xref: /OK3568_Linux_fs/external/rkwifibt/drivers/infineon/include/802.11s.h (revision 4882a59341e53eb6f0b4789bf948001014eff981)
1 /*
2  * Fundamental types and constants relating to 802.11s Mesh
3  *
4  * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
5  *
6  * Copyright (C) 1999-2017, Broadcom Corporation
7  *
8  *      Unless you and Broadcom execute a separate written software license
9  * agreement governing use of this software, this software is licensed to you
10  * under the terms of the GNU General Public License version 2 (the "GPL"),
11  * available at http://www.broadcom.com/licenses/GPLv2.php, with the
12  * following added to such license:
13  *
14  *      As a special exception, the copyright holders of this software give you
15  * permission to link this software with independent modules, and to copy and
16  * distribute the resulting executable under terms of your choice, provided that
17  * you also meet, for each linked independent module, the terms and conditions of
18  * the license of that module.  An independent module is a module which is not
19  * derived from this software.  The special exception does not apply to any
20  * modifications of the software.
21  *
22  *      Notwithstanding the above, under no circumstances may you combine this
23  * software in any way with any other Broadcom software provided under a license
24  * other than the GPL, without Broadcom's express prior written consent.
25  *
26  *
27  * <<Broadcom-WL-IPTag/Open:>>
28  *
29  * $Id$
30  */
31 
32 #ifndef _802_11s_h_
33 #define _802_11s_h_
34 
35 /* This marks the start of a packed structure section. */
36 #include <packed_section_start.h>
37 
38 #define DOT11_MESH_FLAGS_AE_MASK	0x3
39 #define DOT11_MESH_FLAGS_AE_SHIFT	0
40 
41 #define DOT11_MESH_CONNECTED_AS_SET         7
42 #define DOT11_MESH_NUMBER_PEERING_SET       1
43 #define DOT11_MESH_MESH_GWSET               0
44 
45 #define DOT11_MESH_ACTION_LINK_MET_REP      0
46 #define DOT11_MESH_ACTION_PATH_SEL          1
47 #define DOT11_MESH_ACTION_GATE_ANN          2
48 #define DOT11_MESH_ACTION_CONG_CONT_NOTIF   3
49 #define DOT11_MESH_ACTION_MCCA_SETUP_REQ    4
50 #define DOT11_MESH_ACTION_MCCA_SETUP_REP    5
51 #define DOT11_MESH_ACTION_MCCA_ADVT_REQ     6
52 #define DOT11_MESH_ACTION_MCCA_ADVT         7
53 #define DOT11_MESH_ACTION_MCCA_TEARDOWN     8
54 #define DOT11_MESH_ACTION_TBTT_ADJ_REQ      9
55 #define DOT11_MESH_ACTION_TBTT_ADJ_RESP     10
56 
57 /* self-protected action field values: 7-57v24 */
58 #define DOT11_SELFPROT_ACTION_MESH_PEER_OPEN    1
59 #define DOT11_SELFPROT_ACTION_MESH_PEER_CONFM   2
60 #define DOT11_SELFPROT_ACTION_MESH_PEER_CLOSE   3
61 #define DOT11_SELFPROT_ACTION_MESH_PEER_GK_INF  4
62 #define DOT11_SELFPROT_ACTION_MESH_PEER_GK_ACK  5
63 
64 #define DOT11_MESH_AUTH_PROTO_NONE        0
65 #define DOT11_MESH_AUTH_PROTO_SAE         1
66 #define DOT11_MESH_AUTH_PROTO_8021X       2
67 #define DOT11_MESH_AUTH_PROTO_VS        255
68 
69 #define DOT11_MESH_PATHSEL_LEN   2
70 #define DOT11_MESH_PERR_LEN1     2   /* Least PERR length fixed */
71 #define DOT11_MESH_PERR_LEN2     13  /* Least PERR length variable */
