1OMAP5432 uEVM 2============= 3 4This file documents the Buildroot support for the OMAP5432 uEVM[1], a 5single-board computer development platform based on the Texas Instruments 6OMAP5432 system on a chip (SoC). 7 8How to build 9============ 10 11 $ make uevm5432_defconfig 12 $ make 13 14How to write the SD card 15======================== 16 17Once the build process is finished you will have an image called "sdcard.img" 18in the output/images/ directory. 19 20Copy the bootable "sdcard.img" onto an SD card with "dd": 21 22 $ sudo dd if=output/images/sdcard.img of=/dev/sdX 23 $ sync 24 25Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX instead 26depending on setup). 27 28To boot from SD card, set the SYSBOOT switches S1 of your OMAP5432 uEVM to the 29following position: 30 31 ON x x 32 x x 33 1 2 3 4 34 35Insert the micro SDcard in your OMAP5432 uEVM, and power it up with the POWER 36ON push button switch S3. The console is on the micro USB Debug UART, with 37serial settings 115200 8N1. Refer also to the quick start guide[2]. 38 39[1]: https://svtronics.com/5432 40[2]: https://www.ti.com/lit/ug/swcu131/swcu131.pdf 41