1* galaxycore,gc4c33 MIPI sensor 2 3Required Properties: 4- compatible: should be "galaxycore,gc4c33" 5- clocks: reference to the 27M xvclk input clock. 6- clock-names: should be "xvclk". 7- dovdd-supply: Digital I/O voltage supply, 1.8 volts 8- avdd-supply: Analog voltage supply, 2.8 volts 9- dvdd-supply: Digital core voltage supply, 1.2 volts 10- reset-gpios: High active reset gpio 11 12Attention: 13GC4C33 device address 0x29(7bit) 14 15Example: 16&i2c1 { 17 status = "okay"; 18 gc4c33: gc4c33@29 { 19 compatible = "galaxycore,gc4c33"; 20 reg = <0x29>; 21 clocks = <&cru CLK_MIPICSI_OUT>; 22 clock-names = "xvclk"; 23 power-domains = <&power RV1126_PD_VI>; 24 pinctrl-names = "rockchip,camera_default"; 25 pinctrl-0 = <&mipicsi_clk0>; 26 avdd-supply = <&vcc_avdd>; 27 dovdd-supply = <&vcc_dovdd>; 28 dvdd-supply = <&vcc_dvdd>; 29 pwdn-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>; 30 reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; 31 rockchip,camera-module-index = <1>; 32 rockchip,camera-module-facing = "front"; 33 rockchip,camera-module-name = "PCORW0009A"; 34 rockchip,camera-module-lens-name = "40IRC-4M"; 35 /* NO_HDR:0 HDR_X2:5 HDR_X3:6 */ 36 rockchip,camera-hdr-mode = <0>; 37 port { 38 sc4238_out: endpoint { 39 remote-endpoint = <&mipi_in_ucam1>; 40 data-lanes = <1 2>; 41 }; 42 }; 43 }; 44}; 45