72 #define DOT11_MESH_PREP_LEN      31  /* Least PREP length */
73 #define DOT11_MESH_PREQ_LEN      37  /* Least PREQ length */
74 
75 #define DOT11_MESH_PATHSEL_PROTID_HWMP    1
76 #define DOT11_MESH_PATHSEL_METRICID_ALM   1 /* Air link metric */
77 #define DOT11_MESH_CONGESTCTRL_NONE       0
78 #define DOT11_MESH_CONGESTCTRL_SP         1
79 #define DOT11_MESH_SYNCMETHOD_NOFFSET     1
80 
81 BWL_PRE_PACKED_STRUCT struct dot11_meshctrl_hdr {
82 	uint8               flags;      /* flag bits such as ae etc */
83 	uint8               ttl;        /* time to live */
84 	uint32              seq;        /* sequence control */
85 	struct ether_addr   a5;         /* optional address 5 */
86 	struct ether_addr   a6;         /* optional address 6 */
87 } BWL_POST_PACKED_STRUCT;
88 
89 /* Mesh Path Selection Action Frame */
90 BWL_PRE_PACKED_STRUCT struct dot11_mesh_pathsel {
91 	uint8   category;
92 	uint8   meshaction;
93 	uint8   data[];
94 } BWL_POST_PACKED_STRUCT;
95 typedef struct dot11_mesh_pathsel dot11_mesh_pathsel_t;
96 
97 /*  Mesh PREQ IE */
98 BWL_PRE_PACKED_STRUCT struct mesh_preq_ie {
99 	uint8   id;
100 	uint8   len;
101 	uint8   flags;
102 	uint8   hop_count;
103 	uint8   ttl;
104 	uint32  pathdis_id;
105 	struct  ether_addr  originator_addr;
106 	uint32  originator_seq;
107 	union {
108 		BWL_PRE_PACKED_STRUCT struct {
109 			struct ether_addr target_ext_add;
110 			uint32  lifetime;
111 			uint32  metric;
112 			uint8   target_count;
113 			uint8   data[];
114 		} BWL_POST_PACKED_STRUCT oea;
115 
116 		BWL_PRE_PACKED_STRUCT struct {
117 			uint32  lifetime;
118 			uint32  metric;
119 			uint8   target_count;
120 			uint8   data[];
121 		} BWL_POST_PACKED_STRUCT noea;
122 	} u;
123 } BWL_POST_PACKED_STRUCT;
124 typedef struct mesh_preq_ie mesh_preq_ie_t;
125 
126 /* Target info (part of Mesh PREQ IE) */
127 BWL_PRE_PACKED_STRUCT struct mesh_targetinfo {
128 	uint8	target_flag;
129 	struct	ether_addr	target_addr;
130 	uint32	target_seq;
131 } BWL_POST_PACKED_STRUCT;
132 typedef struct mesh_targetinfo mesh_targetinfo_t;
133 
134 /* Mesh PREP IE */
135 BWL_PRE_PACKED_STRUCT struct mesh_prep_ie {
136 	uint8	id;
137 	uint8	len;
138 	uint8	flags;
139 	uint8	hop_count;
140 	uint8	ttl;
141 	struct	ether_addr	target_addr;
142 	uint32	target_seq;
143 	union {
144 		BWL_PRE_PACKED_STRUCT struct {
145 			struct ether_addr target_ext_add;
146 			uint32  lifetime;
147 			uint32  metric;
148 			uint8   target_count;
149 	                struct	ether_addr	originator_addr;
150 	                uint32	originator_seq;
151 		} BWL_POST_PACKED_STRUCT oea;
152 
153 		BWL_PRE_PACKED_STRUCT struct {
154 			uint32  lifetime;
155 			uint32  metric;
156 			uint8   target_count;
157 	                struct	ether_addr	originator_addr;
158 	                uint32	originator_seq;
159 		} BWL_POST_PACKED_STRUCT noea;
160 	} u;
161 } BWL_POST_PACKED_STRUCT;
162 typedef struct mesh_prep_ie mesh_prep_ie_t;
163 
164 /* Mesh PERR IE */
165 struct mesh_perr_ie {
166 	uint8	id;
167 	uint8	len;
168 	uint8	ttl;
169 	uint8	num_dest;
170 	uint8	data[];
171 };
172 typedef struct mesh_perr_ie mesh_perr_ie_t;
173 
174 /* Destination info is part of PERR IE */
