1 /****************************************************************************** 2 * 3 * Copyright(c) 2007 - 2017 Realtek Corporation. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of version 2 of the GNU General Public License as 7 * published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 *****************************************************************************/ 15 #ifndef __RTL8192F_LED_H__ 16 #define __RTL8192F_LED_H__ 17 18 #include <drv_conf.h> 19 #include <osdep_service.h> 20 #include <drv_types.h> 21 22 #ifdef CONFIG_RTW_SW_LED 23 /* ******************************************************************************** 24 * Interface to manipulate LED objects. 25 * ******************************************************************************** */ 26 #ifdef CONFIG_USB_HCI 27 /** REG_LED_CFG (0x4C) **/ 28 /* LED0 GPIO Enable, 0: disable, 1: enable*/ 29 #define LED0_GPIO_ENABLE_8192FU (BIT21) 30 /* LED0 Disabled for analog signal usage, 0:Enable (output mode), 1: disable (input mode) */ 31 #define LED0_DISABLE_ANALOGSIGNAL_8192FU (BIT7) 32 /* LED0 software value, 0: turn off, 1:turn on */ 33 #define LED0_SW_VALUE_8192FU (BIT3) 34 35 /** REG_GPIO_MUXCFG (0x40) **/ 36 /* Enable LED[1:0] for RFE CTRL[7:6], 0: BT, 1: Wi-Fi */ 37 #define ENABLE_LED0_AND_LED1_CTRL_BY_WIFI_8192FU (BIT3) 38 39 /** REG_SW_GPIO_SHARE_CTRL_0 (0x1038) **/ 40 /* LED Output PIN Location, 0: GPIOA_0, 1:GPIOB_4*/ 41 #define LED_OUTPUT_PIN_LOCATION_8192FU (BIT16) 42 43 u8 rtl8192fu_CfgLed0Hw(PADAPTER padapter); 44 void rtl8192fu_InitSwLeds(PADAPTER padapter); 45 void rtl8192fu_DeInitSwLeds(PADAPTER padapter); 46 #endif 47 48 #ifdef CONFIG_SDIO_HCI 49 void rtl8192fs_InitSwLeds(PADAPTER padapter); 50 void rtl8192fs_DeInitSwLeds(PADAPTER padapter); 51 #endif 52 53 #ifdef CONFIG_PCI_HCI 54 void rtl8192fe_InitSwLeds(PADAPTER padapter); 55 void rtl8192fe_DeInitSwLeds(PADAPTER padapter); 56 #endif 57 #endif /*#ifdef CONFIG_RTW_SW_LED*/ 58 59 #endif 60