mcbsp1_pins: pinmux_mcbsp1_pins { 407 pinctrl-single,pins = < 408 OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */ 409 OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */ 410 OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ 411 OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ 412 /* mcbsp_clks is used as PENIRQ */ 413 /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) mcbsp_clks.mcbsp_clks */ 414 OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ 415 OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ 416 >; 417 }; 418 419 mcbsp2_pins: pinmux_mcbsp2_pins { 420 pinctrl-single,pins = < 421 OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ 422 OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */ 423 OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */ 424 OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */ 425 >; 426 }; 427 428 mcbsp3_pins: pinmux_mcbsp3_pins { 429 pinctrl-single,pins = < 430 OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */ 431 OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */ 432 OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */ 433 OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */ 434 >; 435 }; 436 437 mcbsp4_pins: pinmux_mcbsp4_pins { 438 pinctrl-single,pins = < 439 OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */ 440 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */ 441 OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */ 442 >; 443 }; 444}; 445 446&omap3_pmx_core2 { 447 pinctrl-names = "default"; 448 pinctrl-0 = < 449 &hsusb2_2_pins 450 >; 451 452 hsusb2_2_pins: pinmux_hsusb2_2_pins { 453 pinctrl-single,pins = < 454 OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ 455 OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ 456 OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ 457 OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ 458 OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ 459 OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ 460 >; 461 }; 462 463 spi_gpio_pins: spi_gpio_pinmux { 464 pinctrl-single,pins = < 465 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ 466 OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */ 467 OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */ 468 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */ 469 >; 470 }; 471}; 472 473&i2c1 { 474 clock-frequency = <2600000>; 475 476 twl: twl@48 { 477 reg = <0x48>; 478 interrupts = <7>; /* SYS_NIRQ cascaded to intc */ 479 interrupt-parent = <&intc>; 480 481 clocks = <&hfclk_26m>; 482 clock-names = "fck"; 483 484 twl_audio: audio { 485 compatible = "ti,twl4030-audio"; 486 ti,enable-vibra = <1>; 487 codec { 488 ti,ramp_delay_value = <3>; 489 }; 490 }; 491 492 twl_power: power { 493 compatible = "ti,twl4030-power"; 494 ti,use_poweroff; 495 }; 496 }; 497}; 498 499#include "twl4030.dtsi" 500#include "twl4030_omap3.dtsi" 501 502&i2c2 { 503 clock-frequency = <400000>; 504 505 /* pressure sensor */ 506 bmp085@77 { 507 compatible = "bosch,bmp085"; 508 reg = <0x77>; 509 pinctrl-names = "default"; 510 pinctrl-0 = <&bmp085_pins>; 511 interrupt-parent = <&gpio4>; 512 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ 513 }; 514 515 /* accelerometer */ 516 bma180@41 { 517 compatible = "bosch,bma180"; 518 reg = <0x41>; 519 pinctrl-names = "default"; 520 pinctrl-0 = <&bma180_pins>; 521 interrupt-parent = <&gpio4>; 522 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ 523 }; 524 525 /* gyroscope */ 526 itg3200@68 { 527 compatible = "invensense,itg3200"; 528 reg = <0x68>; 529 pinctrl-names = "default"; 530 pinctrl-0 = <&itg3200_pins>; 531 interrupt-parent = <&gpio2>; 532 interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */ 533 }; 534 535 /* leds + gpios */ 536 tca6507: tca6507@45 { 537 compatible = "ti,tca6507"; 538 #address-cells = <1>; 539 #size-cells = <0>; 540 reg = <0x45>; 541 542 gpio-controller; 543 #gpio-cells = <2>; 544 545 gta04_led0: red_aux@0 { 546 label = "gta04:red:aux"; 547 reg = <0x0>; 548 }; 549 550 gta04_led1: green_aux@1 { 551 label = "gta04:green:aux"; 552 reg = <0x1>; 553 }; 554 555 gta04_led3: red_power@3 { 556 label = "gta04:red:power"; 557 reg = <0x3>; 558 linux,default-trigger = "default-on"; 559 }; 560 561 gta04_led4: green_power@4 { 562 label = "gta04:green:power"; 563 reg = <0x4>; 564 }; 565 566 wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ 567 reg = <0x6>; 568 compatible = "gpio"; 569 }; 570 }; 571 572 /* compass aka magnetometer */ 573 hmc5843@1e { 574 compatible = "honeywell,hmc5883l"; 575 reg = <0x1e>; 576 pinctrl-names = "default"; 577 pinctrl-0 = <&hmc5843_pins>; 578 interrupt-parent = <&gpio4>; 579 interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */ 580 }; 581 582 /* touchscreen */ 583 tsc2007@48 { 584 compatible = "ti,tsc2007"; 585 reg = <0x48>; 586 pinctrl-names = "default"; 587 pinctrl-0 = <&penirq_pins>; 588 interrupt-parent = <&gpio6>; 589 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ 590 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */ 591 ti,x-plate-ohms = <600>; 592 touchscreen-size-x = <480>; 593 touchscreen-size-y = <640>; 594 touchscreen-max-pressure = <1000>; 595 touchscreen-fuzz-x = <3>; 596 touchscreen-fuzz-y = <8>; 597 touchscreen-fuzz-pressure = <10>; 598 touchscreen-inverted-y; 599 }; 600 601 /* RFID EEPROM */ 602 m24lr64@50 { 603 compatible = "atmel,24c64"; 604 reg = <0x50>; 605 }; 606}; 607 608&i2c3 { 609 clock-frequency = <100000>; 610}; 611 612&usb_otg_hs { 613 interface-type = <0>; 614 usb-phy = <&usb2_phy>; 615 phys = <&usb2_phy>; 616 phy-names = "usb2-phy"; 617 mode = <3>; 618 power = <50>; 619}; 620 621&usbhshost { 622 port2-mode = "ehci-phy"; 623}; 624 625&usbhsehci { 626 phys = <0 &hsusb2_phy>; 627}; 628 629&mmc1 { 630 pinctrl-names = "default"; 631 pinctrl-0 = <&mmc1_pins>; 632 vmmc-supply = <&vmmc1>; 633 bus-width = <4>; 634 ti,non-removable; 635 broken-cd; /* hardware has no CD */ 636}; 637 638&mmc2 { 639 vmmc-supply = <&vaux4>; 640 bus-width = <4>; 641 ti,non-removable; 642 cap-power-off-card; 643 mmc-pwrseq = <&wifi_pwrseq>; 644}; 645 646&mmc3 { 647 status = "disabled"; 648}; 649 650#define BIT(x) (1 << (x)) 651&twl_gpio { 652 /* pullups: BIT(2) */ 653 ti,pullups = <BIT(2)>; 654 /* 655 * pulldowns: 656 * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13) 657 * BIT(15), BIT(16), BIT(17) 658 */ 659 ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) | 660 BIT(13) | BIT(15) | BIT(16) | BIT(17))>; 661}; 662 663&twl_keypad { 664 status = "disabled"; 665}; 666 667&gpio1 { 668 pinctrl-names = "default"; 669 pinctrl-0 = <&gpio1_pins>; 670}; 671 672&uart1 { 673 pinctrl-names = "default"; 674 pinctrl-0 = <&uart1_pins>; 675}; 676 677&uart2 { 678 pinctrl-names = "default"; 679 pinctrl-0 = <&uart2_pins>; 680 gnss: gnss { 681 compatible = "wi2wi,w2sg0004"; 682 pinctrl-names = "default"; 683 pinctrl-0 = <&gps_pins>; 684 sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; 685 lna-supply = <&vsim>; 686 vcc-supply = <&ldo_3v3>; 687 }; 688}; 689 690&uart3 { 691 pinctrl-names = "default"; 692 pinctrl-0 = <&uart3_pins>; 693 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; 694}; 695 696&charger { 697 ti,bb-uvolt = <3200000>; 698 ti,bb-uamp = <150>; 699}; 700 701/* spare */ 702&vaux1 { 703 regulator-min-microvolt = <2500000>; 704 regulator-max-microvolt = <3000000>; 705}; 706 707/* sensors */ 708&vaux2 { 709 regulator-min-microvolt = <2800000>; 710 regulator-max-microvolt = <2800000>; 711 regulator-always-on; /* we should never switch off while vio is on! */ 712}; 713 714/* camera */ 715&vaux3 { 716 regulator-min-microvolt = <2500000>; 717 regulator-max-microvolt = <2500000>; 718}; 719 720/* WLAN/BT */ 721&vaux4 { 722 regulator-min-microvolt = <2800000>; 723 regulator-max-microvolt = <3150000>; 724}; 725 726/* GPS LNA */ 727&vsim { 728 regulator-min-microvolt = <2800000>; 729 regulator-max-microvolt = <3150000>; 730}; 731 732/* Needed to power the DPI pins */ 733 734&vpll2 { 735 regulator-always-on; 736}; 737 738&dss { 739 pinctrl-names = "default"; 740 pinctrl-0 = < &dss_dpi_pins >; 741 742 status = "okay"; 743 vdds_dsi-supply = <&vpll2>; 744 745 port { 746 dpi_out: endpoint { 747 remote-endpoint = <&lcd_in>; 748 data-lines = <24>; 749 }; 750 }; 751}; 752 753&venc { 754 status = "okay"; 755 756 vdda-supply = <&vdac>; 757 758 port { 759 venc_out: endpoint { 760 remote-endpoint = <&opa_in>; 761 ti,channels = <1>; 762 ti,invert-polarity; 763 }; 764 }; 765}; 766 767&gpmc { 768 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ 769 770 nand@0,0 { 771 compatible = "ti,omap2-nand"; 772 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ 773 interrupt-parent = <&gpmc>; 774 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ 775 <1 IRQ_TYPE_NONE>; /* termcount */ 776 ti,nand-ecc-opt = "ham1"; 777 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ 778 nand-bus-width = <16>; 779 #address-cells = <1>; 780 #size-cells = <1>; 781 782 gpmc,device-width = <2>; 783 gpmc,cs-on-ns = <0>; 784 gpmc,cs-rd-off-ns = <44>; 785 gpmc,cs-wr-off-ns = <44>; 786 gpmc,adv-on-ns = <6>; 787 gpmc,adv-rd-off-ns = <34>; 788 gpmc,adv-wr-off-ns = <44>; 789 gpmc,oe-off-ns = <54>; 790 gpmc,we-off-ns = <40>; 791 gpmc,access-ns = <64>; 792 gpmc,rd-cycle-ns = <82>; 793 gpmc,wr-cycle-ns = <82>; 794 gpmc,wr-access-ns = <40>; 795 gpmc,wr-data-mux-bus-ns = <0>; 796 gpmc,sync-clk-ps = <0>; 797 798 x-loader@0 { 799 label = "X-Loader"; 800 reg = <0 0x80000>; 801 }; 802 803 bootloaders@80000 { 804 label = "U-Boot"; 805 reg = <0x80000 0x1c0000>; 806 }; 807 808 bootloaders_env@240000 { 809 label = "U-Boot Env"; 810 reg = <0x240000 0x40000>; 811 }; 812 813 kernel@280000 { 814 label = "Kernel"; 815 reg = <0x280000 0x600000>; 816 }; 817 818 filesystem@880000 { 819 label = "File System"; 820 reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */ 821 }; 822 }; 823}; 824 825&mcbsp1 { /* FM Transceiver PCM */ 826 status = "okay"; 827 #sound-dai-cells = <0>; 828 pinctrl-names = "default"; 829 pinctrl-0 = <&mcbsp1_pins>; 830}; 831 832&mcbsp2 { /* TPS65950 I2S */ 833 status = "okay"; 834 pinctrl-names = "default"; 835 pinctrl-0 = <&mcbsp2_pins>; 836}; 837 838&mcbsp3 { /* Bluetooth PCM */ 839 status = "okay"; 840 #sound-dai-cells = <0>; 841 pinctrl-names = "default"; 842 pinctrl-0 = <&mcbsp3_pins>; 843}; 844 845&mcbsp4 { /* GSM voice PCM */ 846 status = "okay"; 847 #sound-dai-cells = <0>; 848 pinctrl-names = "default"; 849 pinctrl-0 = <&mcbsp4_pins>; 850}; 851 852&hdqw1w { 853 pinctrl-names = "default"; 854 pinctrl-0 = <&hdq_pins>; 855}; 856 857/* image signal processor within OMAP3 SoC */ 858&isp { 859 ports { 860 port@0 { 861 reg = <0>; 862 parallel_ep: endpoint { 863 ti,isp-clock-divisor = <1>; 864 ti,strobe-mode; 865 bus-width = <8>;/* Used data lines */ 866 data-shift = <2>; /* Lines 9:2 are used */ 867 hsync-active = <0>; /* Active low */ 868 vsync-active = <1>; /* Active high */ 869 data-active = <1>;/* Active high */ 870 pclk-sample = <1>;/* Falling */ 871 }; 872 }; 873 /* port@1 and port@2 are not used by GTA04 */ 874 }; 875}; 876