175 BWL_PRE_PACKED_STRUCT struct mesh_perr_destinfo {
176 	uint8	flags;
177 	struct	ether_addr	destination_addr;
178 	uint32	dest_seq;
179 	union {
180 		BWL_PRE_PACKED_STRUCT struct {
181 			struct  ether_addr      dest_ext_addr;
182 		} BWL_POST_PACKED_STRUCT dea;
183 
184 		BWL_PRE_PACKED_STRUCT struct {
185 		/* 1 byte reason code to be populated manually in software */
186 			uint16	reason_code;
187 		} BWL_POST_PACKED_STRUCT nodea;
188 	} u;
189 } BWL_POST_PACKED_STRUCT;
190 typedef struct mesh_perr_destinfo mesh_perr_destinfo_t;
191 
192 /* Mesh peering action frame hdr */
193 BWL_PRE_PACKED_STRUCT struct mesh_peering_frmhdr {
194 	uint8	category;
195 	uint8	action;
196 	union	{
197 		struct {
198 			uint16	capability;
199 		} open;
200 		struct {
201 			uint16	capability;
202 			uint16	AID;
203 		} confirm;
204 		uint8 data[1];
205 	} u;
206 } BWL_POST_PACKED_STRUCT;
207 typedef struct mesh_peering_frmhdr mesh_peering_frmhdr_t;
208 
209 /* Mesh peering mgmt IE */
210 BWL_PRE_PACKED_STRUCT struct mesh_peer_mgmt_ie_common {
211 	uint16	mesh_peer_prot_id;
212 	uint16	local_link_id;
213 } BWL_POST_PACKED_STRUCT;
214 typedef struct mesh_peer_mgmt_ie_common mesh_peer_mgmt_ie_common_t;
215 #define MESH_PEER_MGMT_IE_OPEN_LEN	(4)
216 
217 BWL_PRE_PACKED_STRUCT struct mesh_peer_mgmt_ie_cfm {
218 	mesh_peer_mgmt_ie_common_t	common;
219 	uint16	peer_link_id;
220 } BWL_POST_PACKED_STRUCT;
221 typedef struct mesh_peer_mgmt_ie_cfm mesh_peer_mgmt_ie_cfm_t;
222 #define MESH_PEER_MGMT_IE_CONF_LEN	(6)
223 
224 BWL_PRE_PACKED_STRUCT struct mesh_peer_mgmt_ie_close {
225 	mesh_peer_mgmt_ie_common_t	common;
226 	/* uint16	peer_link_id;
227 	* simplicity: not supported, TODO for future
228 	*/
229 	uint16	reason_code;
230 } BWL_POST_PACKED_STRUCT;
231 typedef struct mesh_peer_mgmt_ie_close mesh_peer_mgmt_ie_close_t;
232 #define MESH_PEER_MGMT_IE_CLOSE_LEN	(6)
233 
234 struct mesh_config_ie {
235 	uint8	activ_path_sel_prot_id;
236 	uint8	activ_path_sel_metric_id;
237 	uint8	cong_ctl_mode_id;
238 	uint8	sync_method_id;
239 	uint8	auth_prot_id;
240 	uint8	mesh_formation_info;
241 	uint8	mesh_cap;
242 };
243 typedef struct mesh_config_ie mesh_config_ie_t;
244 #define MESH_CONFIG_IE_LEN	(7)
245 
246 /* Mesh peering states */
247 #define MESH_PEERING_IDLE               0
248 #define MESH_PEERING_OPEN_SNT           1
249 #define MESH_PEERING_CNF_RCVD           2
250 #define MESH_PEERING_OPEN_RCVD          3
251 #define MESH_PEERING_ESTAB              4
252 #define MESH_PEERING_HOLDING            5
253 #define MESH_PEERING_LAST_STATE         6
254 /* for debugging: mapping strings */
255 #define MESH_PEERING_STATE_STRINGS \
256 	{"IDLE  ", "OPNSNT", "CNFRCV", "OPNRCV", "ESTAB ", "HOLDNG"}
257 
258 typedef BWL_PRE_PACKED_STRUCT struct mesh_peer_info {
259 	/* mesh_peer_instance as given in the spec. Note that, peer address
260 	 * is stored in scb
261 	 */
262 	uint16	mesh_peer_prot_id;
263 	uint16	local_link_id;
264 	uint16	peer_link_id;
265 	/* AID generated by *peer* to self & received in peer_confirm */
266 	uint16  peer_aid;
267 
268 	/* TODO: no mention in spec? possibly used in PS case. Note that aid generated
269 	* from self to peer is stored in scb.
270 	*/
271 	uint8   state;
272 	/* TODO: struct mesh_peer_info *next; this field is required
273 	 * if multiple peerings per same src is allowed, which is
274 	 * true as per spec.
275 	 */
276 } BWL_POST_PACKED_STRUCT mesh_peer_info_t;
277 
278 /* once an entry is added into mesh_peer_list, if peering is lost, it will
279 * get retried for peering, MAX_MESH_PEER_ENTRY_RETRIES times. after wards, it
280 * wont get retried and will be moved to MESH_PEER_ENTRY_STATE_TIMEDOUT state,
281 * until user adds it again explicitely, when its entry_state is changed
282 * to MESH_PEER_ENTRY_STATE_ACTIVE and tried again.
283 */
284 #define MAX_MESH_SELF_PEER_ENTRY_RETRIES	3
285 #define MESH_SELF_PEER_ENTRY_STATE_ACTIVE	1
286 #define MESH_SELF_PEER_ENTRY_STATE_TIMEDOUT	2
287 
288 /** Mesh Channel Switch Parameter IE data structure */
289 BWL_PRE_PACKED_STRUCT struct dot11_mcsp_body {
290 	uint8 ttl;           /* remaining number of hops allowed for this element. */
291 	uint8 flags;         /* attributes of this channel switch attempt */
292 	uint8 reason;        /* reason for the mesh channel switch */
293 	uint16 precedence;    /* random value in the range 0 to 65535 */
294 } BWL_POST_PACKED_STRUCT;
295 
296 #define DOT11_MCSP_TTL_DEFAULT          1
297 #define DOT11_MCSP_FLAG_TRANS_RESTRICT	0x1	/* no transmit except frames with mcsp */
298 #define DOT11_MCSP_FLAG_INIT		0x2	/* initiates the channel switch attempt */
299 #define DOT11_MCSP_FLAG_REASON		0x4	/* validity of reason code field */
300 #define DOT11_MCSP_REASON_REGULATORY	0	/* meet regulatory requirements */
301 #define DOT11_MCSP_REASON_UNSPECIFIED	1	/* unspecified reason */
302 
303 BWL_PRE_PACKED_STRUCT struct dot11_mesh_csp {
304 	uint8 id; /* id DOT11_MNG_MESH_CSP_ID */
305 	uint8 len; /* length of IE */
306 	struct dot11_mcsp_body body; /* body of the ie */
307 } BWL_POST_PACKED_STRUCT;
308 typedef struct dot11_mesh_csp dot11_mesh_csp_ie_t;
309 #define DOT11_MESH_CSP_IE_LEN    5       /* length of mesh channel switch parameter IE body */
310 
311 /* This marks the end of a packed structure section. */
312 #include <packed_section_end.h>
313 
314 #endif  /* #ifndef _802_11s_H_ */
315